Enhance Your Aquarium Water Quality
Upgrade your aquarium system with a set of 2 replaceable in-line cartridges designed for the RX-AFRO3-AQ RO system. These cartridges utilize reverse osmosis technology to effectively remove sediment and impurities from your water, providing a cleaner and healthier environment for your aquatic pets.
Efficient Sediment Removal
With a focus on sediment removal, these cartridges ensure that your aquarium water is crystal clear and free of debris. The innovative design allows for easy installation and replacement, making maintenance a breeze. Say goodbye to cloudy water and hello to a pristine aquatic habitat.
Long-lasting Performance
Each cartridge in this set is built to last, providing you with reliable and consistent results for your aquarium system. Enjoy peace of mind knowing that your water filtration needs are taken care of with these high-quality in-line cartridges. Invest in the health of your aquatic friends with this essential filtration solution.
Keep your domestic reverse osmosis water filtration system performing at its best with the Aquafilter 6 Stage Replacement Filter Kit, complete with RO membrane.
This comprehensive six-stage replacement filter set contains all the essential filtration components needed for routine maintenance of a compatible 6-stage reverse osmosis system.
Combining sediment filtration, dual activated carbon filtration, reverse osmosis membrane technology, post-carbon filtration and mineralisation, this complete replacement kit offers a convenient way to maintain your domestic drinking water filtration system.
Whether you're carrying out scheduled filter maintenance or replacing an existing RO membrane, this Aquafilter replacement set provides all six filtration stages in one convenient package.
What's Included? – Complete 6 Stage Filtration Set
Stage 1 – 10 Micron Sediment Filter
The first stage of filtration helps remove suspended particles such as sand, rust, sediment and other larger impurities from incoming water. This helps protect the subsequent filtration cartridges and RO membrane.
Stage 2 – Activated Carbon Block Filter
Helps reduce chlorine, organic compounds and other substances that can affect the taste and odour of drinking water.
Stage 3 – Activated Carbon Block Filter
Provides an additional carbon filtration stage to help reduce remaining chlorine and unwanted compounds before water reaches the reverse osmosis membrane.
Stage 4 – Reverse Osmosis Membrane
The central filtration component of the reverse osmosis system. The RO membrane uses semi-permeable membrane technology to reduce dissolved salts and a wide range of unwanted contaminants from water.
Including the replacement membrane means you can renew the main filtration component alongside your pre-filters.
Stage 5 – Post Carbon Filter
Provides final carbon filtration to help improve the taste and freshness of treated drinking water before it reaches your tap.
Stage 6 – AIMRO Mineral Cartridge
The AIMRO mineralisation cartridge is designed to add minerals back into the filtered water as part of the final treatment process.
Key Benefits of the Aquafilter 6 Stage Replacement Kit
Complete six-stage reverse osmosis replacement filter set.
Replacement RO membrane included.
10 micron sediment pre-filter.
Dual activated carbon block filtration.
Post-carbon filter for improved water taste.
AIMRO mineral cartridge included.
Convenient all-in-one RO system maintenance solution.
Suitable for compatible domestic reverse osmosis systems.
Compatibility
This Aquafilter replacement filter kit is designed for compatible 6-stage domestic reverse osmosis water filtration systems.
It may also be suitable for other RO systems using matching filter specifications, cartridge dimensions and connections.
Before ordering, we recommend checking your existing filter configuration and connections to ensure compatibility.
When Should You Replace Your Reverse Osmosis Filters?
Regular replacement of sediment and carbon filters is important for protecting the RO membrane and maintaining consistent filtration performance.
The reverse osmosis membrane also requires periodic replacement depending on incoming water quality, household consumption and operating conditions.
Always follow the manufacturer's recommended maintenance intervals for your particular system.
Complete Replacement Filters from GroAqua
Maintain your drinking water filtration system with quality Aquafilter replacement cartridges and reverse osmosis components.
Order your Aquafilter 6 Stage Replacement Filter Kit with RO Membrane from GroAqua and keep your domestic reverse osmosis system properly maintained.
Aquafilter 6 Stage Reverse Osmosis Replacement Filter Kit – Without RO Membrane
Keep your domestic reverse osmosis water filtration system performing at its best with the Aquafilter 6 Stage Replacement Filter Kit.
This replacement filter set contains five essential filtration cartridges for maintaining a compatible 6-stage reverse osmosis system. Featuring sediment filtration, dual activated carbon filtration, post-carbon treatment and mineralisation, this kit provides a convenient solution for routine RO system maintenance.
PLEASE NOTE: This replacement filter kit DOES NOT include the reverse osmosis (RO) membrane. It is ideal if your existing membrane is still in good working condition and you simply need to replace the other filter cartridges.
What's Included? – 6 Stage Filtration System
This replacement kit is designed for the following six-stage filtration configuration:
Stage 1 – 10 Micron Sediment Filter
The first stage of filtration helps remove suspended particles such as sand, rust, sediment and other larger impurities from incoming water. This helps protect the subsequent filtration cartridges and RO membrane.
Stage 2 – Activated Carbon Block Filter
Helps reduce chlorine, organic compounds and other substances that can affect the taste and odour of drinking water.
Stage 3 – Activated Carbon Block Filter
Provides an additional carbon filtration stage to help reduce remaining chlorine and unwanted compounds before water reaches the reverse osmosis membrane.
Stage 4 – Reverse Osmosis Membrane (NOT INCLUDED)
The RO membrane is the main filtration component of a reverse osmosis system. This replacement kit is supplied without the membrane, allowing you to retain your existing membrane if it remains suitable for continued use.
Stage 5 – Post Carbon Filter
Provides final carbon filtration to help improve the taste and freshness of treated drinking water before it reaches your tap.
Stage 6 – AIMRO Mineral Cartridge
The AIMRO mineral cartridge is designed to add minerals back into the filtered water as part of the final treatment process.
Key Benefits
Complete replacement cartridge set for a 6-stage RO system.
Five replacement cartridges supplied.
RO membrane not included.
10 micron sediment pre-filtration.
Dual activated carbon block filtration.
Post-carbon filtration for improved water taste.
AIMRO mineral cartridge included.
Convenient all-in-one replacement filter solution.
Suitable for compatible domestic reverse osmosis systems.
Compatibility
This Aquafilter replacement filter set is designed for compatible 6-stage domestic reverse osmosis water filtration systems.
The cartridges may also be suitable for other reverse osmosis systems using matching filter specifications, dimensions and connections.
Before ordering, please check your existing filter configuration and cartridge connections to ensure compatibility.
When Should You Replace Your RO Filters?
Regular replacement of sediment and carbon filters is important for protecting your reverse osmosis membrane and maintaining consistent filtration performance.
Replacement intervals depend on incoming water quality, household consumption and operating conditions.
If your existing RO membrane is still performing correctly, this replacement kit allows you to renew the other filtration cartridges without purchasing a new membrane.
Need a Replacement RO Membrane Too?
If your existing reverse osmosis membrane also requires replacement, take a look at our Aquafilter 6 Stage Replacement Filter Kit WITH RO Membrane.
This alternative includes the complete six-stage replacement configuration, including the RO membrane.
Buy Aquafilter Replacement Filters from GroAqua
Maintain your domestic drinking water filtration system with quality Aquafilter replacement cartridges and reverse osmosis components.
Order your Aquafilter 6 Stage Replacement Filter Kit from GroAqua and keep your reverse osmosis system properly maintained.
Keep your domestic reverse osmosis water filtration system performing at its best with the Aquafilter 7 Stage 12-Month Service Kit, complete with a replacement 75 GPD reverse osmosis membrane.
Designed for compatible 7-stage domestic reverse osmosis systems, this comprehensive service kit contains seven replacement filtration components, providing a convenient solution for routine filter and membrane maintenance.
Combining bacteriostatic sediment filtration, granular activated carbon, activated carbon block technology, reverse osmosis membrane filtration, post-carbon treatment, mineralisation and additional ioniser technology, this Aquafilter replacement kit provides everything needed to service the seven filtration stages.
Whether you're carrying out your scheduled annual maintenance or replacing an ageing RO membrane, this complete Aquafilter service kit makes maintaining your drinking water filtration system straightforward.
What's Included? – Complete 7 Stage Replacement Filter Set
This Aquafilter 12-month service kit includes seven replacement components:
Stage 1 – FCPS5-AB Bacteriostatic / Antibacterial Sediment Filter
The first stage of filtration helps remove suspended particles, sediment and other physical impurities from incoming water.
The bacteriostatic treatment is designed to help inhibit bacterial growth within the filter media.
Stage 2 – FCCA Granular Activated Carbon (GAC) Filter
Uses granular activated carbon to help reduce chlorine, organic compounds and other substances that can affect the taste and odour of drinking water.
Stage 3 – FCCBL-G Activated Carbon Block Filter
Provides additional carbon filtration to help reduce remaining chlorine and unwanted compounds before water reaches the reverse osmosis membrane.
Stage 4 – 75 GPD Reverse Osmosis Membrane
The central filtration component of your reverse osmosis system.
This 75 GPD (gallons per day) membrane uses semi-permeable membrane technology to reduce dissolved salts and a wide range of unwanted substances from water.
Including the replacement membrane allows you to renew the main filtration component alongside the pre-filters as part of your system maintenance.
Stage 5 – AICRO Post Carbon Filter
Provides final carbon filtration to help improve the taste and freshness of treated drinking water before it reaches your drinking water tap.
Stage 6 – AIMRO Mineral Cartridge
The AIMRO mineral cartridge is designed to add minerals back into the filtered water as part of the final treatment process.
Stage 7 – AIFIR2000 Negative Ioniser Cartridge
An additional treatment cartridge incorporating Aquafilter's negative ionisation technology.
Key Benefits of the Aquafilter 12-Month Service Kit
Complete seven-stage reverse osmosis replacement kit.
Replacement 75 GPD RO membrane included.
Seven Aquafilter filtration components supplied.
FCPS5-AB bacteriostatic sediment cartridge.
FCCA granular activated carbon filter.
