2 stage countertop water filter. System includes FCPS20 filter cartridge, which removes sediments such as sand, silt, rust, suspended solids down to 20 µm and FCCBL cartridge which removes free chlorine, certain pesticides, organic compounds, improves taste and aroma of water. FHCTF2 is easy to install and use. It can be placed on a kitchen countertop and connected directly to kitchen faucet.Sets include: FHCTF2 filter, FCPS20, FCCBL cartridges, faucet, faucet connector, tubing, instruction, colour box.
Aquafilter FHPRA series - washing machine filter. Are filled with polyphosphate, antiscale and anti-lime media. Polyphosphate prevents scale by reacting with dissolved hardness minerals (e.g. calcium carbonate and calcium bicarbonate) and transforming them into harmless, microscopic crystals of calcium orthophosphate.
These crystals stay suspended in water and will not create scale build-up in heating elements, pipes, water heaters, boilers, etc. Moreover polyphosphate helps to deal with iron and all the problems which it causes. Polyphosphates do not remove iron from water. Rather they stabilize and disperse the iron so that the water remains clear and does not produce iron stains. The FHPRA series filter cartridges require very little maintenance, no backwashing and no salt.
Cartridges include pre- and post-filters preventing media particles from being washed out. FHPRA is designed for use with cold tap water. This filter should be installed between water supply valve and washing machine using connection adapter 3/4"male x 3/4" FIP.
10” in-line set Big Blue type: Big Blue type filter housing, with blue sump and pressure relief valve, mounting bracket with screws, wrench, bacteriostatic filter centralizing ring, instruction and colour box. Available with: 1", 1 1/4", 1 1/2" BSP connection. Head is equipped with pressure relief valve which enables release of air accumulated after cartridge replacement.Features:
High quality
NSF certified
FDA CFR Title 21 Compliance
Factory Tested
Domestic and commercial use
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Ideal for POE use
Equipped with filter bracket, wrench and pressure gauge
Equipped with antibacterial and antimicrobial filter centralizing ring
Full flow 1” ports
Made in EU with High Performance
Components
Specifications:
Housing: PP
Cap: PP
Pressure relief valve: brass
O-ring: NBR
Thread: 1" BSP
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 43°C
Aquafilter FHPR1-HP1 1" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR1-HP1 1" BSP housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR1-HP1 1" BSP filter housing consist of a transparent sump and head with 1” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR1-HP1 housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1" BSPMaximum Pressure: 10 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 45°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 1” BSP ports
Made in EU with High Performance Components
Aquafilter FHPR34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B1-AQ filter housing consist of a transparent sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR34-B1-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter Filter Housing FHPRCL12-B-TRIPLE 1/2" BSP
This high-quality Aquafilter filter housing is perfect for both residential and industry use. Designed to accommodate a triple 1/2" BSP filter configuration, this housing ensures efficient water filtration for a variety of applications.
Premium Filtration for Clean Water
With the Aquafilter Filter Housing FHPRCL12-B-TRIPLE, you can trust that your water is clean and safe for drinking, cooking, and other uses. The durable construction of this housing is built to withstand daily use and provide reliable filtration performance.
Easy Installation and Maintenance
Installing and maintaining this filter housing is a breeze, thanks to its user-friendly design. Whether you're a homeowner looking to improve your water quality or a business owner in need of a dependable filtration solution, this Aquafilter housing is an excellent choice.
Aquafilter FHPRN12-B1-AQ 1/2" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN12-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN12-B1-AQ filter housing consist of a blue sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN12-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 1/2” BSP ports- Made in EU with High Performance Components
FHPR34-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR34-B-AQ housings can be mounted individually or connected in a seriesSpecifications:
Blue sump: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
O-ring: NBR
Number of o-rings: 2
Thread: 3/4" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum temperature: 2ºC
Maximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRN34-B-TWIN 3/4" BSP two stage system with two blue filter heads with 3/4" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN34-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
Aquafilter FHPRN34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN34-B1-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN34-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 3/4” BSP ports- Made in EU with High Performance Components
The Aquafilter HHBB10A 10" Big Blue Two-Stage Water Filter System is a high-capacity water filtration solution designed for domestic, commercial and industrial Point of Entry (POE) applications.
Manufactured by Aquafilter, this professional filtration system features two heavy-duty 10" Big Blue filter housings mounted on a robust metal support platform. Its two-stage configuration allows different filtration technologies to be combined, providing a flexible solution for treating incoming cold water.
Designed for high-flow applications, the HHBB10A features 1" BSP brass inlet and outlet connections, integrated pressure gauges and pressure relief valves for convenient monitoring and maintenance.
Compatible with a wide range of standard 10" x 4.5" Big Blue filter cartridges, the system can be configured to address different incoming water quality requirements.
Whether you require sediment filtration, chlorine reduction, improved taste and odour or specialist water treatment, the Aquafilter HHBB10A provides a versatile foundation for customised whole-house water filtration.
Key Features & Benefits
Two-stage filtration: Two independent 10" Big Blue filter housings allow different filtration technologies to be combined.
Whole-house water filtration: Designed for Point of Entry installations, treating incoming water before it reaches household plumbing.
High-flow design: Large-diameter Big Blue housings accommodate high-capacity filter cartridges.
Heavy-duty construction: Durable polypropylene filter housings with brass connection inserts.
1" BSP brass connections: Full-flow inlet and outlet connections for straightforward plumbing integration.
