Our collection includes filter housings from recognised manufacturers such as Aquafilter, Pentair, Ecosoft, Prism and Spectrum. With options ranging from standard 10-inch and 20-inch filter housings to high-capacity Big Blue and stainless steel models, you can find a suitable housing for your specific filtration requirements.
A quality water filter housing provides a secure enclosure for the filtration cartridge, helping maintain a reliable water supply while allowing straightforward cartridge replacement and routine maintenance.
Systems consist of Big Blue & filter housings to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housings are compatible with a 4 1/2” x 20" type cartridges widely available on the market. Filter housings consist of housing, sump and filter head with 1" brass inlet/outlet inserts. Heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.
System is equipped with either 20"Big Blue ®filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue® type cartridge
Product features:
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Easy to connect to cold water inlet
Easy to install, No Electricity, No Drain Required
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 20" type cartridges available on the marketHousings are NSF approved for structural integrity and material requirementsEasy to install with System SpecificationsManufactured from FDA CFR-21 compliant materialsMade in EU with High Performance Components
Specifications:
Housing: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 45°C (113°F)
Dimensions (H x W x L) HHBB10B: 720mm x 540mm x 220mm
Cartridge dimensions HHBB10B: 20" x 4 1/2" (508 mm x 115 mm)
System includes:
1 x metal platform
3 x big blue type filter housings (20")
2 x pressure gauges (inlet & outlet) with nickel extension to the pressure gauges
3 x antibacterial and antimicrobial filter centralizing ring
1 x full instructions
1 x wrench
Aquafilter HHBB10B Big Blue filter housing to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housing are compatible with a broad range of 4 1/2” x 10" (or 4 1/2" x 10") type cartridges widely available on the market. Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Filter heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.Systems include:
metal platform
3 x Big Blue type filter housings
2 x pressure gauges (inlet & outlet)
wrench
3 x antibacterial and antimicrobial filter centralizing ring
System is equipped with either 10" Big Blue filter housings in blue color, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue type cartridges.Features
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 10" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications
Blue sump: PP
Head filter: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2O-ring: NBR
Thread: 1" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 43ºC
Aquafilter offers HHBB20A 2-Stage Whole House Big Blue® filtration System suitable for POE (Point of use) installations. HHBB20A housings are compatible with a broad range of cartridge types available on the market. Additionally, pressure drop can be monitored through the two pressure gauges located in the inlet and outlet positions of the system besides the microbial protection conferred by blue colored-housings in sunny locations. Equipped with pressure relief valves and a rounded bottom which increases stress resistance, HHBB20A ensures a continuous supply of fresh and clean drinking water.
SYSTEM CONTENT & SPECIFICATIONS
Housing sumps and filter heads: FH20Bx_L
Pressure gauge and brass extension: KCGA-1 and KCGA-1-E2
Centralizing and o-rings: NI-412-CENT-GR-AB and OR-N-1524X57
Feed water connectors: FXCG1-B
Wrench for filter: FXWR1BB-BL
Installation instructions (English language)
System dimensions (Height x Width x Length): 720 x 380 x 220 mm
Cartridge dimensions (Height x Outer Diameter): 20 x 4 1/2 inches
Operating temperature range (water): 2 - 45 °C (35 – 113 °F)
Operating pressure: 6 bar (90 psi)
100% factory-assembled, leak tested and ready for installation
Aquafilter OR-H10-1 set bottom (blue) and top (black ) O-rings for filter housing: Top O-ring for filter housing: H10A, H10B, H10B-AB, H10C, H10D, H10K, H105.
