The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels
Digital Thermostat
The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces.
Unique Features
Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi.
Power supply
Water temp
Liters
US Gallons
COP***
50Hz
25°C*
2000
530
2,49
50Hz
8°C**
300
105
1,70
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
350W
R290
47,2 lb
10°C - 38°C
ll data are approximate and may be changed without notice by TECO
Technical Details
Supply
230V-50Hz
Cooling Power Consumption
350 w
Ecological Refrigerant
R290
Min and Max Flow Rate
500 l/h - 800 l/h
Tank Size
up to 2000 l (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)
Dimensions (millimeters)
310 (w) x 310 (d) x 500 (h)
Dimensions (inches)
12.2 (w) x 12.2 (d) x 19.69 (h)
Weight
21.4 kg
Connections
fitting 3/4" - 16mm int. tube diameter
The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels
Digital Thermostat
The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces.
Unique Features
Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi.
Power supply
Water temp
Liters
US Gallons
COP***
50Hz
25°C*
2000
530
2,49
50Hz
8°C**
300
105
1,70
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
350W
R290
47,2 lb
10°C - 38°C
ll data are approximate and may be changed without notice by TECO
Technical Details
Supply
230V-50Hz
Cooling Power Consumption
350 w
Ecological Refrigerant
R290
Min and Max Flow Rate
500 l/h - 800 l/h
Tank Size
up to 2000 l (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)
Dimensions (millimeters)
310 (w) x 310 (d) x 500 (h)
Dimensions (inches)
12.2 (w) x 12.2 (d) x 19.69 (h)
Weight
21.4 kg
Connections
fitting 3/4" - 16mm int. tube diameter
The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - Coefficient Of Performance and the lowest noise levels
Digital Thermostat
The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces.
Unique Features
Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi.
Power supply
Water temp
Litres
US Gallons
COP***
50Hz
25°C*
500
130
1,83
50Hz
8°C**
100
250
1,09
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt.** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt.*** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
240W
R290
36,4 lb
10°C - 38°C
ll data are approximate and may be changed without notice by TECO
Technical Details
Supply
230V-50Hz
Cooling Power Consumption
240 w
Ecological Refrigerant
R290
Min and Max Flow Rate
500 l/h - 800 l/h
Tank Size
up to 500 l (water temp. 25°C - Room temp. 30°C - Heating load 0.5 w/l)
Dimensions (millimeters)
310 (w) x 310 (d) x 416 (h)
Dimensions (inches)
12.2 (w) x 12.2 (d) x 16.38 (h)
Weight
16.5 kg
Connections
fitting 3/4" - 16mm int. tube diameter
The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - Coefficient Of Performance and the lowest noise levels
Digital Thermostat
The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces.
Unique Features
Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi.
Power supply
Water temp
Liters
US Gallons
COP***
50Hz
25°C*
500
130
1,83
50Hz
8°C**
100
250
1,09
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
240W
R290
36,4 lb
10°C - 38°C
ll data are approximate and may be changed without notice by TECO
Technical Details
Supply
230V-50Hz
Cooling Power Consumption
240 w
Ecological Refrigerant
R290
Min and Max Flow Rate
500 l/h - 800 l/h
Tank Size
up to 500 l (water temp. 25°C - Room temp. 30°C - Heating load 0.5 w/l)
Dimensions (millimeters)
310 (w) x 310 (d) x 416 (h)
Dimensions (inches)
12.2 (w) x 12.2 (d) x 16.38 (h)
Weight
16.5 kg
Connections
fitting 3/4" - 16mm int. tube diameter
The exclusive use of internationally recognised high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to remarkable energy savings
Digital Thermostat
he setting of functions is intuitive and the temperature reading is accurate, resolution 0.1 °C/0.2°F. The setting range is 5°C - 35°C (41°F - 95°F) and the temperature is kept constant with a maximum differential of 0.5°C/1°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller is characterized by a solid structure designed to provide a perfect protection against oxidation and it is therefore perfect to be used with salt water.
Unique Features
These units are also suitable for industrial applications. The maintenance of the air filter is quick and easy. These units have the option of up to 4 x 400W heaters to be fitted, please ask for pricing
Water temp.