Integrated pressure monitoring: Two pressure gauges allow monitoring of inlet and outlet pressure.
Pressure relief valves: Help release trapped air and residual pressure during filter cartridge replacement.
Flexible cartridge compatibility: Accepts standard 10" x 4.5" Big Blue filter cartridges.
Bacteriostatic cartridge centralising rings: Help position and centralise filter cartridges within the housings.
Blue filter housings: Help protect cartridges against algae growth when installed in locations exposed to sunlight.
Metal mounting platform: Provides a stable and convenient installation arrangement.
Factory assembled and leak tested: Supplied ready for installation.
No electricity required: Operates using the incoming water supply without electrical power.
Two-Stage Water Filtration – Customise Your System
One of the main advantages of the Aquafilter HHBB10A is its flexibility.
The two individual filter housings can accommodate different types of 10" Big Blue cartridges, allowing the system to be configured according to incoming water quality and specific treatment requirements.
A typical filtration configuration might include:
Stage 1 – Sediment Filtration
A sediment filter cartridge helps reduce suspended particles such as sand, rust, silt and other particulate matter from the incoming water supply.
This initial filtration stage helps protect downstream equipment and improve the quality of incoming water.
Stage 2 – Activated Carbon Filtration
An activated carbon cartridge helps reduce chlorine, unpleasant tastes and odours, improving the aesthetic quality of the water supply.
Depending on the selected carbon technology, cartridges may also reduce certain organic compounds.
Alternative Specialist Cartridge Combinations
The two housings can also accommodate specialist cartridges for specific water treatment requirements, including:
Iron reduction.
Scale reduction.
Additional sediment filtration.
Specialist contaminant reduction.
The appropriate cartridge combination should always be selected according to incoming water quality and the intended treatment objectives.
Integrated Pressure Gauges & Easy Maintenance
The Aquafilter HHBB10A incorporates two pressure gauges positioned at the inlet and outlet of the filtration assembly.
These gauges allow users to monitor pressure before and after the filter system.
An increasing pressure difference across the filtration system can indicate that filter cartridges are becoming loaded with contaminants and may require replacement.
Integrated pressure relief valves allow trapped air and residual pressure to be released during servicing, helping simplify routine cartridge changes.
The system is also supplied with a dedicated filter housing wrench for easier maintenance.
High-Capacity 10" Big Blue Filter Cartridges
The HHBB10A uses standard 10" x 4.5" Big Blue filter cartridges.
The wider Big Blue cartridge format offers a larger filtration surface area and greater media capacity than conventional slimline 10" filter cartridges.
This makes the system particularly suitable for domestic and commercial water filtration installations where higher flow rates and increased cartridge capacity are desirable.
The standardised cartridge dimensions also provide flexibility when selecting replacement filters from a wide range of compatible manufacturers.
Suitable Applications
The Aquafilter HHBB10A is suitable for a variety of cold-water filtration applications, including:
Domestic whole-house water filtration.
Residential Point of Entry (POE) installations.
Commercial buildings and premises.
Small industrial water treatment installations.
Agricultural water filtration applications.
Borehole and well-water pre-filtration.
Pre-filtration for downstream water treatment equipment.
Sediment and chlorine reduction installations.
Its two-stage configuration makes it particularly useful where two complementary filtration processes are required within a compact installation.
Technical Specifications
Specification
Details
Manufacturer
Aquafilter
Model
HHBB10A
Product type
Two-stage Big Blue filtration system
Number of filter housings
2
Cartridge size
10" x 4.5" Big Blue
Inlet connection
1" BSP
Outlet connection
1" BSP
Housing material
Polypropylene (PP)
Housing head material
Polypropylene (PP)
Connection inserts
Brass
Pressure relief valves
Brass
Pressure gauges
2
O-ring material
NBR
Maximum operating pressure
6 bar (90 psi)
Minimum water temperature
2°C
Maximum water temperature
45°C
System dimensions (H x W x D)
540 x 350 x 220 mm
Country of manufacture
EU
What Is Included?
The Aquafilter HHBB10A filtration system includes:
2 x 10" Big Blue filter housings.
1 x metal mounting platform.
2 x pressure gauges with brass extensions.
Brass connection adapters.
2 x bacteriostatic filter cartridge centralising rings.
Housing O-rings.
1 x filter housing wrench.
Integrated pressure relief valves.
Installation instructions.
Please note: Filter cartridges are not included unless specifically stated in the product listing. Two compatible 10" x 4.5" Big Blue cartridges should be purchased separately and selected according to your water treatment requirements.
Why Choose the Aquafilter HHBB10A?
The Aquafilter HHBB10A combines the flexibility of two-stage filtration with the durability and high-flow characteristics of Big Blue filter housings.
Its 10" cartridge configuration makes it a practical solution for domestic and commercial installations where multiple filtration processes are required without the larger footprint of a 20" system.
Integrated pressure gauges make monitoring easier, while brass connections, pressure relief valves and a robust metal mounting platform provide a professional installation solution.
Whether you are upgrading domestic water filtration or specifying equipment for a commercial installation, the HHBB10A provides a versatile foundation for whole-house water treatment.
Available from GroAqua, your specialist supplier of professional water filtration and water treatment equipment.
The Aquafilter HHBB10B 10" Big Blue Triple Water Filter System is a heavy-duty, three-stage water filtration solution designed for domestic, commercial and industrial applications.