FCCBL-G activated carbon block filter.
AICRO post-carbon cartridge.
AIMRO mineral cartridge.
AIFIR2000 negative ioniser cartridge.
Convenient all-in-one annual maintenance solution.
Designed for compatible domestic reverse osmosis systems.
Compatible Reverse Osmosis Systems
This Aquafilter replacement filter set is designed for compatible 7-stage domestic reverse osmosis water filtration systems.
The kit includes standard Aquafilter replacement cartridges and a 75 GPD RO membrane.
Before ordering, we recommend checking your existing filter configuration, membrane dimensions, connections and specifications to ensure compatibility.
Please note that cartridge connections and configurations can vary between reverse osmosis systems.
Why Is Regular RO Filter Replacement Important?
Your reverse osmosis system relies on multiple filtration stages working together to maintain water quality and filtration performance.
Sediment and activated carbon pre-filters help protect the RO membrane, while the membrane itself provides the main reverse osmosis filtration process.
Post-carbon and mineralisation cartridges provide additional treatment to the filtered water.
Replacing filters and the membrane in accordance with the manufacturer's recommended maintenance schedule helps maintain consistent system performance and fresh-tasting drinking water.
Actual replacement intervals depend on incoming water quality, household consumption and operating conditions.
Complete Aquafilter Replacement Filters from GroAqua
Make routine reverse osmosis maintenance easier with this complete Aquafilter 7 Stage 12-Month Service Kit.
With seven replacement components, including a 75 GPD reverse osmosis membrane, this kit provides a convenient way to renew your domestic RO filtration system.
Shop online at GroAqua for Aquafilter replacement cartridges, reverse osmosis membranes and domestic water filtration components.
Keep your domestic reverse osmosis water filtration system properly maintained with the Aquafilter 7 Stage 12-Month Service Filter Kit.
Designed for compatible 7-stage domestic reverse osmosis systems, this comprehensive replacement cartridge set provides the essential filters needed for routine system maintenance.
Featuring bacteriostatic sediment filtration, granular activated carbon, activated carbon block, post-carbon filtration, mineralisation and additional negative ioniser technology, this Aquafilter service kit helps maintain filtration performance and fresh-tasting drinking water.
With six specialist Aquafilter replacement cartridges included, this convenient service pack makes routine reverse osmosis filter maintenance straightforward.
What's Included? – Aquafilter Replacement Cartridges
This 12-month service kit contains the following Aquafilter cartridges:
1. FCPS5-AB – Bacteriostatic / Antibacterial Sediment Filter
The first stage of filtration helps remove suspended particles and sediment from incoming water. The bacteriostatic treatment is designed to help inhibit bacterial growth within the filter media.
2. FCCA – Granular Activated Carbon (GAC) Filter
Uses granular activated carbon to help reduce chlorine, organic compounds and other substances that can affect the taste and odour of drinking water.
3. FCCBL-G – Activated Carbon Block Filter
Provides an additional carbon filtration stage to help reduce remaining chlorine and other unwanted compounds before water reaches the subsequent filtration stages.
4. AICRO – Post Carbon Filter
Provides final carbon filtration to help improve the taste and freshness of treated drinking water before it reaches your drinking water tap.
5. AIMRO – Mineral Cartridge
Designed to add minerals back into the filtered water as part of the final water treatment process.
6. AIFIR2000 – Negative Ioniser Cartridge
An additional treatment cartridge incorporating Aquafilter's negative ionisation technology.
Key Benefits of the Aquafilter 12-Month Service Kit
Genuine Aquafilter replacement cartridges.
Convenient 12-month service filter set.
Six specialist replacement cartridges included.
FCPS5-AB bacteriostatic sediment filtration.
FCCA granular activated carbon filtration.
FCCBL-G activated carbon block filtration.
AICRO post-carbon filter.
AIMRO mineral cartridge.
AIFIR2000 negative ioniser cartridge.
Designed for compatible 7-stage domestic reverse osmosis systems.
Convenient solution for routine RO system maintenance.
Compatible Reverse Osmosis Systems
This Aquafilter replacement filter set is designed for compatible 7-stage domestic reverse osmosis water filtration systems.
The cartridges may also be suitable for other systems using matching Aquafilter cartridge specifications and connections.
Before ordering, check your existing filter configuration, cartridge dimensions and connections to ensure compatibility.
Why Is Regular RO Filter Replacement Important?
Reverse osmosis systems rely on several filtration stages working together to maintain water quality and system performance.
Sediment and activated carbon filters help protect the downstream filtration components, while post-carbon and mineral cartridges provide additional water treatment.
Replacing your filters in accordance with the manufacturer's recommended maintenance schedule helps maintain consistent filtration performance and fresh-tasting drinking water.
Actual replacement intervals depend on incoming water quality, household water consumption and operating conditions.
Aquafilter Replacement Filters from GroAqua
Whether you're carrying out your annual reverse osmosis service or replacing individual filter cartridges, GroAqua offers a range of Aquafilter replacement filters and domestic water filtration components.
Choose the Aquafilter 7 Stage 12-Month Service Kit for a convenient replacement cartridge package designed to keep your domestic reverse osmosis system maintained.
Order online from GroAqua.
Keep your domestic reverse osmosis water filtration system performing at its best with the Aquafilter 7 Stage Replacement Filter Kit.
This comprehensive replacement filter set contains the essential filtration cartridges for maintaining a compatible 7-stage reverse osmosis system. Featuring sediment filtration, dual activated carbon filtration, post-carbon treatment, mineralisation and additional filtration technology, this kit provides a convenient solution for routine RO system maintenance.
Please note: This replacement kit DOES NOT include the reverse osmosis (RO) membrane. If you require a complete replacement set including the membrane, please see our alternative Aquafilter 7 Stage Replacement Filter Kit with Membrane.
What's Included? – 7 Stage Filtration Components
This Aquafilter replacement set includes:
Stage 1 – 5 Micron Sediment Filter
Helps remove suspended particles such as sand, rust, sediment and other larger impurities from incoming water, protecting the subsequent filtration stages.
Stage 2 – Activated Carbon Block Filter
Helps reduce chlorine, organic compounds and substances that can negatively affect the taste and odour of drinking water.
Stage 3 – Activated Carbon Block Filter
Provides an additional carbon filtration stage to help reduce remaining chlorine and other unwanted compounds before water reaches the RO membrane.
Stage 4 – Reverse Osmosis Membrane (NOT INCLUDED)
The RO membrane is the main filtration component of a reverse osmosis system. This replacement kit is supplied without the membrane, allowing you to retain your existing membrane if it remains suitable for continued use.
Stage 5 – Post Carbon Filter
Provides final carbon filtration to help improve the taste and freshness of treated drinking water.
Stage 6 – AIMRO Mineral Cartridge
A mineralisation cartridge designed to add minerals back into the filtered water.
Stage 7 – AIFIR-2000 Negative Ioniser
An additional filtration stage incorporating Aquafilter's negative ionisation cartridge technology.
Key Benefits
Complete 7-stage replacement filter configuration.
Six replacement filter cartridges supplied.
Compatible RO membrane can be retained if still serviceable.
5 micron sediment pre-filtration.
Dual activated carbon filtration.
Post-carbon filtration for improved water taste.
AIMRO mineral cartridge included.
AIFIR-2000 negative ioniser included.
Convenient replacement solution for domestic reverse osmosis systems.
Compatibility
Designed for compatible 7-stage domestic reverse osmosis water filtration systems using matching cartridge dimensions and connections.
The replacement cartridges may also be suitable for other reverse osmosis systems using compatible filter specifications and connections.
We recommend checking your existing filter configuration, cartridge dimensions and fittings before ordering.
When Should You Replace Your RO Filters?
Regular replacement of sediment and carbon filters is important for protecting your reverse osmosis membrane and maintaining consistent filtration performance.
Replacement intervals depend on incoming water quality, household consumption and the manufacturer's recommendations.
If your existing RO membrane is still performing correctly, this filter set allows you to replace the other filtration cartridges without purchasing a new membrane.
Need the Complete Kit Including the Membrane?
If your reverse osmosis membrane also needs replacing, take a look at our Aquafilter 7 Stage Replacement Filter Kit WITH RO Membrane.
Choose GroAqua for quality water filtration products, replacement cartridges and reverse osmosis system components.
Keep your drinking water filtration system performing at its best with the Aquafilter 7 Stage Reverse Osmosis Replacement Filter Kit.
This complete replacement filter set includes all seven filtration stages, including a replacement reverse osmosis (RO) membrane. Designed for compatible 7-stage domestic reverse osmosis systems, this kit provides everything you need for routine filter maintenance and to help maintain consistent water filtration performance.
Combining sediment filtration, activated carbon filtration, reverse osmosis membrane technology, mineralisation and final-stage filtration, this comprehensive replacement kit helps reduce unwanted impurities and maintain fresh, great-tasting drinking water.
Complete 7 Stage Filter Set
This replacement kit includes:
Stage 1 – 5 Micron Sediment FilterHelps remove sediment, rust, sand and other suspended particles from incoming water, protecting the subsequent filtration stages.
Stage 2 – Activated Carbon Block FilterHelps reduce chlorine, organic compounds and substances that can affect the taste and odour of drinking water.
Stage 3 – Activated Carbon Block FilterProvides an additional carbon filtration stage to help reduce remaining chlorine and other unwanted compounds before water reaches the RO membrane.
Stage 4 – Reverse Osmosis MembraneThe central filtration component of the system. Reverse osmosis membrane technology helps reduce dissolved salts and a wide range of unwanted contaminants.
Stage 5 – Post Carbon FilterProvides final carbon filtration to help improve the taste and freshness of the treated water.
Stage 6 – AIMRO Mineral CartridgeA mineralisation cartridge designed to add minerals back into the filtered water.
Stage 7 – AIFIR-2000 Negative IoniserAn additional filtration stage incorporating Aquafilter's negative ionisation cartridge technology.
Why Choose This Aquafilter Replacement Kit?