Liters
US Gallons
COP**
25°C*
9000
2370
2,6
8°C*
1800
470
1,4
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt.** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt.*** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
1200W
R410A
104 lb
5°C - 38°C
ll data are approximate and may be changed without notice by TECO. * Stripped cable
The 316148 Replacement Sleeve Cup Nut is selected or designed with the highest quality and exacting specification for trouble free installation and operation. UV Superstore, Inc. provides replacement parts, spare components, and consumables for use in most ultraviolet systems. These replacement parts are either from the OEM or a premium quality replacement.
UK 3-pin plug to IEC C13 socket.
Ideal for overhead projectors, schools etc.
Plug has an integral, 13A fuse
BS1363 compliant
Applications
Power Management, Energy, Hobby & Education, Office, Passives
The Unimer Mooring Compensator provides cushioned relief for mooring lines, pier and deck fittings.
The compensator is design protected and features a cleat shaped locking mechanism that prevents slipping. The self-locking internal elements in black polyamide stop chafed lines completely. This increases your lines life span and ensures efficient relief.
The compensator comes in four different sizes, so you can choose the best fit for your boat. The same compensator size takes different line diameters, allowing you to vary your lines with changing conditions.
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filteR.
Description
The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges. Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.
ConstructionFiltration Media: Polypropylene End caps and Adapters: Polypropylene
Operating LimitsMaximum Differential Pressure:35psi (2.4bar) at =100°F (38°C) Maximum Temperature: 160°F (71°C) at =15psid (1.0bar) Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filteR.
Description
The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges. Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.
ConstructionFiltration Media: Polypropylene End caps and Adapters: Polypropylene
Operating LimitsMaximum Differential Pressure:35psi (2.4bar) at =100°F (38°C) Maximum Temperature: 160°F (71°C) at =15psid (1.0bar) Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
High-Quality Replacement Cartridges
Aquafilter FCPS5M20B FCCBL20BB FCCST20B Big Blue 20" Replacement cartridges Set is designed to ensure the highest level of water filtration in your home or office. These cartridges are constructed with premium materials that effectively remove contaminants such as sediment, chlorine, and other impurities from your water supply. With this set, you can enjoy clean and fresh-tasting water without compromising on quality.
Compatible with Big Blue Systems
These replacement cartridges are specifically designed to fit Big Blue 20" filtration systems, making it easy to upgrade or replace your current filter setup. The Aquafilter FCPS5M20B FCCBL20BB FCCST20B cartridges are compatible with a variety of water filter brands, ensuring versatility and ease of use. Simply install these cartridges into your system for efficient and reliable water filtration.
Long-Lasting Performance
With a focus on durability and longevity, the Aquafilter FCPS5M20B FCCBL20BB FCCST20B cartridges are built to last. Each cartridge is engineered to deliver consistent performance over time, providing you with long-lasting filtration benefits. Say goodbye to frequent cartridge replacements and enjoy hassle-free water filtration with this reliable set.
Aquafilter set of 3 Big Blue 20" replacement cartridges set:
FCPP5M20B- sediment 5 micron polypropylene yarn cartridges
PRISM Plus carbon block
FCCST20B- water softening cartridge
Filter Life: 6-12 months or 257000 litres
This 25W UV unit with full WRAS approval is ideal for 1-3 bedroom homes with no more than 1 bathroom. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 1m³/hour and are fine to be left turned on for long periods (overnight for example).
This system comes with everything you need to fit and run the system for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 25W UV unit with full WRAS approval is ideal for 1-3 bedroom homes with no more than 1 bathroom. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 1m³/hour and are fine to be left turned on for long periods (overnight for example).
This system comes with everything you need to fit and run the system for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 25W UV unit with full WRAS approval is ideal for 1-3 bedroom homes with no more than 1 bathroom. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 1m³/hour and are fine to be left turned on for long periods (overnight for example).
This system comes with everything you need to fit and run the system for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 85W UV unit with full WRAS approval is ideal for commercial and light industrial applications. They're great for multi-residency water treatment plants, building services and process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 225l/min or 13.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 85W UV unit with full WRAS approval is ideal for commercial and light industrial applications. They're great for multi-residency water treatment plants, building services and process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 225l/min or 13.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 85W UV unit with full WRAS approval is ideal for commercial and light industrial applications. They're great for multi-residency water treatment plants, building services and process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 225l/min or 13.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for family homes with more than 4 bedrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 75l/min or 4.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for family homes with more than 4 bedrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 75l/min or 4.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
