The Philips TUV 4W G4T5 is a ultraviolet lamp which emits high intensity germicidal light at 254nm. They are used in private water supplies, air conditioning units, aquatics, food & drink processing and medical establishments to purify air, water and hard surfaces. We recommend replacing your lamp after 6000 hours to ensure maximum disinfection. After this time, the amount of useful uv-c light diminishes and hence will not be as effective.
Type – Philips TUV 4W G4T5
Application – UV Disinfection
Power – 4 watts
Length – 150 mm
Cap – 2 pins
The Philips TUV 6W G6T5 is a ultraviolet lamp which is used to purify air, water and hard surfaces. They are used in private water supplies, air conditioning units and aquaculture. We recommend replacing this lamp after 9000 hours or 12 months service. UV Lamps replaced annually ensure high system efficacy and maximum disinfection.
Lamp – Philips TUV 6W G6T5
Application – UV Disinfection
Power – 6 watts
Length – 226 mm
Cap – 2 pin
Life – 9000 hours
The Philips TUV 8W G8T5 is a ultraviolet or germicidal lamp. They are used in air purification and water disinfection systems. Common applications include air conditioning, private water supplies and aquaculture. We recommend replacing your lamp after 9000 hours or every 12 months to ensure maximum disinfection.
Type – Philips TUV 8W G8T5
Application – Air and Water Treatment
Power – 8 watts
Length – 300 mm
Cap – 2 pins
Philips TUV 36 T5 HO 75W 4P-SE.
Output – 75 watts.
Length – 853 mm.
Base – 4 pins.
Life – 9000 hours.
This Philips lamp can be used as a equivalent to :
Lightech GHO846T5L/4.
Fits into various uv systems including :
Pallas UV480 / UV028124
Sita UV480,80/2, 80/3, 80/4, 80/5
Spectrum Sabre SUV-S-57
Spectrum Sabre SUV-S-132
Spectrum Sabre SUV-S-132-2
Spectrum Sabre SUV-S-250-2
Wonder T529 / E-480 / W-480 / HC-480
Wonderlite F15 OR FC15 / T565
Wonderlite FC-24 or FS-24
Philips TUV 55W HO G55T8. Philips 55 watt ultraviolet lamp used in air and water disinfection systems. Common applications are Pond UV Filters and clarifiers, Residential Drinking Water Systems and Air Disinfection units. They are 99.9% effective against bacteria, viruses and other harmful pathogens. Philips ultraviolet lamps have the lowest percentage of lamps that fail prematurely in the market.
This lamp fits into the following Pond UV Filters :
Daro ECO-3
Daro ECO-5
Evolution Aqua Evo 55w UVC
Evolution Aqua Evo 110w UVC
Kockney Koi Yamitsu 55w UVC
TMC Pro Clear UV55
TMC Pro Pond UV55 and UV110
Philips TUV 75W HO G75T8 ultraviolet lamp.
Used in Air and Water Disinfection systems.
Output – 75 watts.
Length – 1213 mm.
Cap – 2 pins.
Wavelength – 254 nm.
Life – 9000 hours.
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on. Size below depicts base dimensions.
The original ... since 1988
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on.
Point Four diffusers use a specially developed, ultra fine pore ceramic plate that produces a cloud of extremely fine bubbles of approximately 100–500 microns; far superior to airstones, porous hose or membrane type designs. The flat plate design ensures uniform bubbles across the entire surface and minimizes bubble coalescence to achieve an absorption rate in excess of 80%, depending on depth and flowrate. Bubbling Pressure is 25 to 35 psi. (1.7 to 2.4 bar).
Applications for micro-bubble diffusers include pure gas applications (pure oxygen, carbon dioxide), high-density hauling, holding/growout tanks and emergency aeration.
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on. Size below depicts base dimensions.
The original ... since 1988
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on.
Point Four diffusers use a specially developed, ultra fine pore ceramic plate that produces a cloud of extremely fine bubbles of approximately 100–500 microns; far superior to airstones, porous hose or membrane type designs. The flat plate design ensures uniform bubbles across the entire surface and minimizes bubble coalescence to achieve an absorption rate in excess of 80%, depending on depth and flowrate. Bubbling Pressure is 25 to 35 psi. (1.7 to 2.4 bar).
Applications for micro-bubble diffusers include pure gas applications (pure oxygen, carbon dioxide), high-density hauling, holding/growout tanks and emergency aeration.
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on. Size below depicts base dimensions.
The original ... since 1988
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on.
Point Four diffusers use a specially developed, ultra fine pore ceramic plate that produces a cloud of extremely fine bubbles of approximately 100–500 microns; far superior to airstones, porous hose or membrane type designs. The flat plate design ensures uniform bubbles across the entire surface and minimizes bubble coalescence to achieve an absorption rate in excess of 80%, depending on depth and flowrate. Bubbling Pressure is 25 to 35 psi. (1.7 to 2.4 bar).
Applications for micro-bubble diffusers include pure gas applications (pure oxygen, carbon dioxide), high-density hauling, holding/growout tanks and emergency aeration.
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on. Size below depicts base dimensions.
The original since 1988
These aquaculture-duty diffusers are among the most efficient diffusers available, allowing you to increase yield while controlling the cost of expensive gases. Made from premium materials and subject to rigorous testing, Micro Bubble Diffusers provide the kind of performance and reliability our reputation is built on.
Point Four diffusers use a specially developed, ultra fine pore ceramic plate that produces a cloud of extremely fine bubbles of approximately 100–500 microns; far superior to airstones, porous hose or membrane type designs. The flat plate design ensures uniform bubbles across the entire surface and minimizes bubble coalescence to achieve an absorption rate in excess of 80%, depending on depth and flowrate. Bubbling Pressure is 25 to 35 psi. (1.7 to 2.4 bar).
Applications for micro-bubble diffusers include pure gas applications (pure oxygen, carbon dioxide), high-density hauling, holding/growout tanks and emergency aeration.