Complete seven-stage replacement filter set.
Includes the reverse osmosis membrane.
Sediment and dual activated carbon pre-filtration.
Replacement post-carbon filter for improved water taste.
AIMRO mineral cartridge included.
AIFIR-2000 negative ioniser included.
Convenient all-in-one filter maintenance solution.
Genuine Aquafilter filtration components.
Compatibility
Designed for compatible 7-stage domestic reverse osmosis water filtration systems using standard cartridge connections.
Before ordering, please check your existing filter configuration, cartridge dimensions and connections to ensure compatibility.
Please note: This is a replacement filter cartridge set, not a complete reverse osmosis system.
Maintain Your Reverse Osmosis System
Regular replacement of your RO filters and membrane is important for maintaining filtration performance and water quality.
Filter replacement intervals depend on incoming water quality, daily usage and manufacturer recommendations. Always follow the maintenance guidance for your particular reverse osmosis system.
Order your Aquafilter 7 Stage Replacement Filter Kit from GroAqua and keep your domestic reverse osmosis system properly maintained.
Enjoy convenient access to purified drinking water at home with the Ecosoft Standard PRO Reverse Osmosis System with Mineralisation. Designed for installation beneath the kitchen sink, this five-stage domestic water filtration system combines sediment filtration, activated carbon treatment, reverse osmosis membrane technology and a final mineralisation stage.
The system is designed to reduce a wide range of unwanted substances in mains water, including suspended particles, chlorine and dissolved impurities. Its 50 GPD reverse osmosis membrane provides a nominal production capacity of up to 190 litres per day, while the integrated storage tank keeps purified water available when you need it.
A final mineralisation stage adds minerals back into the treated water, helping to improve its taste after reverse osmosis filtration.
With no electrical supply or booster pump required, the Ecosoft Standard PRO is a practical under-sink drinking water solution for households with suitable mains water pressure.
Five-stage reverse osmosis water filtration
The Ecosoft Standard PRO uses five stages of water treatment to provide a comprehensive domestic drinking water filtration process.
Stage 1 – 5 Micron Sediment Filtration
A polypropylene sediment filter captures suspended particles such as sand, rust, silt and other visible impurities. This initial filtration stage helps protect the downstream carbon filters and reverse osmosis membrane.
Stage 2 – Granular Activated Carbon Filtration
The granular activated carbon filter, made using coconut shell carbon, reduces chlorine and certain organic compounds that can affect water quality, taste and odour. It also helps protect the reverse osmosis membrane from chlorine exposure.
Stage 3 – 1 Micron Sediment Filtration
A finer polypropylene sediment filter removes smaller suspended particles before water reaches the reverse osmosis membrane.
Stage 4 – Reverse Osmosis Membrane
The 50 GPD reverse osmosis membrane is the main purification stage. It separates water into two streams: purified water, known as permeate, and a concentrate stream containing rejected dissolved substances that is discharged to drain.
Reverse osmosis is particularly effective at reducing dissolved salts and many other dissolved impurities. Actual performance depends on the incoming water quality, operating pressure, temperature and condition of the membrane.
Stage 5 – Mineralisation
After reverse osmosis, water passes through the mineralisation cartridge. This adds minerals back into the purified water, helping to improve its taste and provide a more balanced drinking-water profile.
Designed for everyday drinking water at home
The Ecosoft Standard PRO is designed as a point-of-use water purification system, supplying treated drinking water through its own dedicated kitchen tap.
The integrated pressure storage tank holds purified water so it is available on demand, rather than requiring the membrane to produce water at the full drinking-tap flow rate.
The system operates without electricity, making it a straightforward solution for homes with adequate incoming water pressure.
Key features and benefits
Five-stage filtration: Combines sediment, activated carbon, reverse osmosis and mineralisation technologies.
50 GPD membrane: Nominal production capacity of approximately 190 litres per day under rated conditions.
Mineralisation stage: Adds minerals back into the purified water to help improve taste.
Dedicated drinking water tap: Supplies treated water separately from the standard kitchen tap.
Integrated storage tank: 12-litre total tank capacity, with up to 7 litres of usable water.
No electricity required: The standard model operates using mains water pressure without a booster pump.
Under-sink installation: Designed to fit beneath a domestic kitchen sink.
Replaceable cartridges: Routine maintenance can be carried out by replacing the appropriate filter elements.
Technical specifications
Specification
Detail
Manufacturer
Ecosoft
Product range
Standard PRO
Model code
MO550MECOSTD
System type
Domestic reverse osmosis filter
Installation
Under-sink
Number of filtration stages
5
Membrane capacity
50 GPD
Nominal production capacity
190 litres per day
Approximate production rate
7.9 litres per hour
Required inlet pressure
3–6 bar
Storage tank total capacity
12 litres
Storage tank usable capacity
Up to 7 litres
Water connections
1/2 inch and 3/8 inch
Electrical supply
Not required
Mineralisation
Included
System dimensions (H × W × D)
414 × 422 × 135 mm
Net weight
Approximately 8.08 kg
Actual water production depends on incoming water pressure, temperature, feed-water quality and membrane condition. The 50 GPD rating is a nominal membrane capacity, not a guarantee of daily household output.
What is included?
The Ecosoft Standard PRO system is supplied with:
Filter housing and mounting assembly
Set of pre-filtration cartridges
50 GPD reverse osmosis membrane
Mineralisation cartridge
Dedicated chrome drinking water tap
Pressure storage tank (12 litres total capacity, up to 7 litres usable)
Tank valve
Feed water adapter and feed valve
Drain saddle connection
Set of coloured connection tubing
Service wrench
Installation and user manual
Installation requirements
The Ecosoft Standard PRO is designed for connection to a cold mains water supply.
The standard non-pumped version requires an incoming water pressure of 3–6 bar. If your household water pressure is below this range, a booster-pump model may be more appropriate.
The system also requires a suitable drain connection for the concentrate water produced during reverse osmosis filtration, as well as sufficient space beneath the sink for the filter assembly and storage tank.
Installation should follow the manufacturer's instructions. Check all connections for leaks after installation and monitor the system regularly during its initial operation.
Filter replacement and maintenance
Regular cartridge replacement is essential for maintaining filtration performance and protecting the reverse osmosis membrane.
Ecosoft recommends the following general replacement intervals for this system:
Component
Recommended replacement interval
Pre-filter cartridges
Every 3 months
Reverse osmosis membrane
Approximately every 12 months
Mineralisation cartridge
Approximately every 6 months
These intervals are guidelines. Actual replacement frequency depends on incoming water quality, daily water consumption and operating conditions.
The purified water should also be tested periodically, including monitoring its total dissolved solids (TDS), to check that the reverse osmosis membrane continues to perform satisfactorily.
Is the Ecosoft Standard PRO right for your home?
The Ecosoft Standard PRO is a good choice for households looking for a traditional under-sink reverse osmosis water filter with an integrated mineralisation stage.
It is particularly suitable if you want:
A dedicated supply of purified drinking water.
A multi-stage filtration system for domestic mains water.
Reverse osmosis filtration to reduce dissolved impurities.
Mineralisation to improve the taste of treated water.
A storage tank to provide water on demand.
A system that does not require an electrical connection or booster pump.
If your incoming water pressure is consistently below 3 bar, consider a pumped reverse osmosis model instead.
Why choose Ecosoft?
Ecosoft specialises in water treatment and filtration equipment for domestic and commercial applications. The Standard PRO range provides a practical approach to household drinking water purification, combining established reverse osmosis technology with replaceable filtration cartridges and a final mineralisation stage.
Shop the Ecosoft Standard PRO 50 GPD Reverse Osmosis System at GroAqua for convenient, multi-stage drinking water filtration at home.
Ecosoft cartridge set for the Standard 3-stage filter ensures up to 3,000 liters of spring-quality drinking water.* It is designed to effectively purify hard tap water, removing high levels of iron and harmful organic impurities.
*Performance may vary depending on the quality of the source water.
The Ecosoft CROSS Solo is a compact, direct-flow reverse osmosis water filtration system designed to provide purified drinking water without the need for a traditional storage tank. Its space-saving design makes it particularly suitable for smaller kitchens, apartments, studios and under-sink installations where cupboard space is limited.
Using a high-capacity 500 GPD reverse osmosis membrane, CROSS Solo delivers a rated flow capacity of up to 1.3 litres per minute (78 litres per hour). Water is purified on demand and delivered directly to the dedicated drinking water tap, eliminating the need for a bulky pressurised storage tank.
The system combines reverse osmosis membrane filtration and carbon post-filtration in one convenient replacement cartridge. Its integrated pump supports operation across the specified inlet pressure range, while automatic membrane flushing and electronic status indicators help simplify everyday operation and maintenance.
Key Features and Benefits
Tankless direct-flow design: Produces purified water on demand without a conventional storage tank.
500 GPD reverse osmosis membrane: High-capacity membrane rated for up to 78 litres per hour under specified conditions.
Fast water delivery: Rated flow of 1.3 L/min, with a 200 ml glass filled in approximately 10 seconds.
Compact installation: Measures just 300 × 140 × 200 mm, making it suitable for kitchens with restricted under-sink space.
Integrated booster pump: Supports operation with an inlet pressure of 1–4 bar.
2-in-1 replacement cartridge: Combines the RO membrane and carbon post-filter in one cartridge.
Automatic membrane flushing: Helps maintain system performance during operation.
Electronic status indicators: Provide information about system operation and filter condition.
Leak detection provision: A leakage detector is available for the system; confirm the supplied configuration before installation.
Water-saving operation: Rated recovery of up to 50%, depending on operating conditions.
How the CROSS Solo Filtration System Works
CROSS Solo uses two filtration stages incorporated into one replaceable cartridge.
Stage 1 – Reverse Osmosis Membrane (500 GPD)
The semipermeable reverse osmosis membrane reduces dissolved substances and a broad range of contaminants in the incoming water. It is the principal purification stage of the system and is responsible for reducing dissolved salts and other impurities.