Manufactured by Aquafilter, this high-capacity filtration system features three 10" Big Blue filter housings mounted on a sturdy metal support platform. Its three-stage configuration allows different filtration technologies to be combined, providing a flexible solution for treating incoming cold water.
Designed for whole-house (Point of Entry) water treatment, the HHBB10B features full-flow 1" BSP brass connections, integrated pressure gauges and pressure relief valves for convenient monitoring and maintenance.
Compatible with a wide range of standard 10" x 4.5" Big Blue filter cartridges, this system can be configured to address different water quality requirements.
Whether you need sediment filtration, chlorine reduction, taste and odour improvement or specialist water treatment, the Aquafilter HHBB10B provides a versatile foundation for a customised filtration installation.
Key Features & Benefits
Three-stage filtration: Three independent 10" Big Blue filter housings allow different filtration technologies to be combined.
Whole-house water filtration: Designed for Point of Entry (POE) installations, treating incoming water before it reaches household plumbing.
High-flow design: Large-diameter Big Blue housings accommodate high-capacity filter cartridges.
Heavy-duty construction: Robust polypropylene housings with brass connection inserts.
1" BSP brass connections: Full-flow connections for straightforward plumbing integration.
Integrated pressure monitoring: Two pressure gauges monitor inlet and outlet pressure, helping identify pressure drops across the filtration system.
Pressure relief valves: Allow trapped air and residual pressure to be released during filter cartridge replacement.
Flexible cartridge compatibility: Accepts standard 10" x 4.5" Big Blue filter cartridges.
Bacteriostatic cartridge centralising rings: Help position and centralise filter cartridges within the housings.
Blue filter housings: Help protect cartridges against algae growth when installed in locations exposed to sunlight.
Stable metal mounting platform: Provides a secure and convenient installation arrangement.
No electricity required: Operates using the incoming water supply without electrical power.
Three-Stage Water Filtration – Customise Your System
One of the main advantages of the Aquafilter HHBB10B is its flexibility.
The three individual filter housings can accommodate different types of 10" Big Blue cartridges, allowing the system to be configured according to incoming water quality and specific treatment objectives.
Typical cartridge combinations include:
Stage 1 – Sediment Filtration
A sediment cartridge helps reduce suspended particles such as sand, rust, silt and other particulate matter from the incoming water supply.
Stage 2 – Activated Carbon Filtration
An activated carbon cartridge helps reduce chlorine, unpleasant tastes and odours, improving the aesthetic quality of the water.
Stage 3 – Specialist Water Treatment
The third housing can accommodate a specialist cartridge selected for particular water treatment requirements, such as iron reduction or other targeted filtration applications.
The final cartridge configuration should always be selected according to a water analysis and the required treatment outcome.
Integrated Pressure Gauges & Easy Maintenance
The Aquafilter HHBB10B incorporates two pressure gauges positioned at the inlet and outlet of the filtration assembly.
These gauges allow users to monitor pressure before and after the filter system. An increasing pressure difference can indicate that filter cartridges are becoming loaded with contaminants and may require replacement.
Integrated pressure relief valves allow trapped air and residual pressure to be released during servicing, helping make routine cartridge changes more straightforward.
The system also includes a dedicated filter housing wrench for easier maintenance.
Suitable Applications
The Aquafilter HHBB10B is suitable for a variety of cold-water filtration applications, including:
Domestic whole-house water filtration.
Residential Point of Entry (POE) water treatment.
Commercial buildings and premises.
Small industrial water treatment installations.
Agricultural water filtration applications.
Pre-filtration for downstream water treatment equipment.
Sediment and chlorine reduction installations.
Its three-stage design makes it particularly useful where multiple filtration processes are required within one compact installation.
Technical Specifications
Specification
Details
Manufacturer
Aquafilter
Model
HHBB10B
Product type
Three-stage Big Blue filtration system
Number of filtration housings
3
Cartridge size
10" x 4.5" (Big Blue)
Connection size
1" BSP
Connection inserts
Brass
Housing material
Polypropylene (PP)
Housing head material
Polypropylene (PP)
Pressure relief valves
Brass
Pressure gauges
2
O-ring material
NBR
Centralising rings
Bacteriostatic
Mounting
Metal support platform
Maximum operating pressure
6 bar (90 psi)
Minimum operating temperature
2°C
Maximum operating temperature
43°C
Dimensions (W x D x H)
540 x 220 x 540 mm
Country of manufacture
EU
What Is Included?
The Aquafilter HHBB10B triple filtration system includes:
3 x 10" Big Blue filter housings.
1 x metal mounting platform.
2 x pressure gauges (inlet and outlet).
3 x bacteriostatic and antimicrobial filter cartridge centralising rings.
1 x filter housing wrench.
Integrated pressure relief valves.
Installation instructions.
Please note: Filter cartridges are not included. Three compatible 10" x 4.5" Big Blue cartridges must be purchased separately and selected according to your water treatment requirements.
Why Choose the Aquafilter HHBB10B?
The Aquafilter HHBB10B combines the flexibility of three-stage filtration with the durability and high-flow characteristics of Big Blue filter housings.
Its 10" cartridge configuration makes it a practical solution for domestic and commercial installations where multiple filtration stages are required without the larger footprint of a 20" system.
With integrated pressure monitoring, brass connections, pressure relief valves and a robust metal mounting platform, the HHBB10B provides a professional filtration platform that can be tailored to different water quality challenges.