Aquafilter HHBB10A Big Blue filter housing to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housing are compatible with a broad range of 4 1/2” x 10" type cartridges widely available on the market .Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Filter heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.Systems include:
metal platform
2 x Big Blue type filter housings
2 x pressure gauges (inlet & outlet)
wrench
2 x antibacterial and antimicrobial filter centralizing ring
System is equipped with either 10" Big Blue filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue type cartridges.Features :
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 10" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Blue sump: PP
Head filter: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Thread: 1" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 43ºC
10” in-line set Big Blue type: Big Blue type filter housing, with blue sump and pressure relief valve, mounting bracket with screws, wrench, bacteriostatic filter centralizing ring, instruction and colour box. Available with: 1", 1 1/4", 1 1/2" BSP connection. Head is equipped with pressure relief valve which enables release of air accumulated after cartridge replacement.Features:
High quality
NSF certified
FDA CFR Title 21 Compliance
Factory Tested
Domestic and commercial use
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Ideal for POE use
Equipped with filter bracket, wrench and pressure gauge
Equipped with antibacterial and antimicrobial filter centralizing ring
Full flow 1” ports
Made in EU with High Performance
Components
Specifications:
Housing: PP
Cap: PP
Pressure relief valve: brass
O-ring: NBR
Thread: 1" BSP
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 43°C
Aquafilter FHPR34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B1-AQ filter housing consist of a transparent sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR34-B1-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter FHPRN34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN34-B1-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN34-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 3/4” BSP ports- Made in EU with High Performance Components
Aquafilter FHPR1-HP1 1" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR1-HP1 1" BSP housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR1-HP1 1" BSP filter housing consist of a transparent sump and head with 1” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR1-HP1 housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1" BSPMaximum Pressure: 10 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 45°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 1” BSP ports
Made in EU with High Performance Components
Aquafilter Filter Housing FHPRCL12-B-TRIPLE 1/2" BSP
This high-quality Aquafilter filter housing is perfect for both residential and industry use. Designed to accommodate a triple 1/2" BSP filter configuration, this housing ensures efficient water filtration for a variety of applications.
Premium Filtration for Clean Water
With the Aquafilter Filter Housing FHPRCL12-B-TRIPLE, you can trust that your water is clean and safe for drinking, cooking, and other uses. The durable construction of this housing is built to withstand daily use and provide reliable filtration performance.
Easy Installation and Maintenance
Installing and maintaining this filter housing is a breeze, thanks to its user-friendly design. Whether you're a homeowner looking to improve your water quality or a business owner in need of a dependable filtration solution, this Aquafilter housing is an excellent choice.
Aquafilter NI-212-CENT-GR-AB antibacterial filter cartridge centralizing ring.This product centralizes the filter cartridge inside its housing, reduces the risk of damage to the cartridge and housing elements at installation, and ensures seal tightness of the housing head - all while protecting your filter from bacteria and other microorganisms, thanks to new nanosilver technology.Features:
Competitive Pricing
Improves ease of cartridge installation
Increases ease of correct installation
Ensures proper vertical position of cartridge within housing
Stabilizes and centralizes cartridge for equal water distribution
Removes risk of bacteria
BACINIX nanosilver technology, providing antibacterial and antimicrobial protection
Centralizers inhibit harmful growth of bacteria, fungi and molds by using nanosilver BACINIX technology
Reduces risk of dislodging cartridge
Protects cartridge from faults due to poor positioning
Facilitates consistently correct cartridge installation
Made in the EU with High Quality materials
Aquafilter brass extension for KCGA-1 pressure gauge. Allows proper installation of the pressure gauge on H10C, HB1B, HB1D, HB1C, HB2B, HB2D, HB2C, H105 series housing.
FHPR34-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR34-B-AQ housings can be mounted individually or connected in a seriesSpecifications:
Blue sump: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
O-ring: NBR
Number of o-rings: 2
Thread: 3/4" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum temperature: 2ºC
Maximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter FHPRN12-B1-AQ 1/2" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN12-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN12-B1-AQ filter housing consist of a blue sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN12-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 1/2” BSP ports- Made in EU with High Performance Components
Filter housing brackets allow for housings to be attached in a fixed location which facilitates easy installation, maintenance and on-going filter change. Double and Triple brackets offer the solution for multiple housing connections. Bracket kits include appropriate screws for quick installation.