Stage 2 – Activated Carbon Post-Filtration
The carbon post-filter helps improve the taste and odour of the purified water. It uses coconut-based activated carbon as the final filtration stage.
Both stages are integrated into the same CSVPDRO500 replacement cartridge, allowing the membrane and carbon filter to be replaced together.
Tankless Water Purification on Demand
Unlike conventional domestic reverse osmosis systems that store purified water in a pressure tank, CROSS Solo produces water directly when the dedicated drinking water tap is opened.
Its rated output is:
Flow capacity: 1.3 L/min
Hourly capacity: 78 L/h
Membrane rating: 500 GPD
Approximate 200 ml glass filling time: 10 seconds
Water recovery rate: up to 50%
Actual production depends on inlet pressure, water temperature, incoming water quality and the condition of the replacement cartridge.
Compact Under-Sink Installation
With dimensions of only 300 × 140 × 200 mm, CROSS Solo is designed for installations where a conventional RO system and storage tank would occupy too much cupboard space.
The system requires:
A cold-water supply connection.
A connection to the household drain.
A dedicated purified-water tap.
An electrical supply.
Suitable inlet pressure and a pressure-reducing arrangement.
The unit is designed for cold tap water only.
Water Quality and Operating Requirements
For reliable operation, incoming water should meet the manufacturer's specified requirements.
Parameter
Manufacturer specification
Inlet pressure
1–4 bar
Optimal operating pressure
3.5 bar
Feed water temperature
+5 to +30°C
Feed water pH
6.5–8.5
Maximum feed water TDS
1,000 mg/L
Maximum hardness
300 mg/L as CaCO₃
Maximum turbidity
3.5 NTU
Free chlorine
Maximum 0.01 mg/L
Maximum iron
0.3 mg/L
Maximum manganese
0.1 mg/L
Electrical supply
230 V, 50 Hz
Water connections
1/2" and 3/8"
A pressure reducer must be installed before the system to protect it from excessive pressure and pressure surges.
If the incoming water does not meet the manufacturer's quality requirements, additional pre-treatment may be necessary. Water from private wells should be tested before selecting and installing the system.
Purified Water Characteristics
Under the manufacturer's stated test conditions, the expected purified-water characteristics include:
Parameter
Indicative value
TDS
5–15 mg/L
pH
5.5–6.5
Calcium
Less than 2 mg/L
Magnesium
Less than 1 mg/L
Sodium + Potassium
Less than 5 mg/L
These values are indicative rather than guaranteed. Actual results depend on feed-water composition, pressure, temperature and operating conditions.
Important: CROSS Solo does not include a mineralisation cartridge. Its reverse osmosis process reduces dissolved minerals, so it is a different proposition from Ecosoft's mineralising PURE Balance systems.
Simple Cartridge Replacement
CROSS Solo uses one combined replacement cartridge:
Ecosoft CSVPDRO500 – 2-in-1 RO membrane and carbon post-filter
The manufacturer recommends replacing the cartridge every 12 months, or sooner if incoming water quality or usage conditions require it.
Signs that replacement may be necessary include:
Reduced purified-water flow.
Changes in water taste or odour.
Increased TDS readings.
Reduced filtration performance.
The cartridge uses a quick replacement mechanism. After installation, the system must be restarted and flushed according to the manufacturer's instructions before normal use.
Technical Specifications
Specification
Value
Brand
Ecosoft
Model
CROSS Solo
System type
Direct-flow reverse osmosis
Membrane capacity
500 GPD
Rated flow capacity
78 L/h
Rated flow rate
1.3 L/min
Filtration stages
2
Replacement cartridge
CSVPDRO500
Number of cartridges
1 combined cartridge
Storage tank
None
Mineralisation
No
Recovery rate
Up to 50%
Inlet pressure
1–4 bar
Electrical supply
230 V, 50 Hz
Water connections
1/2" and 3/8"
Dimensions (H × W × D)
300 × 140 × 200 mm
System weight
Approximately 4.3 kg
Recommended cartridge replacement
Every 12 months
What's Included
The standard system configuration should be checked against the supplied manufacturer's pack before listing individual accessories as included. The installation documentation describes the system, connection components, purified-water tap, drain connection and power supply arrangements.
Is the Ecosoft CROSS Solo Right for You?
Choose CROSS Solo if you want a compact, tankless reverse osmosis system that delivers purified water directly to a dedicated tap and avoids the need for a conventional storage tank.
It is particularly suitable for:
Small kitchens and apartments.
Under-sink installations with limited cupboard space.
Customers who prefer direct-flow water purification.
Households looking for a compact alternative to traditional tank-based RO systems.
If you prefer purified water with added calcium and magnesium, consider an Ecosoft PURE Balance reverse osmosis system with mineralisation instead.
Choose Ecosoft CROSS Solo for compact, on-demand reverse osmosis water purification without the storage tank.
Enjoy purified, great-tasting drinking water at home with the Ecosoft PURE Balance Reverse Osmosis System. Designed for installation beneath the kitchen sink, this advanced domestic water filtration system combines six stages of treatment with specialist mineralisation technology to produce purified water enriched with calcium and magnesium.
The PURE Balance uses a 75 GPD reverse osmosis membrane, capable of producing up to approximately 280 litres of purified water per day under rated conditions. Its AquaGreen technology is designed to improve water efficiency, with a manufacturer-stated recovery rate of up to 50%.
Unlike a conventional reverse osmosis system that produces very low-mineral water, the PURE Balance includes a dedicated Balance mineralisation cartridge. This adds calcium and magnesium back into the purified water, helping to create a more balanced mineral profile and improve drinking-water taste.
With a dedicated drinking-water tap and an integrated storage tank, the Ecosoft PURE Balance provides a convenient domestic drinking-water solution.
Six-stage reverse osmosis filtration
The Ecosoft PURE Balance combines sediment filtration, activated carbon, membrane purification and mineralisation in a six-stage treatment process.
Stage 1 – Sediment Filtration
The dual-gradient-density sediment cartridge captures suspended particles such as sand, rust, silt and other physical impurities.
This initial filtration stage helps protect the subsequent cartridges and reverse osmosis membrane from particulate contamination.
Stage 2 – Activated Carbon Filtration
The granular activated carbon cartridge uses coconut shell carbon to reduce chlorine and certain organic compounds that can affect water taste and odour.
Removing chlorine before the membrane stage also helps protect the reverse osmosis membrane from chlorine-related degradation.
Stage 3 – AquaGreen Water-Efficiency Technology
The AquaGreen cartridge is designed to help control scale-forming substances and improve the efficiency of the reverse osmosis process.
This technology supports the system's stated water recovery rate of up to 50%, helping reduce the proportion of incoming water discharged as concentrate compared with less efficient configurations.
Stage 4 – Reverse Osmosis Membrane
The 75 GPD reverse osmosis membrane is the main purification stage.
It separates incoming water into two streams:
Purified water, known as permeate, which passes through the membrane.
Concentrated reject water, which carries away a proportion of the dissolved substances retained by the membrane.
Reverse osmosis is effective at reducing many dissolved salts and other contaminants. Actual removal performance depends on the substance being measured, incoming water quality, temperature, pressure and membrane condition.
Stage 5 – Balance Mineralisation
After reverse osmosis, water passes through the dedicated Balance mineralisation cartridge.
This stage adds calcium and magnesium to the purified water, helping restore part of its mineral content and improve its taste.
Under the manufacturer's stated test conditions, the expected mineralised water profile is:
Total mineral content: 60–80 mg/L
Calcium: 10–15 mg/L
Magnesium: 4–6 mg/L
pH: 7–8.5
These are indicative manufacturer values, not guaranteed results for every installation. Actual mineral content varies with incoming water temperature, water composition and usage.
Stage 6 – Carbon Post-Filtration
The final coconut shell activated carbon post-filter provides a final taste and odour polishing stage before the water reaches the dedicated drinking-water tap.
AquaGreen technology – improved water recovery
One of the key features of the Ecosoft PURE Balance is its AquaGreen technology.
Traditional reverse osmosis systems discharge a proportion of the incoming water to drain as part of the membrane separation process. AquaGreen technology is designed to improve water efficiency, with a stated recovery rate of up to 50%.
A 50% recovery rate means that, under the relevant operating conditions, approximately half of the incoming water can be recovered as treated water, with the remainder discharged as concentrate.
Actual recovery depends on feed-water composition, pressure, temperature and system operating conditions.
Mineralised drinking water with calcium and magnesium
A key difference between the PURE Balance and standard reverse osmosis systems is its dedicated mineralisation stage.
Reverse osmosis removes many dissolved substances, including naturally occurring minerals. The Balance cartridge adds selected minerals back into the treated water, particularly calcium and magnesium.
The manufacturer's indicative water-quality values are:
Parameter
Expected value
pH
7–8.5
Total mineral content
60–80 mg/L
Calcium
10–15 mg/L
Magnesium
4–6 mg/L
Sodium + potassium
<5 mg/L
Hydrocarbonates
30–60 mg/L
Chlorides
<5 mg/L
These figures are based on specified test conditions, including an inlet water temperature of 20°C. Mineral content may vary with seasonal temperature changes and water consumption. The first glass drawn after a period of standing may also have a higher mineral concentration.
Key features and benefits
Six-stage filtration: Combines sediment, carbon, AquaGreen, reverse osmosis, mineralisation and carbon post-filtration.
75 GPD membrane: Nominal production capacity of approximately 280 litres per day.
AquaGreen technology: Manufacturer-stated water recovery rate of up to 50%.
Calcium and magnesium mineralisation: Adds selected minerals back into purified water.
Improved drinking-water taste: Mineralisation and final carbon filtration help create a pleasant drinking-water profile.
Integrated storage tank: 12 litres total tank capacity, with up to 7 litres usable capacity.
Dedicated drinking-water tap: Supplies purified water separately from the normal kitchen tap.
No electricity required: The standard version operates using mains water pressure without a booster pump.
Flexible installation: Designed to support horizontal or vertical installation, subject to installation requirements.