Available from GroAqua, your specialist supplier of professional water filtration and water treatment equipment.
The Aquafilter HHBB20A 20" Big Blue Two-Stage Water Filter System is a high-capacity water filtration solution designed for domestic, commercial and industrial Point of Entry (POE) applications.
Manufactured by Aquafilter, this professional filtration system features two heavy-duty 20" Big Blue filter housings mounted on a robust metal support platform. Its two-stage configuration allows different filtration technologies to be combined, providing an effective and flexible approach to whole-house water treatment.
Designed for high-flow applications, the HHBB20A features 1" BSP brass inlet and outlet connections, integrated pressure gauges and pressure relief valves.
Compatible with a wide range of standard 20" x 4.5" Big Blue filter cartridges, the system can be configured to address different incoming water quality requirements.
Whether you require sediment filtration, chlorine reduction, improved taste and odour or specialist water treatment, the Aquafilter HHBB20A provides a versatile platform for customised water filtration.
Key Features & Benefits
Two-stage filtration: Two independent 20" Big Blue housings allow different filtration processes to be combined.
High-capacity filtration: Large 20" x 4.5" cartridges provide substantial filtration capacity for whole-house applications.
Whole-house water treatment: Designed for Point of Entry installations, treating incoming water before it enters the property's plumbing system.
High-flow design: Large-diameter Big Blue housings accommodate high-capacity filter cartridges.
Heavy-duty construction: Durable polypropylene filter housings with brass connection inserts.
1" BSP brass connections: Full-flow inlet and outlet connections for straightforward plumbing integration.
Integrated pressure monitoring: Two pressure gauges allow monitoring of inlet and outlet pressure.
Pressure relief valves: Help release trapped air and residual pressure during filter cartridge replacement.
Flexible cartridge compatibility: Accepts a wide range of standard 20" x 4.5" Big Blue filter cartridges.
Bacteriostatic cartridge centralising rings: Help position filter cartridges correctly within the housings.
Blue filter housings: Designed to provide microbial protection in installations exposed to sunlight.
Metal mounting platform: Provides a stable and convenient installation arrangement.
Factory assembled and leak tested: Supplied ready for installation.
No electricity required: Operates using the incoming water supply without electrical power.
Two-Stage Water Filtration – Customise Your System
One of the main advantages of the Aquafilter HHBB20A is its flexibility.
The two filter housings can accommodate different types of 20" Big Blue cartridges, allowing the system to be configured according to incoming water quality and specific treatment requirements.
A typical configuration might include:
Stage 1 – Sediment Filtration
A 20" sediment filter cartridge helps reduce suspended particles such as sand, rust, silt and other particulate matter.
This initial filtration stage helps protect downstream equipment and improve the quality of incoming water.
Stage 2 – Activated Carbon Filtration
An activated carbon cartridge helps reduce chlorine, unpleasant tastes and odours, improving the aesthetic quality of the water supply.
Carbon filtration can also help reduce certain organic compounds, depending on the cartridge technology selected.
Alternative Specialist Cartridge Combinations
The two housings can also be configured with specialist cartridges for specific water treatment requirements, including:
Iron reduction.
Water softening and scale reduction.
Additional sediment filtration.
Specialist contaminant reduction.
The appropriate cartridge combination should be selected according to a water analysis and the intended treatment objectives.
Integrated Pressure Gauges & Easy Maintenance
The Aquafilter HHBB20A incorporates two pressure gauges positioned at the inlet and outlet of the filtration assembly.
These gauges allow users to monitor pressure before and after the filter system.
An increasing pressure difference across the filtration system can indicate that cartridges are becoming loaded with contaminants and may require replacement.
The integrated pressure relief valves allow trapped air and residual pressure to be released during servicing, helping simplify routine cartridge changes.
The system is supplied with a dedicated filter housing wrench for easier maintenance.
High-Capacity 20" Big Blue Filter Cartridges
The HHBB20A uses standard 20" x 4.5" Big Blue filter cartridges.
Compared with smaller standard-diameter filter cartridges, Big Blue cartridges offer a larger filtration surface area and greater media capacity, making them particularly suitable for whole-house and higher-demand water filtration installations.
The larger cartridge format also provides flexibility when selecting replacement filters for different water treatment requirements.
Suitable Applications
The Aquafilter HHBB20A is suitable for a variety of cold-water filtration applications, including:
Domestic whole-house water filtration.
Residential Point of Entry (POE) installations.
Commercial buildings and premises.
Industrial water treatment systems.
Agricultural water filtration applications.
Borehole and well-water pre-filtration.
Pre-filtration for reverse osmosis systems.
Sediment and chlorine reduction installations.
Its two-stage configuration makes it particularly useful where two complementary filtration processes are required within one compact installation.
Technical Specifications
Specification
Details
Manufacturer
Aquafilter
Model
HHBB20A
Product type
Two-stage Big Blue filtration system
Number of filter housings
2
Cartridge size
20" x 4.5" Big Blue
Inlet connection
1" BSP
Outlet connection
1" BSP
Housing material
Polypropylene (PP)
Housing head material
Polypropylene (PP)
Connection inserts
Brass
Pressure relief valves
Integrated
Pressure gauges
2
O-ring material
NBR
Operating pressure
Maximum 6 bar (90 psi)
Minimum water temperature
2°C
Maximum water temperature
45°C
System dimensions (H x W x L)
720 x 380 x 220 mm
Cartridge dimensions
20" x 4.5"
Country of manufacture
EU
What Is Included?