Three-pieces line (head-nut-bowl) are designed for water purification for residential and commercial applications. The bowl is made of PET material, which guarantees reliability and durability. They are equipped with a plastic breather valve.
Technical specifications
Materials: bowl: polyethylene (PET); head - polypropalene (PP) with brass connection units
Clamping: threaded
O-ring: EPDM
Max. working pressure: 8 bar
Max. working temperature: from 5°C (41°F) to 50°C (122°F)
Bracketing: horizontal
Connection: screw thread in inch
Package: empty housing without filter cartridge
Aquafilter filter housing FHPRN34-B-TWIN 3/4" BSP two stage system with two blue filter heads with 3/4" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN34-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Three-pieces line (head-nut-bowl) are designed for water purification for residential and commercial applications. The bowl is made of PET material, which guarantees reliability and durability. They are equipped with a plastic breather valve.
Technical specifications
Materials: bowl: polyethylene (PET); head - polypropalene (PP) with brass connection units
Clamping: threaded
O-ring: EPDM
Max. working pressure: 8 bar
Max. working temperature: from 5°C (41°F) to 50°C (122°F)
Bracketing: horizontal
Connection: screw thread in inch
Package: empty housing without filter cartridge
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for Ø 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Simplify the upkeep of your water filtration system with the PRBUTTON: PENTAIR Pressure Release Button Kit, an essential spare part designed for seamless compatibility with Pentair 2G housings. This pressure release button plays a crucial role in maintaining system performance and ensuring safe, hassle-free filter maintenance.
Key Features & Benefits
Perfect Compatibility: Specifically designed as a spare part for Pentair 2G housings, ensuring an exact fit for reliable performance.
Pressure Management: The pressure release button allows you to safely release pressure within the housing, making filter changes quick and stress-free.
Ease of Use: Simple to install and operate, it’s a practical addition for both routine maintenance and unexpected repairs.
System Protection: Helps maintain the integrity of your filtration system, extending its lifespan by promoting safe maintenance practices.
The PRBUTTON: PENTAIR Pressure Release Button Kit is a small yet vital component that supports the efficiency and longevity of your water filter housing.
The Ecosoft Big Blue 4.5"x20" in-line filter housing offers extended filtration performance. Perfect for large households or industrial pre-treatment setups using standard 20" cartridges.
High-volume filter housing
Compatible with 4.5"x20" cartridges
Designed for high flow applications
1" threaded ports with mounting bracket
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for Ø 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Standard Filter Housings are manufactured of a durable polypropylene or clear Styrene-Acrylonitrile (SAN). All are equipped with 3/4" NPT inlet and outlet ports. Standard Filter Housings are available in both 10" and 20" lengths and will accommodate a wide range of 2-1/2" to 2-7/8" diameter cartridges. The reinforced polypropylene cap offers an optional pressure relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges.Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps offer on-site examination of the cartridge.Opaque Standard Filter Housings are moulded from rugged reinforced polypropylene. They offer outstanding chemical compatibility and are ideal for use in a variety of low-flow applications.Clear Standard Filter Housings offer on-site examination of flow, performance, and cartridge life. They are ideal for a variety of applications.Features, Options, & Benefits
Ideal for a wide range of applications, including residential, commercial and industrial
Available in 10" and 20" lengths
Optional pressure relief/bleed button on inlet side of cap
Thick walls for increased strength
Leak-proof sealing with top-seated Buna-N O-ring
Available with clear or opaque sumps
Specifications
Housing - Polypropylene (opaque) or Styrene Acrylonitrile (clear)
Cap - Reinforced polypropylene
Button Assembly - 300-Series stainlesssteel, EPDM, and polypropylene
Temperature Rating - 4.4-51.7°C
Maximum Pressure - 125 psi (8.6 bar)
NSF CertificationsThe 150001, 150002, 150067, 150068, 150071, 150072, 150435 and 150436 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements.Part numbers: 150071, 150072, 150435, 150436, 150106, 150096
Ecosoft 10″ filter housing, 3/4″ connection is a practical and reliable choice for domestic water filtration. It is designed to hold sediment or carbon filter cartridges that reduce visible impurities and improve the taste, smell, and overall quality of tap water. Most commonly used in apartments, private homes, and other personal filtration setups, this housing fits seamlessly into standard systems. The 10″ size and 3/4″ threaded connection ensure easy installation and wide compatibility.