Replaceable cartridges: Routine servicing can be carried out using compatible Ecosoft replacement filters.
Technical specifications
Specification
Detail
Manufacturer
Ecosoft
Product range
PURE Balance
Model code
MO675MPUREBALECO
System type
Domestic reverse osmosis water filter
Installation
Under-sink
Filtration stages
6
Membrane capacity
75 GPD
Nominal production capacity
280 litres per day
AquaGreen recovery rate
Up to 50%
Required inlet pressure
3–6 bar
Storage tank total capacity
12 litres
Storage tank usable capacity
Up to 7 litres
Connections
1/2 inch and 3/8 inch
Electrical supply
Not required
Mineralisation
Calcium and magnesium
Dimensions (H × W × D)
312 × 430 × 195 mm
Net weight
Approximately 10 kg
The 75 GPD rating is a nominal membrane capacity, not a guarantee of daily household output. Actual production depends on feed-water pressure, temperature, composition and membrane condition.
What is included?
The Ecosoft PURE Balance system is supplied with:
Filter housing and pre-filtration cartridges
75 GPD reverse osmosis membrane
AquaGreen filtration cartridge
Balance mineralisation cartridge
Coconut shell carbon post-filter
Dedicated Modern ball-valve drinking-water tap
Pressure storage tank, 12 litres total capacity
Tank valve
Feed-water adapter and feed valve
Drain saddle connection
Four-colour connection tubing
Service wrenches
Installation and user manual
Installation requirements
The Ecosoft PURE Balance is designed for connection to a suitable cold mains water supply.
The standard non-pumped version requires an incoming water pressure of 3–6 bar.
Installation also requires:
A suitable cold-water supply connection.
A drain connection for concentrate water.
Space beneath the sink for the filtration assembly and storage tank.
A suitable location for the dedicated drinking-water tap.
The system is supplied with the necessary connection components listed above. Installation should follow the manufacturer's instructions, and all connections should be checked for leaks before normal use.
If your household water pressure is below the required range, consider the Ecosoft PURE Balance version with a booster pump instead.
Filter replacement and maintenance
Regular replacement of the filtration cartridges is essential for maintaining water quality and protecting the reverse osmosis membrane.
GroAqua offers compatible PURE Balance replacement filter options:
PURE Balance set of 5 replacement filters: For routine filter maintenance without replacing the membrane.
PURE Balance set of 6 replacement filters with membrane: A more comprehensive replacement option that includes the membrane.
Replacement intervals depend on incoming water quality, household consumption and operating conditions. Follow the manufacturer's maintenance recommendations and replace cartridges when required.
Monitoring the treated water using a suitable TDS meter can also help assess reverse osmosis membrane performance. TDS readings are useful for monitoring changes in dissolved solids, although they do not identify individual contaminants or prove that water is microbiologically safe.
Is the Ecosoft PURE Balance right for your home?
The PURE Balance is particularly suitable for households looking for a domestic reverse osmosis water filter with a more developed mineralisation stage.
It is a good option if you want:
A dedicated supply of purified drinking water.
Six-stage under-sink reverse osmosis filtration.
A higher-capacity 75 GPD membrane.
Reduced water waste through AquaGreen technology.
Calcium and magnesium added back into purified water.
A storage tank for convenient access to drinking water.
A system that does not require electricity or a booster pump, provided mains pressure is sufficient.
For households with lower incoming water pressure, the pumped PURE Balance model may be a better choice.
Why choose Ecosoft PURE Balance?
The Ecosoft PURE Balance combines reverse osmosis purification with specialist mineralisation and water-efficiency technology.
Its 75 GPD membrane, AquaGreen cartridge and Balance mineralisation stage make it a strong option for households looking for more than a basic under-sink water filter.
Available from GroAqua – domestic reverse osmosis systems, drinking-water filtration and water treatment equipment.
Enjoy purified, great-tasting drinking water at home with the Ecosoft PURE Balance Reverse Osmosis System with Pump. Designed for under-sink installation, this advanced domestic water filtration system combines six stages of treatment, an integrated booster pump and specialist mineralisation technology to deliver purified water enriched with calcium and magnesium.
The PURE Balance is particularly suitable for homes where incoming mains water pressure is too low for a conventional non-pumped reverse osmosis system. Its integrated booster pump helps provide the pressure required for effective membrane operation, while the metal mounting frame keeps the filtration components securely supported.
At its heart is a 75 GPD reverse osmosis membrane with a nominal production capacity of approximately 280 litres per day under rated conditions. Ecosoft's AquaGreen technology is designed to improve water efficiency, with a manufacturer-stated recovery rate of up to 50%.
After reverse osmosis filtration, the Balance mineralisation cartridge adds calcium and magnesium back into the purified water, helping create a balanced mineral profile and pleasant drinking-water taste.
With a dedicated drinking-water tap and an integrated storage tank, the Ecosoft PURE Balance provides a convenient household drinking-water solution.
Designed for lower water pressure
One of the main advantages of this PURE Balance model is its integrated booster pump.
Conventional non-pumped reverse osmosis systems rely entirely on incoming mains pressure to drive water through the membrane. Where pressure is insufficient, water production can be slow and filtration performance may be affected.
The pumped PURE Balance is designed for lower-pressure water supplies, with a specified inlet pressure range of 2–5 bar.
The booster pump helps maintain the operating pressure needed for the reverse osmosis membrane, making this model a useful choice for homes where a standard non-pumped system may not be suitable.
The pump is mounted on a sturdy metal frame alongside the filtration assembly.
Six-stage reverse osmosis filtration
The Ecosoft PURE Balance uses six stages of water treatment, combining sediment filtration, activated carbon, AquaGreen technology, reverse osmosis, mineralisation and final carbon filtration.
Stage 1 – Sediment Filtration
The dual-gradient-density sediment cartridge captures suspended particles such as sand, rust, silt and other physical impurities.
This initial filtration stage helps protect the downstream cartridges and reverse osmosis membrane from particulate contamination.
Stage 2 – Activated Carbon Filtration
The granular activated carbon cartridge uses coconut shell carbon to reduce chlorine and certain organic compounds that can affect water taste and odour.
Removing chlorine before the membrane stage also helps protect the reverse osmosis membrane from chlorine-related degradation.
Stage 3 – AquaGreen Technology
The AquaGreen cartridge is designed to help control scale-forming substances and improve the efficiency of the reverse osmosis process.
This technology supports the system's stated water recovery rate of up to 50%, helping reduce the proportion of incoming water discharged as concentrate compared with less efficient configurations.
Stage 4 – 75 GPD Reverse Osmosis Membrane
The reverse osmosis membrane is the main purification stage.
It separates incoming water into two streams:
Purified water, known as permeate, which passes through the membrane.
Concentrate water, which carries away a proportion of the dissolved substances retained by the membrane.
Reverse osmosis is effective at reducing many dissolved salts and other contaminants. Actual removal performance depends on the substance being measured, incoming water quality, pressure, temperature and membrane condition.
The integrated booster pump helps provide the pressure needed for membrane operation, particularly in lower-pressure installations.
Stage 5 – Balance Mineralisation
After reverse osmosis, water passes through the dedicated Balance mineralisation cartridge.
This stage adds calcium and magnesium back into the purified water, helping restore part of its mineral content and improve drinking-water taste.
Under the manufacturer's stated test conditions, the expected mineralised water profile is:
Total mineral content: 60–80 mg/L
Calcium: 10–15 mg/L
Magnesium: 4–6 mg/L
pH: 7–8.5
These values are indicative manufacturer figures rather than guaranteed results for every installation. Actual mineral content varies with incoming water temperature, water composition and usage.
Stage 6 – Carbon Post-Filtration
The final coconut shell activated carbon post-filter provides a final taste and odour polishing stage before water reaches the dedicated drinking-water tap.
AquaGreen technology – improved water recovery
The PURE Balance incorporates Ecosoft's AquaGreen technology, designed to improve water efficiency during reverse osmosis filtration.
Reverse osmosis systems discharge a proportion of incoming water to drain as part of the membrane separation process. AquaGreen technology is designed to achieve a manufacturer-stated recovery rate of up to 50%.
A 50% recovery rate means that, under the relevant operating conditions, approximately half of the incoming water can be recovered as treated water, with the remainder discharged as concentrate.
Actual recovery depends on feed-water composition, operating pressure, temperature and system conditions.
Mineralised drinking water with calcium and magnesium
A key feature of the PURE Balance is its dedicated mineralisation stage.
Reverse osmosis removes many dissolved substances, including naturally occurring minerals. The Balance cartridge adds selected minerals back into the purified water, particularly calcium and magnesium.
The manufacturer's indicative mineralised-water profile is:
Parameter
Expected value
pH
7–8.5
Total mineral content
60–80 mg/L
Calcium
10–15 mg/L
Magnesium
4–6 mg/L
Sodium + potassium
<5 mg/L
Hydrocarbonates
30–60 mg/L
Chlorides
<5 mg/L
These values are determined under specified test conditions, including an inlet water temperature of 20°C. Mineral content may vary with seasonal temperature changes and water consumption.
Key features and benefits
Integrated booster pump: Designed to support reverse osmosis filtration in lower-pressure water supplies.
Metal mounting frame: Provides a stable platform for the pump and filtration components.
Six-stage filtration: Combines sediment, carbon, AquaGreen, reverse osmosis, mineralisation and final carbon filtration.
75 GPD membrane: Nominal production capacity of approximately 280 litres per day.
AquaGreen technology: Manufacturer-stated water recovery rate of up to 50%.
Calcium and magnesium mineralisation: Adds selected minerals back into purified water.
Improved drinking-water taste: Mineralisation and final carbon filtration help improve the taste and odour of treated water.
Integrated storage tank: 12 litres total capacity, with up to 7 litres usable.
Dedicated drinking-water tap: Supplies purified water separately from the standard kitchen tap.
Replaceable cartridges: Routine servicing can be carried out using compatible Ecosoft replacement filters.