The Aquafilter HHBB20A filtration system includes:
2 x 20" Big Blue filter housings.
1 x metal mounting platform.
2 x pressure gauges with brass extensions.
Brass connection adapters.
2 x bacteriostatic filter cartridge centralising rings.
Housing O-rings.
1 x filter housing wrench.
Integrated pressure relief valves.
Installation instructions.
Please note: Filter cartridges are not included unless specifically stated in the product listing. Two compatible 20" x 4.5" Big Blue cartridges should be purchased separately and selected according to your water treatment requirements.
Why Choose the Aquafilter HHBB20A?
The Aquafilter HHBB20A combines high-capacity Big Blue filtration with a practical two-stage configuration suitable for a wide range of water treatment applications.
Its larger 20" cartridge format provides substantial filtration capacity, while the two independent housings allow sediment, carbon and specialist filtration technologies to be combined.
Integrated pressure gauges make monitoring easier, while brass connections, pressure relief valves and a robust mounting platform provide a professional installation solution.
Whether you are upgrading domestic water filtration or specifying equipment for a commercial installation, the HHBB20A offers a flexible and reliable foundation for whole-house water treatment.
Available from GroAqua, your specialist supplier of professional water filtration and water treatment equipment.
The Aquafilter HHBB20B 20" Big Blue Triple Water Filter System is a high-capacity, three-stage water filtration solution designed for whole-house, commercial and industrial applications.
Manufactured by Aquafilter, this heavy-duty filtration system features three 20" Big Blue filter housings mounted on a robust metal support frame. Its high-capacity design allows multiple filtration stages to be combined, providing a flexible solution for treating incoming cold water.
With 1" brass inlet and outlet connections, integrated pressure gauges and pressure relief valves, the HHBB20B is designed for reliable operation, straightforward maintenance and effective filtration monitoring.
Compatible with a wide range of standard 20" x 4.5" Big Blue filter cartridges, the system can be configured to address different water treatment requirements.
Key Features & Benefits
Three-stage filtration: Three independent 20" Big Blue housings allow multiple filtration processes to be combined.
High-capacity filtration: Designed for whole-house, commercial and industrial water treatment applications.
Heavy-duty construction: Robust polypropylene filter housings with brass connection inserts.
1" brass connections: Full-flow inlet and outlet connections for straightforward plumbing integration.
Pressure monitoring: Two integrated pressure gauges allow monitoring of pressure before and after the filtration system.
Pressure relief valves: Help release trapped air and residual pressure during filter cartridge replacement.
Flexible cartridge compatibility: Accepts a wide range of standard 20" x 4.5" Big Blue filter cartridges.
Bacteriostatic centralising rings: Help position and centralise filter cartridges within their housings.
Metal mounting platform: Provides a stable and convenient installation arrangement.
No electricity required: Operates using the incoming water supply without electrical power or a drain connection.
Flexible Three-Stage Water Filtration
One of the main advantages of the Aquafilter HHBB20B is its ability to accommodate different filter cartridge combinations.
Depending on the incoming water quality and treatment objectives, the three housings can be configured using different cartridge types, including:
Sediment filter cartridges: Reduce suspended particles such as sand, rust, silt and other particulate matter.
Activated carbon cartridges: Help reduce chlorine, unpleasant tastes and odours.
Specialist treatment cartridges: Options are available for specific water treatment requirements, including iron reduction and other applications, depending on the selected cartridge.
This flexibility makes the HHBB20B suitable for a wide range of whole-house and commercial water treatment installations.
Integrated Pressure Monitoring
The system incorporates two pressure gauges positioned at the inlet and outlet.
Monitoring the pressure difference across the filtration system helps identify increasing resistance as filter cartridges become loaded with contaminants.
The integrated pressure relief valves also allow trapped air to be released following cartridge replacement, helping simplify routine servicing and maintenance.
Suitable Applications
The Aquafilter HHBB20B is designed for high-capacity cold-water filtration applications, including:
Whole-house water filtration.
Domestic water treatment installations.
Commercial buildings and premises.
Industrial water treatment systems.
Agricultural and specialist water filtration applications.
Pre-filtration for downstream water treatment equipment.
Technical Specifications
Specification
Details
Manufacturer
Aquafilter
Model
HHBB20B
Product type
Three-stage Big Blue filtration system
Filtration stages
3
Cartridge size
20" x 4.5"
Inlet/outlet connections
1" brass inserts
Housing material
Polypropylene (PP)
Cap material
Polypropylene (PP)
Connection inserts
Brass
Pressure relief valves
Brass
Pressure gauges
2
O-ring material
NBR
Maximum operating pressure
6 bar (90 psi)
Minimum water temperature
2°C
Maximum water temperature
45°C
Manufacturer's dimensions
720 x 380 x 220 mm (H x W x L)
Country of manufacture
EU
What Is Included?
The Aquafilter HHBB20B system includes:
3 x 20" Big Blue filter housings.
1 x metal mounting platform.
2 x pressure gauges with brass extensions.
3 x bacteriostatic filter cartridge centralising rings.
1 x filter housing wrench.
Installation instructions.
Please note: Filter cartridges are not included and should be selected separately according to the required water treatment application.
Why Choose the Aquafilter HHBB20B?
