EPM Series cartridges are a modified version of our EP Series cartridge. An economical price makes this cartridge an attractive choice for taste, odour, and chlorine taste & odor reduction, as well as sediment filtration.EPM Series cartridges have a nominal 10-micron filtration rating, high porosity and chlorine taste & odour reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by an outer wrap designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.Features & Benefits
Nominal 10-micron rating
Enhanced dirt holding capacity for extended cartridge life
Lowest pressure drop
Bad taste & odour and chlorine taste & odour reduction
Economically priced
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Outer Wrap – Polyolefin
Netting – Polyethylene
Gaskets – Buna-N
Temperature Rating – 40-180°F (4.4-82.2°C)
Suitable for the polishing of trace hydrocarbons, the OilOut-99 is capable of absorbing up to three times its own weight before changeout is required. Designed to remove up to 99% of dispersed hydrocarbons, the SPECTRUM SRIF is suited to applications where the inlet contamination is below 500mg/l, such as surface run off water, CNC machine coolant and bilge separators. The OilOut-99 achieves best results as a polishing phase after primary oil removal technologies or in a double-pass system and is effective at removing a range of contaminants, including mineral oils and BTEX hydrocarbons.
SPECTRUM 870 range of activated carbon block cartridges treat water by removing the bad taste, odour and appearance associated with chemical and organic pollutants.Contaminants such as chlorine, chloramine, herbicides, solvents and dyes are all treated along with the removal of organics through absorption. Food grade coconut carbon block with higher efficiency and capacity chlorine, chemical and organic taste, odour and appearance removal.Features & Information
Extruded from high quality carbon fines the SCB has a much high adsorption capacity, extending life and improved chlorine reduction capacities over the ECB
The fine, acid washed bituminous, powdered activated carbon (PAC) used in the SCB results in a highly efficient carbon cartridge with sediment filtration capabilities
Constructed with an outer polypropylene wrap that protects and extends the life of the carbon block, capturing particles and preventing premature plugging
Food grade additives used to bond the PAC
Available in large diameter 9¾" and 20" lengths for reduced cartridge changeout frequency
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
AQUAFILTER FCCEL10 cartridges are manufactured from durable polyester non-woven fabric. They contain no binders or cellulose and have been developed specifically for drinking and bottled water applications. In order to provide increased surface area and longer life, FCCEL10 series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. FCCEL10 series cartridges provide great sediment removal and dirt holding capacity to extend the time between cartridge changeouts. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect boilers and pluming systems. Utilizing 100% synthetic media makes FCCEL10 series cartridges washable and reusable. If the cartridge becomes clogged you can easilly clean it by direct spray into pleats to dislodge sediment or let dry and brush off filter cake from surface of the media. FCCEL10 series cartridges are bacteria and chemical resistant. They are characterized with very low pressure drop.FCCEL10 series cartridges are typically used as a first stage of potable water filtration.Specifications:
Micron rating: 10
Lengths: 10"
Outer diameter: 2 1/2"
Inner diameter: 1,1"
Min. feedwater temp. 2°C
Max. feedwater temp. 60°C
Avg. Efficiency: 87%
AQUAFILTER FCCEL5 cartridges are manufactured from durable polyester non-woven fabric. They contain no binders or cellulose and have been developed specifically for drinking and bottled water applications. In order to provide increased surface area and longer life, FCCEL5 series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. FCCEL5 series cartridges provide great sediment removal and dirt holding capacity to extend the time between cartridge changeouts. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect boilers and pluming systems. Utilizing 100% synthetic media makes FCCEL5 series cartridges washable and reusable. If the cartridge becomes clogged you can easilly clean it by direct spray into pleats to dislodge sediment or let dry and brush off filter cake from surface of the media. FCCEL5 series cartridges are bacteria and chemical resistant. They are characterized with very low pressure drop.FCCEL5 series cartridges are typically used as a first stage of potable water filtration.Specifications:
Micron rating: 5
Lengths: 10"
Outer diameter: 2 1/2"
Inner diameter: 1,1"
Min. feedwater temp. 2°C
Max. feedwater temp. 60°C
Avg. Efficiency: 87%
AQUAFILTER FCCEL5M10B Big Blue cartridges are manufactured from durable polyester non-woven fabric. They contain no binders or cellulose and have been developed specifically for drinking and bottled water applications. In order to provide increased surface area and longer life, FCCEL5M10B series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. FCCEL5M10B series cartridges provide great sediment removal and dirt holding capacity to extend the time between cartridge changeouts. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect boilers and pluming systems. Utilizing 100% synthetic media makes FCCEL5M10B series cartridges washable and reusable. If the cartridge becomes clogged you can easily clean it by direct spray into pleats to dislodge sediment or let dry and brush off filter cake from surface of the media. FCCEL5M10B series cartridges are bacteria and chemical resistant. They are characterized with very low pressure drop.FCCEL5M10B series cartridges are typically used as a first stage of potable water filtration.Specifications:
Micron rating: 5
Length: 10"
Outer diameter: 4 1/2"
Inner diameter: 1,1"
Min. feedwater temp. 2°C
Max. feedwater temp. 60°C
Avg. Efficiency: 87%
Aquafilter FCPS5-AB Melt-blown antimicrobial/antibacterial polypropylene filter cartridge. These durable melt-blown water filter cartridges are the only cartridges available treated with Antimicrobial/Antibacterial nanosilver BACINIX technology. This technology is new to the water filter industry and Aquafilter is the only firm offering this advanced technology within a wide range of product lines. Antimicrobial/Antibacterial technology has been used in the medical industry and is branching out into water treatment industries. This technology helps destroy bacteria as well as inhibit the growth of mold. The blue color of the filter indicates that it has been treated for additional safety. The Aquafilter range of melt-blown cartridges have multiple fibre zones. These multi-fiber zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fiber zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: Pure PP + ANTIMICROBIAL AGENT
Filter life: 6-12 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 5
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
The CPV25105ECO is a reliable standard filter for removing common contaminants in residential water supply, ideal before activated carbon or softeners.
Specification
The replacement filter is a roll of fiber polypropylene manufactured by using melt blowing process.
The required degree of rigidity is achieved without using a core by melting fibers into a rigid structure.
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.Key Product Features
Reduces particles as small as 0.5 micron in size by mechanical means.
Reduces cysts such as Cryptosporidium and Giardia by mechanical means.
Lead reduction through 2,000 gallons
Premium dirt-holding capacity
High chlorine taste & odour and bad taste & odour reduction
The filters are intended to purify water from sediment particles such as rust, sand, scale, silt etc.
Specification
The replacement filter is a roll of fiber polypropylene manufactured by using melt blowing process.
The required degree of rigidity is achieved without using a core by melting fibers into a rigid structure.