Technical specifications
Specification
Detail
Manufacturer
Ecosoft
Product range
PURE Balance
Model code
MO675MBALPSECO
System type
Domestic reverse osmosis water filter with booster pump
Installation
Under-sink
Filtration stages
6
Membrane capacity
75 GPD
Nominal production capacity
280 litres per day
AquaGreen recovery rate
Up to 50%
Required inlet pressure
2–5 bar
Pump configuration
Integrated booster pump on metal frame
Storage tank total capacity
12 litres
Storage tank usable capacity
Up to 7 litres
Connections
1/2 inch and 3/8 inch
Mineralisation
Calcium and magnesium
Dimensions (H × W × D)
485 × 410 × 195 mm
Net weight
Approximately 10.48 kg
The 75 GPD rating is a nominal membrane capacity, not a guarantee of daily household output. Actual production depends on feed-water pressure, temperature, composition and membrane condition.
What is included?
The Ecosoft PURE Balance pumped system is supplied with:
Filter housing with integrated booster pump on metal mounting frame
Pre-filtration cartridges
75 GPD reverse osmosis membrane
AquaGreen cartridge
Balance mineralisation cartridge
Coconut shell carbon post-filter
Dedicated Modern ball-valve drinking-water tap
Pressure storage tank, 12 litres total capacity
Tank valve
Feed-water adapter and feed valve
Drain saddle connection
Four-colour connection tubing
Service wrenches
Installation and user manual
Installation requirements
The PURE Balance pumped system is designed for connection to a suitable cold mains water supply.
Its specified inlet pressure range is 2–5 bar, making it suitable for lower-pressure installations than the standard non-pumped PURE Balance.
Installation also requires:
A suitable cold-water supply connection.
A drain connection for concentrate water.
Sufficient under-sink space for the filter assembly, pump and storage tank.
A suitable position for the dedicated drinking-water tap.
An appropriate electrical supply for the booster pump, following the manufacturer's installation instructions.
The pump is an electrical component, so this model differs from the standard PURE Balance, which operates without an electrical connection.
Installation should follow the manufacturer's instructions. Check all water connections for leaks and verify correct pump operation before normal use.
Filter replacement and maintenance
Regular cartridge replacement is essential for maintaining filtration performance and protecting the reverse osmosis membrane.
Compatible replacement options include:
PURE Balance set of 5 replacement filters: For routine filter maintenance.
PURE Balance set of 6 replacement filters with membrane: A more comprehensive replacement option.
75 GPD replacement membrane: For membrane replacement when required.
The recommended replacement frequency depends on incoming water quality, household consumption and operating conditions. Follow the manufacturer's maintenance recommendations.
Monitoring treated water with a suitable TDS meter can also help assess membrane performance. TDS readings are useful for monitoring changes in dissolved solids, but they do not identify individual contaminants or confirm microbiological safety.
Is the pumped Ecosoft PURE Balance right for your home?
The pumped PURE Balance is particularly suitable for households that want a domestic reverse osmosis system but do not have sufficient mains pressure for a conventional non-pumped unit.
It is a good choice if you want:
Reverse osmosis drinking-water filtration in a lower-pressure property.
A booster pump to support membrane operation.
Six-stage filtration with mineralisation.
Calcium and magnesium added back into purified water.
A 75 GPD membrane.
AquaGreen water-efficiency technology.
An integrated storage tank for convenient access to drinking water.
If your household has consistently adequate mains pressure, the standard non-pumped PURE Balance may be a simpler alternative.
Why choose Ecosoft PURE Balance with Pump?
The Ecosoft PURE Balance combines domestic reverse osmosis purification, booster-pump technology, AquaGreen water efficiency and calcium-and-magnesium mineralisation.
It is a practical solution for homeowners who want the benefits of reverse osmosis drinking-water filtration but need additional pressure support for reliable system operation.
Available from GroAqua – domestic reverse osmosis systems, drinking-water filtration and water treatment equipment.
Keep your Ecosoft PURE Balance reverse osmosis water filtration system performing at its best with this genuine Ecosoft replacement filter set.
Designed specifically for compatible Ecosoft PURE Balance domestic reverse osmosis systems, this five-cartridge replacement pack provides the essential filters required for routine system maintenance.
Combining sediment filtration, granular activated carbon, innovative AquaGreen technology, mineralisation and coconut shell carbon post-filtration, the PURE Balance replacement filter set helps maintain filtration performance while delivering fresh-tasting, mineral-balanced drinking water.
The convenient five-filter pack is designed for approximately six months of regular use, depending on incoming water quality and household consumption.
Please note: This replacement filter set DOES NOT include the reverse osmosis membrane. It is ideal for routine filter maintenance when your existing RO membrane remains suitable for continued use.
What's Included? – 5 Ecosoft Replacement Filter Cartridges
This Ecosoft PURE Balance replacement set contains five specialist filtration cartridges.
1. 5 Micron Sediment Filter
The first stage of filtration uses polypropylene sediment filter media to help remove suspended particles such as sand, rust, silt and other larger impurities from incoming water.
This helps protect the subsequent filtration cartridges and reverse osmosis membrane.
2. Granular Activated Carbon (GAC) Filter
Uses coconut shell-based granular activated carbon to help reduce chlorine, chlorination by-products and organic compounds that can affect the taste and odour of drinking water.
3. AquaGreen Carbon Block Filter
Ecosoft's AquaGreen technology provides additional carbon filtration and is designed to help protect the reverse osmosis membrane against scaling.
This technology also supports more efficient water recovery within compatible PURE Balance systems.
4. Balance Mineralisation Filter
The Balance cartridge enriches purified water with calcium and magnesium, helping create naturally balanced drinking water with a fresh taste.
Under the manufacturer's specified operating conditions, the PURE Balance system produces water with approximately:
Calcium: 10–15 mg/L.
Magnesium: 4–6 mg/L.
Total mineral content: 60–80 mg/L.
Actual mineral concentrations depend on operating conditions and incoming water quality.
5. Coconut Shell Carbon Post-Filter
The final filtration stage uses coconut shell activated carbon to help improve the taste and odour of purified water before it reaches your drinking water tap.
Key Benefits of Ecosoft PURE Balance Replacement Filters
Genuine Ecosoft PURE Balance replacement filter set.
Five specialist replacement cartridges included.
Designed for compatible Ecosoft PURE Balance RO systems.
5 micron sediment filtration.
Coconut shell granular activated carbon filtration.
AquaGreen membrane protection technology.
Balance mineralisation with calcium and magnesium.
Coconut shell carbon post-filter.
Helps maintain reverse osmosis filtration performance.
Convenient approximately six-month filter replacement pack.
Compatible Reverse Osmosis Systems
This replacement filter set is specifically designed for Ecosoft PURE Balance domestic reverse osmosis systems.
It is suitable for compatible PURE Balance configurations using the corresponding five-cartridge replacement filter arrangement.
Please check your existing system model and cartridge configuration before ordering.
Important: This kit does not include the reverse osmosis membrane. If your membrane also requires replacement, please see our Ecosoft PURE Balance Annual Replacement Filter Set with Membrane.
When Should You Replace Ecosoft PURE Balance Filters?
Ecosoft recommends replacing the PURE Balance five-filter set approximately every six months.
Regular replacement helps maintain filtration performance, protects the RO membrane and ensures the mineralisation and post-filtration stages continue working effectively.
Actual filter life depends on incoming water quality, household consumption and operating conditions.
The reverse osmosis membrane has a separate replacement schedule and should be replaced according to the manufacturer's maintenance recommendations.
Why Choose Ecosoft PURE Balance Replacement Filters?
The PURE Balance system combines conventional reverse osmosis filtration with Ecosoft's AquaGreen and Balance technologies.
Unlike standard replacement filter packs, this five-cartridge set includes a dedicated mineralisation stage designed to enrich purified water with calcium and magnesium.
Using genuine Ecosoft replacement cartridges helps maintain the intended filtration configuration and performance of your PURE Balance system.
Buy Ecosoft Replacement Filters from GroAqua
Keep your Ecosoft PURE Balance reverse osmosis system properly maintained with genuine replacement filter cartridges from GroAqua.
Order your Ecosoft PURE Balance Set of 5 Replacement Filters today and maintain fresh, great-tasting, mineral-balanced drinking water in your home.
Keep your Ecosoft PURE Balance reverse osmosis water filtration system performing at its best with this complete six-piece annual replacement filter set.
The genuine Ecosoft PURE Balance CHV6PUREBAL replacement kit contains all six filtration components required for a complete annual filter replacement, including a new 75 GPD reverse osmosis membrane.
Designed for compatible Ecosoft PURE Balance domestic reverse osmosis systems, this comprehensive replacement set combines advanced sediment filtration, activated carbon filtration, AquaGreen water-saving technology, reverse osmosis membrane filtration and Balance mineralisation.
The result is a convenient all-in-one maintenance solution that helps maintain filtration performance while delivering fresh-tasting drinking water enriched with calcium and magnesium.
Product code: CHV6PUREBAL
What's Included? – Complete Set of 6 Replacement Filters
This genuine Ecosoft PURE Balance annual service kit includes:
1. Sediment Pre-Filter
The first filtration stage helps remove suspended particles such as sand, rust, silt and other physical impurities from incoming water.
This protects the subsequent filtration stages and helps maintain the performance of your reverse osmosis system.
2. Granular Activated Carbon (GAC) Filter
Uses coconut shell-based granular activated carbon to help reduce chlorine, chlorination by-products and organic compounds that can affect the taste and odour of drinking water.
3. AquaGreen Carbon Block Filter
Ecosoft AquaGreen technology provides additional carbon filtration and is designed to help reduce scaling and improve water recovery efficiency in compatible PURE Balance systems.
This helps protect the RO membrane and supports more efficient water use.
4. 75 GPD Reverse Osmosis Membrane
The replacement reverse osmosis membrane is the central filtration component of your system.
Using semi-permeable membrane technology, it helps reduce dissolved salts and a wide range of unwanted substances from incoming water.