The Aquafilter HHBB20B provides a versatile and robust platform for high-capacity water filtration. Its three-stage configuration allows different filtration technologies to be combined in one installation, while the integrated pressure gauges make routine monitoring easier.
Whether you are installing a whole-house water filtration system or specifying equipment for a commercial or industrial project, the HHBB20B offers a flexible solution using widely available Big Blue filter cartridges.
Available from GroAqua, your specialist supplier of professional water treatment and filtration equipment.
Efficient Sediment Removal
Upgrade your water filtration system with the Aquafilter In-Line External 5 Micron Sediment Removal Water Filter AIPRO. This inline water filter effectively removes sediment, dirt, rust particles, and other impurities from your water supply, ensuring cleaner and safer water for you and your family. Say goodbye to cloudy or foul-tasting water with this high-quality filtration solution.
Simple Installation Process
This Aquafilter water filter is designed for easy installation and maintenance. It can be seamlessly integrated into your existing fridge filter system or used as a standalone filtration solution. With its compact and space-saving design, you can enjoy the benefits of clean, filtered water without any hassle. Keep your water supply free from contaminants with this convenient and reliable inline water filter.
Long-Lasting Performance
With its durable construction and efficient filtration capabilities, the Aquafilter In-Line External 5 Micron Sediment Removal Water Filter AIPRO is built to last. Enjoy peace of mind knowing that your water is consistently being filtered to remove impurities and provide you with pure, refreshing water. Invest in this top-of-the-line filtration solution for reliable performance and superior water quality every day.
Aquafilter brass extension for KCGA-1 pressure gauge. Allows proper installation of the pressure gauge on H10C, HB1B, HB1D, HB1C, HB2B, HB2D, HB2C, H105 series housing.
Aquafilter NI-212-CENT-GR-AB antibacterial filter cartridge centralizing ring.This product centralizes the filter cartridge inside its housing, reduces the risk of damage to the cartridge and housing elements at installation, and ensures seal tightness of the housing head - all while protecting your filter from bacteria and other microorganisms, thanks to new nanosilver technology.Features:
Competitive Pricing
Improves ease of cartridge installation
Increases ease of correct installation
Ensures proper vertical position of cartridge within housing
Stabilizes and centralizes cartridge for equal water distribution
Removes risk of bacteria
BACINIX nanosilver technology, providing antibacterial and antimicrobial protection
Centralizers inhibit harmful growth of bacteria, fungi and molds by using nanosilver BACINIX technology
Reduces risk of dislodging cartridge
Protects cartridge from faults due to poor positioning
Facilitates consistently correct cartridge installation
Made in the EU with High Quality materials
Aquafilter OR-H10-1 set bottom (blue) and top (black ) O-rings for filter housing: Top O-ring for filter housing: H10A, H10B, H10B-AB, H10C, H10D, H10K, H105.
Reduce harmful contaminants
Aquafilter Premium 3 Stage HMA Heavy Metal Reduction Water Filter System 10" Replacements are designed to efficiently reduce heavy metals, chlorine, taste, and odors in your water. With three stages of filtration, this system ensures that you and your family are drinking clean and safe water every day.
Enhance the taste of your water
Experience great-tasting water with Aquafilter Premium replacements. The advanced filtration technology helps to remove unpleasant tastes and odors, leaving you with refreshing and pure drinking water. Say goodbye to the chemical taste of chlorine and enjoy crisp, clean water with every sip.
Easy to replace and install
Installing Aquafilter Premium 3 Stage HMA Heavy Metal Reduction Water Filter System 10" Replacements is quick and simple. Just follow the instructions provided and enjoy hassle-free replacement. Keep your water filter system working effectively and continue to enjoy cleaner, better-tasting water for you and your loved ones.
High-Quality Water Filters
Upgrade your Aquafilter system with the FCPP5 FCCBL FCCBKDF2 replacement cartridges set. These cartridges are designed to provide exceptional water filtration, ensuring that your drinking water is clean and safe for consumption. The carbon block technology effectively removes impurities and contaminants from your water, giving you peace of mind knowing that your family is protected.
Carbon Block Technology
The replacement cartridges feature carbon with KDF and softening media, enhancing the filtration process to deliver great-tasting water. The carbon block design ensures that chlorine, lead, and other harmful substances are effectively removed from your water, while the addition of KDF and softening media helps to reduce scale buildup and improve the overall quality of your drinking water. Say goodbye to unpleasant odors and tastes with these innovative cartridges.
Easy Installation and Maintenance
These replacement cartridges are easy to install and require minimal maintenance, making it convenient to keep your Aquafilter system performing at its best. With a simple twist-on design, you can quickly replace your old cartridges and enjoy fresh, clean water in no time. Trust the FCPP5 FCCBL FCCBKDF2 replacement cartridges set to provide reliable filtration and long-lasting performance for your home or office.
AQUAFILTER FCPRA-10BBW cartridges are a reliable remedy for combating scale and other problems caused by dissolved hardness minerals in water. The polyphosphate contained in the cartridges reacts with calcium carbonate and bicarbonate, transforming them into harmless microscopic crystals of calcium orthophosphate. These crystals remain suspended in water and do not create scale in heating elements, pipes, water heaters, boilers, etc. Moreover, polyphosphate helps to cope with iron and all the problems it causes.
FCPRA-10BBW cartridges from AQUAFILTER do not require much maintenance and do not require backwashing and the use of salt. The filters have been specially designed to allow water to flow from the bottom up, ensuring long contact times and maximum performance. The cartridges also include pre- and post-filters that prevent leaching of product particles and ensure maximum filtration efficiency.
AQUAFILTER FCPRA-10BBW cartridges are the perfect solution for anyone looking for a reliable and effective way to deal with scale and other water problems. In our online store you can order FCPRA-10BBW cartridges in any quantity and at affordable prices. We offer fast delivery to any region of Ukraine and guarantee product quality.
In addition, AQUAFILTER FCPRA-10BBW cartridges are very easy to use and maintain. They are easy to install and replace, making them an ideal choice for those looking for a convenient and reliable water treatment solution.
Efficient Scale Reduction
Upgrade your water filtration system with the Aquafilter Scale Reduction Cartridge 20" Large Diameter. This innovative cartridge is designed to effectively reduce limescale buildup in your water, resulting in cleaner and softer water for your household. Say goodbye to stubborn limescale stains on your appliances and fixtures with this high-performance filter.
Advanced Water Softening
This large diameter cartridge utilizes advanced technology to soften hard water and improve the overall quality of your household water supply. Enjoy the benefits of smoother skin and hair, as well as longer-lasting plumbing fixtures. With the Aquafilter Scale Reduction Cartridge 20", you can trust that your water is safe, clean, and refreshing to use every day.
Easy Installation
Experience hassle-free installation with the Aquafilter Scale Reduction Cartridge 20". Designed for convenience, this cartridge is compatible with most standard water filtration systems and can be easily replaced when needed. Keep your water system running smoothly and efficiently with this reliable scale reduction solution.
Set contains
FCPS5 sediment cartridge
FCPRA10 anti-scale cartridge filled with polyphosphate
FCCST Water softening cartridge
Stage 1Sediment filter removes sand, rust, silt and other sediments up to 5 micron
Stage 2FCPRA cartridges provide a strong inhibition against scaling processes in which calcium, magnesium, iron and manganese are involved. By preventing the scale deposition of many compounds, FCPRA extends the service life of your water pipes , boilers and heating elements, enhancing an efficient and clean supply of your drinking water.
Stage 3FCCST Water softening cartridge. Through its accurate media consisted of ion exchange-based resin, FCCST reduces calcium and magnesium. In case your feed water contains a high concentration of suspended matter. The softening effect takes place within the filter without adding any salt or chemicals into the water. The filter removes harmful substances and reduce limescale, prolonging life-span of your home appliances such as washing machine or dishwasher and saving you money.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Set contains
FCPS5 sediment cartridge
Premium FCCBL carbon block cartridge with cation exchange based resin
FCCST2 Water softening and iron reducing cartridge
Stage 1Sediment filter removes sand, rust, silt and other sediments up to 5 micron
Stage 2Activated carbon block cartridge removes levels of Chlorine, Organic Compounds, Pesticides, Herbicides, Trihalomethanes and Volatile Organic Compounds (VOCs). Additionally, the cation exchange based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean water.
Stage 3FCCST2 Water softening and iron reducing cartridge. Through its accurate media consisted of ion exchange-based resin, FCCST2 reduces calcium, magnesium and iron concentration. In case your feed water contains a high concentration of suspended matter. The softening effect takes place within the filter without adding any salt or chemicals into the water. The filter removes harmful substances and reduce limescale, prolonging life-span of your home appliances such as washing machine or dishwasher and saving you money.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
High-Quality Water Filters
Transform your home's water quality with the Aquafilter Set of 3 Replacement Filters. These premium filters are designed to fit whole house water purifiers and softeners, providing you with clean and refreshing water for your entire household. Made from durable materials, these filters offer long-lasting performance and superior filtration capabilities.
Efficient Water Softening
Say goodbye to hard water issues with the Aquafilter Set of 3 Replacement Filters. Enjoy the benefits of softer, silkier water that is gentle on your skin and clothes. These filters are specially engineered to reduce minerals that cause water hardness, giving you a more enjoyable bathing and washing experience. With these filters, you can say hello to luxurious, softened water throughout your home.
Chlorine Reduction Technology
Experience the difference in water taste and smell with the Aquafilter Set of 3 Replacement Filters. Equipped with advanced chlorine reduction technology, these filters effectively remove chlorine and other impurities from your water supply. Enjoy fresher, cleaner water straight from your tap while also protecting your appliances and plumbing from the harmful effects of chlorine. Upgrade your water purification system with these filters and enjoy peace of mind knowing your water is safe and healthy for your family.
Improved Water Quality
Aquafilter brings you a set of 3 replacement filters for your whole house water purifier softener. These filters are specifically designed to reduce chlorine and other impurities, providing you with cleaner and healthier drinking water. Say goodbye to foul tastes and odors, and enjoy the benefits of fresh and purified water every day.
Chlorine Reduction
One of the key features of these replacement filters is their ability to effectively reduce chlorine levels in your water. Chlorine is commonly used as a disinfectant in municipal water supplies but can leave your water with a strong chemical taste and smell. With Aquafilter's filters, you can enjoy chlorine-free water that is safe for drinking, cooking, and bathing.
Water Softening
In addition to reducing chlorine, Aquafilter's replacement filters also work to soften your water. Hard water can leave behind mineral deposits on your appliances, dishes, and plumbing fixtures. By incorporating a water softening filter into your system, you can prevent these issues and prolong the life of your household items. Invest in Aquafilter's replacement filters and experience the difference in your water quality today.