This kit includes a 75 GPD (approximately 280 litres per day) RO membrane, allowing you to replace the main filtration element as part of your annual system maintenance.
5. Balance Mineralisation Cartridge
The Ecosoft Balance cartridge enriches purified water with calcium and magnesium, helping create mineral-balanced drinking water with a pleasant, fresh taste.
Under the manufacturer's specified operating conditions, the PURE Balance system produces water with approximately:
Calcium: 10–15 mg/L.
Magnesium: 4–6 mg/L.
Total mineral content: 60–80 mg/L.
Actual mineral concentrations depend on incoming water quality and system operating conditions.
6. Coconut Shell Activated Carbon Post-Filter
The final filtration stage uses coconut shell activated carbon to help improve the taste and odour of purified water before it reaches your drinking water tap.
Key Benefits of the Ecosoft PURE Balance Annual Replacement Kit
Genuine Ecosoft replacement filter set.
Complete set of six replacement filtration components.
75 GPD (280 LPD) RO membrane included.
Designed for annual reverse osmosis system maintenance.
Sediment pre-filtration.
Coconut shell granular activated carbon filtration.
AquaGreen membrane protection and water recovery technology.
Balance calcium and magnesium mineralisation.
Coconut shell activated carbon post-filter.
Helps maintain reverse osmosis filtration performance.
Convenient all-in-one annual service kit.
Compatible Ecosoft PURE Balance Systems
This replacement filter set is designed for the following Ecosoft PURE Balance reverse osmosis systems:
MO675MPUREBALECO – PURE Balance system.
MO675MBALPSECO – PURE Balance system with pump.
The CHV6PUREBAL replacement kit contains the six filtration components required for these compatible systems.
Before ordering, please check your existing system model and filter configuration to ensure compatibility.
When Should You Replace Your Ecosoft PURE Balance Filters?
Ecosoft recommends replacing the complete six-filter PURE Balance set approximately every 12 months.
Regular replacement helps maintain filtration performance, supports effective membrane operation and ensures the mineralisation and post-filtration stages continue working as intended.
Actual replacement intervals depend on incoming water quality, household consumption and operating conditions.
Always follow the manufacturer's maintenance recommendations for your particular system.
Why Choose Ecosoft PURE Balance Replacement Filters?
The Ecosoft PURE Balance system combines reverse osmosis filtration with AquaGreen and Balance mineralisation technologies.
Unlike conventional reverse osmosis systems, PURE Balance incorporates a dedicated mineralisation cartridge designed to enrich purified water with calcium and magnesium.
The AquaGreen filtration stage also supports improved water recovery, helping reduce wastewater during the purification process.
Using genuine Ecosoft replacement cartridges helps maintain the intended filtration configuration and performance of your PURE Balance system.
Buy Genuine Ecosoft Replacement Filters from GroAqua
Maintain your Ecosoft PURE Balance reverse osmosis system with this genuine six-piece annual replacement filter kit.
Complete with a new 75 GPD reverse osmosis membrane, AquaGreen technology and Balance mineralisation, the CHV6PUREBAL provides a convenient solution for complete annual system maintenance.
Order your Ecosoft PURE Balance Set of 6 Replacement Filters from GroAqua.
Keep your Ecosoft Standard 3-stage water filtration system working effectively with the Ecosoft Advanced Set of 3 Replacement Filters. Designed for the treatment of cold tap water, this replacement pack combines advanced ECOMIX filtration media with a coconut-shell carbon filter to help reduce water hardness and selected unwanted substances.
The three cartridges work together to improve the quality of incoming water and help protect the filtration system.
What’s included in the set?
The Ecosoft Standard Advanced replacement set contains three cartridges:
Stage 1 – ECOMIX D37 filterUses ECOMIX filtration media to help reduce water hardness, chlorine and selected heavy and non-ferrous metals.
Stage 2 – ECOMIX D531 filterProvides additional treatment for hardness and selected organic compounds, including phenols, petroleum products, iron and manganese.
Stage 3 – CTO coconut-shell carbon filterHelps reduce chlorination by-products and sediment, supporting improved water taste and quality.
Key benefits
Three-cartridge advanced replacement set.
ECOMIX filtration media for additional water treatment.
Helps reduce hardness and selected metals and organic compounds.
Coconut-shell carbon filtration for reducing chlorination by-products.
Designed for use with compatible Ecosoft Standard 3-stage filtration systems.
Replacing cartridges as a complete set supports consistent system maintenance.
Compatibility
Designed for the compatible Ecosoft Standard 3-stage water filter.
Please check your existing system model and cartridge specifications before ordering. This is an advanced replacement set and should not be confused with the standard PP5-GAC-PP1 three-filter pack or Ecosoft PURE Balance replacement sets.
Replacement and maintenance
Follow the maintenance schedule specified for your particular Ecosoft system. GroAqua's Ecosoft Standard 3-stage filter guidance recommends replacing its cartridges together every six months. Actual cartridge life may vary with incoming water quality and usage.
Important information
Intended for cold tap water treatment.
Contains three replacement filter cartridges.
This is a replacement cartridge set, not a complete water filtration system.
Check compatibility before installation.
Maintain your Ecosoft Standard reverse osmosis water filtration system with this set of three genuine Ecosoft replacement pre-filters. The pack contains a 5-micron sediment cartridge, a granular activated carbon (GAC) cartridge and a 1-micron sediment cartridge.
Working together, these cartridges pre-filter incoming water before it reaches the reverse osmosis membrane. They help reduce sediment, chlorine, chlorination by-products and other unwanted substances, while helping protect the membrane from particles and contaminants in the feed water.
What’s included in the set?
Stage 1 – PP5 sediment filter (5 micron)The PP5 cartridge reduces sand, silt, scale and other insoluble particles larger than 5 microns.
Stage 2 – GAC granular activated carbon filterThe GAC cartridge helps reduce chlorine, chlorination by-products, natural organic matter and petrochemicals.
Stage 3 – PP1 sediment filter (1 micron)The PP1 cartridge provides finer sediment filtration, reducing sand, silt, scale and other insoluble particles larger than 1 micron.
Key benefits
Complete set of three replacement pre-filters.
Includes PP5, GAC and PP1 cartridges.
Helps reduce sediment and suspended particles.
Activated carbon helps reduce chlorine and chlorination by-products.
Provides pre-filtration before the reverse osmosis membrane.
Helps protect the RO membrane from sediment and other particles.
Convenient set for routine filter maintenance.
Compatibility
Designed for compatible Ecosoft Standard reverse osmosis systems using the PP5–GAC–PP1 pre-filter configuration.
Please check your existing system model and cartridge configuration before ordering. Ecosoft systems can use different cartridge combinations depending on the model and production version.
Replacement schedule
For the Ecosoft Standard 3-stage filter, GroAqua recommends replacing the cartridges together every six months, regardless of the volume of water filtered. Actual service life can also be affected by incoming water quality and usage.
Important information
This pack contains three pre-filter cartridges.
The reverse osmosis membrane is not included.
A post-carbon or mineralisation filter is not included.
This is a replacement cartridge set, not a complete water filtration system.
Intended for use with compatible Ecosoft systems. Check compatibility before purchase.
Complete set of replacement replacement filter cartridges for 6 Stage Reverse Osmosis System
(Stage 1) 10 Micron Sediment Filter
(Stage 2) Activated Carbon Block Filter
(Stage 3) Activated Carbon Block
(Stage 4) Reverse Osmosis Membrane (not included)
(Stage 5) Post Carbon filter
This replacement Reverse Osmosis Filter set is suitable for all leading brands of RO System.
High-Quality Replacement Filters
Keep your 6 Stage Reverse Osmosis system running smoothly with our premium water filter set. Our filters are designed for quick and easy connection, saving you time and hassle when it comes to maintenance. Made with top-notch materials, these replacement filters ensure your drinking water is clean, fresh, and ready to enjoy.
Improved Water Purity
Experience cleaner and safer drinking water with our specially designed filter set. The 6 Stage Reverse Osmosis system removes impurities, contaminants, and unpleasant tastes from your tap water, providing you with pure and refreshing hydration. Trust our replacement filters to deliver outstanding filtration performance every time.
Easy Installation and Replacement
Our filter set is effortless to install and replace thanks to the quick connections. Simply follow the step-by-step instructions provided, and you'll have your 6 Stage Reverse Osmosis system up and running in no time. Ensure your family continues to enjoy healthy and great-tasting water by regularly replacing the filters with our convenient set.
Included Filters
(Stage 1) 10 Micron Sediment Filter
(Stage 2) Activated Carbon Block Filter
(Stage 3) Activated Carbon Block
(Stage 4) Reverse Osmosis Membrane (not included)
(Stage 5) Post Carbon filter AICRO-QC
(Stage 6) Mineral cartridge: AIMRO-QC
This replacement Reverse Osmosis Filter set is suitable for all leading brands of RO System.
High-Quality Aquafilter Set
Aquafilter is a leading brand in water filtration solutions, offering a premium filter set designed specifically for Reverse Osmosis systems. Our filter set is made with the highest quality materials to ensure optimal performance and reliability. With Aquafilter, you can trust that your drinking water will be clean, clear, and safe for you and your family.
Efficient Filtration Process
Our Aquafilter set utilizes advanced technology to efficiently remove contaminants and impurities from your water. Each filter is designed to target specific contaminants such as chlorine, lead, fluoride, and more, providing you with clean and great-tasting water every time. With our filter set, you can enjoy peace of mind knowing that your water is being filtered effectively.
Set Includes
Complete set of replacement replacement filter cartridges for 6 Stage Reverse Osmosis System
(Stage 1) 10 Micron Sediment Filter
(Stage 2) Activated Carbon Block Filter
(Stage 3) Activated Carbon Block
(Stage 4) Reverse Osmosis Membrane
(Stage 5) Post Carbon filter AICRO-QC
(Stage 6) Mineral cartridge: AIMRO-QC
This replacement Reverse Osmosis Filter set is suitable for all leading brands of RO System
Upgrade your 7 Stage Reverse Osmosis system with our Replacement Filters for Quick Connections. This filter set is designed specifically for Aquafilter systems, ensuring compatibility and optimal performance. Keep your drinking water clean and pure by regularly replacing the filters in your Reverse Osmosis unit.
High-Quality Filtration for Reverse Osmosis
Our Replacement Filters are made with high-quality materials to provide efficient filtration and long-lasting durability. The included membrane helps remove contaminants and impurities from your water, giving you peace of mind knowing that you are getting the best quality water possible. With quick connections for easy installation, maintaining your Reverse Osmosis system has never been easier.
Filters included in the set
(Stage 1) 10 Micron Sediment Filter
(Stage 2) Activated Carbon Block Filter
(Stage 3) Activated Carbon Block
(Stage 4) Reverse Osmosis Membrane
(Stage 5) Post Carbon filter AICRO-QC
(Stage 6) Mineral cartridge: AIMRO-QC
(Stage 7) Negative Ionizer (AIFIR-2000) (1/4" NPT Threaded connection)
This replacement Reverse Osmosis Filter set is suitable for all leading brands of RO System.
The SPECTRUM PURE Z1-E020 is a compact, high-performance tankless reverse osmosis system designed to provide purified drinking water directly from a dedicated kitchen tap. Combining four-stage filtration, an integrated booster pump and intelligent flushing functions, it offers a convenient alternative to traditional reverse osmosis systems with bulky storage tanks.
With a nominal production capacity of up to 3,000 litres per day (LPD) and a rated flow of approximately 2 litres per minute, the Z1-E020 is designed for residential kitchens and suitable light-commercial applications.
Its space-saving under-sink design eliminates the need for a conventional pressurised storage tank, while the twist-and-lock cartridge system makes routine filter replacement straightforward.
Key Features and Benefits
Tankless reverse osmosis: Produces purified water on demand without a conventional storage tank.
3,000 LPD nominal capacity: High-capacity filtration for residential and suitable light-commercial applications.
2 L/min rated flow: Delivers a convenient supply of purified water directly to the dedicated tap.
Four-stage filtration: Combines sediment, activated carbon, reverse osmosis and post-carbon filtration.
93% nominal salt rejection: Helps reduce dissolved salts and mineral content under specified test conditions.
65% nominal water recovery: Efficient use of incoming feed water under the stated operating conditions.
Integrated booster pump: Supports reverse osmosis operation within the specified 1–4 bar feed-pressure range.
Automatic membrane flushing: Automatic rinsing helps maintain system performance.
Filter-life monitoring: Separate indicators help show when the pre/post-filter and RO membrane cartridge need replacement.
Twist-and-lock cartridges: Convenient cartridge replacement without complicated servicing.
Compact under-sink design: Saves cupboard space by removing the need for a conventional RO storage tank.
Complete installation kit: Includes a dedicated stainless-steel drinking-water tap, fittings, tubing and power transformer.
How the SPECTRUM PURE Z1-E020 Filtration System Works
The Z1-E020 uses four filtration stages, supplied through two replaceable cartridges.
Stage 1 – Sediment Filtration
The first stage reduces suspended particles such as sand, rust, silt and other sediment from the incoming water. This helps protect the downstream filtration components.
Stage 2 – Activated Carbon Pre-Filtration
The second stage uses a carbon block to reduce residual chlorine and selected compounds that can affect water taste and odour. This stage also helps protect the reverse osmosis membrane.
Stage 3 – Reverse Osmosis Membrane
The reverse osmosis membrane is the main purification stage. Its semipermeable membrane reduces dissolved salts, minerals and other dissolved substances as water passes through it.
Stage 4 – Activated Carbon Post-Filtration
The final carbon block helps improve the taste and odour of the purified water before it reaches the dedicated drinking-water tap.
The filtration stages are supplied through two replacement cartridges:
Z1-E020-C: Combined 3-in-1 sediment and carbon filtration cartridge.
Z1-E020-M: Reverse osmosis membrane cartridge, incorporating the membrane and post-filtration arrangement described in the manufacturer's system design.
High-Capacity Tankless Reverse Osmosis
Traditional domestic reverse osmosis systems generally use a pressurised storage tank to hold purified water before it is dispensed.
The SPECTRUM PURE Z1-E020 uses a direct-flow design, producing purified water when the drinking-water tap is opened.
Its rated performance includes:
Performance parameter
Specification
Nominal daily production
3,000 L/day
Rated product flow
2 L/min
Equivalent hourly flow
120 L/hour
Nominal salt rejection
93%
Nominal recovery
65%
Storage tank
None
The 3,000 L/day figure is a nominal production rating, not a guaranteed household daily output. Actual production depends on water pressure, temperature, incoming TDS and other feed-water conditions.
Compact Under-Sink Installation
The Z1-E020 is designed for installation beneath a kitchen sink or in another suitable location close to the drinking-water outlet.
Its compact dimensions are:
130 × 397 × 376 mm (W × D × H)
The tankless configuration makes it particularly useful where cupboard space is limited.
The system uses push-fit connections and a dedicated stainless-steel drinking-water tap. It also requires a connection to the cold-water supply, household drainage and an electrical supply through the supplied power transformer.
Water Quality and Operating Requirements
The SPECTRUM PURE Z1-E020 is designed for municipal water supplies.
The manufacturer's installation manual specifies the following operating conditions:
Parameter
Specification
Feed-water pressure
1–4 bar
Feed-water temperature
5–38°C
Maximum feed-water TDS
500 mg/L (ppm)
Maximum feed-water turbidity
Less than 1 NTU
Nominal salt rejection
93%
Nominal water recovery
65%
Water supply
Municipal
Electrical input
100–240 V AC, 50/60 Hz
Electrical output
24 V DC, 5 A
Power consumption
120 W
Sound level
Approximately 60 dB
Do not operate the system above 4 bar. A pressure-reducing valve must be installed on the water supply if incoming pressure exceeds the manufacturer's maximum.
The system must be connected using the supplied power supply unit and must not be installed on a hot-water line.
If the source water is microbiologically unsafe or of unknown quality, adequate disinfection is required before or after the system. The manufacturer also recommends periodic water testing to verify satisfactory performance.
Automatic Flushing and Filter Monitoring
The Z1-E020 incorporates automatic flushing functions to help maintain membrane performance and support consistent operation.
Its flushing functions include:
Automatic rinse when electrical power is switched on.
Manual forced flushing using the control-panel buttons.
Automatic flushing after an extended water-production period.
Automatic flushing after an extended standby period.
The system also has separate filter-life indicators for the 3-in-1 cartridge and RO membrane cartridge.
The indicators change from blue to red as the cartridges approach the end of their programmed service life. A red indicator is a replacement reminder; the system may continue operating until the cartridge is replaced.
After cartridge replacement, the relevant filter-life indicator must be reset according to the manufacturer's instructions.
Replacement Filter Cartridges and Maintenance
The Z1-E020 uses two dedicated twist-and-lock replacement cartridges.
Replacement cartridge
Function
Manufacturer's suggested service interval
Z1-E020-C
3-in-1 sediment and carbon pre/post filtration arrangement
6–12 months
Z1-E020-M
Reverse osmosis membrane cartridge
12–24 months
These intervals are guidelines rather than guaranteed cartridge lifetimes. Actual replacement frequency depends on incoming water quality, daily consumption, sediment levels, chlorine, turbidity and hardness.
Replace cartridges sooner if water quality deteriorates, the taste changes significantly or purified-water production falls noticeably.
After replacing cartridges, reset the appropriate filter-life indicator and flush the new cartridges for approximately 5–10 minutes before returning the system to normal use.
Technical Specifications
Specification
Value
Brand
SPECTRUM
Model
PURE Z1-E020
System type
Tankless reverse osmosis
Application
Residential and light commercial
Installation
Under-sink
Filtration stages
4
Nominal production capacity
3,000 L/day
Rated product flow
2 L/min
Equivalent hourly flow
120 L/hour
Nominal salt rejection
93%
Nominal water recovery
65%
Storage tank
None
Prefilter cartridge
Z1-E020-C
RO membrane cartridge
Z1-E020-M
Cartridge connection
Twist-and-lock
Automatic flushing
Yes
Filter-life monitoring
Yes
Feed-water pressure
1–4 bar
Feed-water temperature
5–38°C
Maximum feed-water TDS
500 mg/L
Maximum feed-water turbidity
<1 NTU
Electrical input
100–240 V AC, 50/60 Hz
Electrical output
24 V DC, 5 A
Power consumption
120 W
Sound level
Approximately 60 dB
Feed connection
3/8"
Purified-water connection
1/4"
Drain connection
1/4"
Dimensions (W × D × H)
130 × 397 × 376 mm
Gross shipping weight
Approximately 15 kg
What's Included?
The standard SPECTRUM PURE Z1-E020 package includes:
SPECTRUM Z1-E020 reverse osmosis system.
Z1-E020-C 3-in-1 filter cartridge.
Z1-E020-M reverse osmosis membrane cartridge.
Power transformer.
Three-way inlet isolation valve.
Drain saddle.
Drain saddle connector.
Brushed stainless-steel drinking-water tap.
Tap quick-connect fitting.
1.5 metres of 3/8" tubing.
3 metres of 1/4" tubing.
Installation accessories and user manual.
Is the SPECTRUM PURE Z1-E020 Right for You?
Choose the SPECTRUM PURE Z1-E020 if you want a high-capacity tankless reverse osmosis system for domestic drinking water or suitable light-commercial applications.
It is particularly suitable for:
Modern kitchens where under-sink cupboard space is limited.
Households wanting purified water directly from a dedicated tap.
Customers looking for a higher-output alternative to conventional tank-based RO systems.
Small offices and light-commercial environments.
Customers who value automatic flushing and convenient cartridge replacement.
If you prefer a conventional reverse osmosis system with a storage tank and mineralisation stage, consider the Ecosoft PURE Balance range instead.
Choose the SPECTRUM PURE Z1-E020 for compact, high-capacity, on-demand reverse osmosis water purification.