Aquafilter 10'' Set of 3 Replacement Filters Whole House Water Purifier and Softener Set contains: FCPP5 Yarn string wound sediment Premium FCCBL activated carbon block cartridge FCPRA-C Coconut Shell GAC and Anti-Scale Water Filter Stage 1:Yarn sediment filter removes sand, rust, silt and other sediments up to 5 micron Stage 2Activated carbon block cartridge removes levels of Chlorine, Organic Compounds, Pesticides, Herbicides, Trihalomethanes and Volatile Organic Compounds (VOCs).
Additionally, the cation exchange based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean water. Stage 3The FCPRA-C filter cartridges require very little maintenance, no back-washing and no salt. Coconut shell activated carbon used in filter cartridges removes chlorine from water, solvents and aromatic hydrocarbons (improves the taste and odour) and compounds, phenol, benzene, and organic substances. FCPRA-C is equipped with a post-filter pad to prevent carbon from being washed out and to avoid blockage if high particulate is present.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Aquafilter TFC-75F RO membrane. RO membranes consists of many thin layers of porous, semi-permeable film wound around a central core. TFC-x series membranes are compatible with most RO systems available on the market. They effectively remove 96%-99% of suspended particles, most bacteria and viruses, VOCs (not smaller than 0.0001 μm) and even ions. All filtered impurities are flushed to drain. TFC-x series membranes improve overall quality of water. Keep in mind that the performance of the RO membranes depends on water temperature and applied pressure. Low temperature of influent water will affect (lower) membrane performance. Pressure has a similar effect. In such cases, booster pump is required. Aquafilter offers TFCx-F Reverse Osmosis (RO) membrane suitable for POU (Point of Use) installations. TFCx-F membranes consist of many thin layers of porous, semi-permeable film wounded around a central core. Its small pore size (0.0001 micron) allows TFCx-F acting as a barrier against suspended particles, most of bacteria and viruses, ions and VOC’s present in your tap water. Finally, all filtrate impurities are flushed to drain, ensuring a continuous and efficient supply of clean water. TFCx-F membranes are compatible with most RO systems present on the market.
Aquafilter TFC-50F RO membrane. RO membranes consists of many thin layers of porous, semi-permeable film wound around a central core. TFC-x series membranes are compatible with most RO systems available on the market. They effectively remove 96%-99% of suspended particles, most bacteria and viruses, VOCs (not smaller than 0.0001 μm) and even ions. All filtered impurities are flushed to drain. TFC-x series membranes improve overall quality of water. Keep in mind that the performance of the RO membranes depends on water temperature and applied pressure. Low temperature of influent water will affect (lower) membrane performance. Pressure has a similar effect. In such cases, booster pump is required. Aquafilter offers TFCx-F Reverse Osmosis (RO) membrane suitable for POU (Point of Use) installations. TFCx-F membranes consist of many thin layers of porous, semi-permeable film wounded around a central core. Its small pore size (0.0001 micron) allows TFCx-F acting as a barrier against suspended particles, most of bacteria and viruses, ions and VOC’s present in your tap water. Finally, all filtrate impurities are flushed to drain, ensuring a continuous and efficient supply of clean water. TFCx-F membranes are compatible with most RO systems present on the market.
Aquafilter TFC-75F RO membrane. RO membranes consists of many thin layers of porous, semi-permeable film wound around a central core. TFC-x series membranes are compatible with most RO systems available on the market. They effectively remove 96%-99% of suspended particles, most bacteria and viruses, VOCs (not smaller than 0.0001 μm) and even ions. All filtered impurities are flushed to drain. TFC-x series membranes improve overall quality of water. Keep in mind that the performance of the RO membranes depends on water temperature and applied pressure. Low temperature of influent water will affect (lower) membrane performance. Pressure has a similar effect. In such cases, booster pump is required. Aquafilter offers TFCx-F Reverse Osmosis (RO) membrane suitable for POU (Point of Use) installations. TFCx-F membranes consist of many thin layers of porous, semi-permeable film wounded around a central core. Its small pore size (0.0001 micron) allows TFCx-F acting as a barrier against suspended particles, most of bacteria and viruses, ions and VOC’s present in your tap water. Finally, all filtrate impurities are flushed to drain, ensuring a continuous and efficient supply of clean water. TFCx-F membranes are compatible with most RO systems present on the market.
Aquafilter TLCHF-2T In-line ultrafiltration membrane 0.01 micron cartridge 1/4" NPT. Compatible with most under-counter systems available on the market. Due to the small pore size (0,02 micron) in combination with its unique structure, which decreases from the outside to the inside, the membrane is capable of removing various contaminants such as: sand, silt, rust and other suspended impurities, most bacteria, and some viruses. Large sediment particles are blocked near the capillary surface (surface filtration) and smaller ones flow inside until they are captured by smaller pores (depth filtration). Unlike RO membranes, UF membranes are characterized by zero rejection ratio which in turn leads to quicker and more efficient delivery of clean water. Moreover hollow fiber UF membranes leave beneficial minerals intact. TLCHF-2TF is designed for cold potable water filtration. Aquafilter TLCHF-2TF Ultra filtration membrane. Fits most 1/4” water lines and requires no additional tools for installation.Specifications:
Size: 10" x 2"
Micron rating: 0.02 microns
Filter Life: 6-12 months
Max pressure: 3,5 bar
Min temp.: 2'C
Max temp.: 45'C