The housing supports popular cartridge formats like DOE, BIG, and COD3 offering flexibility for different water treatment needs. With durable construction and a user-friendly design, it helps extend the life of home appliances and plumbing by providing clean, filtered water for daily use.
Enlarged inlet for stable water flow and minimal pressure drop
Durable tip (2 mm) for precise alignment and tight sealing
Star-shaped head design improves internal water circulation
Compatible with DOE, BIG, and COD3 cartridges
Long-lasting and easy to install
Pentair Big Clear Filter Housings offer the versatility to meet all of your large capacity filtration needs, including high-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity, reducing the number of vessels required for high flow-rate applications. Sumps are available in both 10" and 20" lengths.Big Clear Filter Housings offer on-site examination of flow, performance, and cartridge life and are ideal for a variety of applications. The 1" polypropylene caps are available with a pressure-relief button on the inlet side to relieve pressure inside the housing and are available in 10" and 20" lengths.Caps are constructed of reinforced polypropylene. The 10" sumps are made of Lexan® and the 20" sumps are SAN (Styrene acrylonitrile)Features, Options, & Benefits
Large capacity housing suitable for high flow applications
Available in 10" and 20" lengths
Pressure relief/bleed on inlet side of cap
Accepts 4-1/2" diameter cartridges
Specifications
Housing - Styrene Acrylonitrile (clear)
Cap - Reinforced polypropylene
Button Assembly - 300-Series stainless-steel, EPDM, and polypropylene
Maximum Temperature - 38°C
•Maximum Pressure - 10": 6.9 bar, 20" 6.2 bar
Pentair Pentek 3G Standard Series Housings feature integral brackets, 20" clear housings, and caps for differential pressure gauges. They accept standard double open end (DOE) and our O-ring sealing cartridges. The O-ring design offers enhanced cartridge sealing for critical cartridge applications.3G Standard Filter Housings are manufactured from durable polypropylene or clear Styrene-Acrylonitrile (SAN). Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps are manufactured from Styrene-Acrylonitrile (SAN). They offer on-site examination of the cartridge and have excellent chemical compatibility.All are equipped with 3/4" BSP inlet and outlet ports. 3G Standard Filter Housings are available in 10" and 20" lengths and will accommodate a wide range of 2-1/4" to 3-1/8" diameter cartridges.Features, Options, & Benefits
Integral bracket and mounting boss cap version available
Available in 10" and 20" sumps in clear and opaque
Buttress threads and uniform walls for easier cartridge change and improved strength
Accepts CG o-ring sealing cartridges as well as standard DOE cartridges
Optional pressure-relief/bleed button and differential pressure gauge
Leak-proof sealing with top-seated floating Buna-N O-ring
Specifications
Housing - Polypropylene (opaque) or Styrene Acrylonitrile (clear)
Cap - Reinforced polypropylene
Button Assembly - 300-Series stainless-steel, EPDM, and polypropylene
Temperature Rating - 4.4-51.7°C
Maximum Pressure - 125 psi (8.6 bar)
Explore GroAqua's extensive range of water filter housings, designed to accommodate replacement filter cartridges across a wide variety of water treatment applications. Whether you're installing a new filtration system, upgrading an existing setup or replacing an old filter housing, we offer reliable solutions for domestic, commercial and industrial water filtration.
Our collection includes filter housings from recognised manufacturers such as Aquafilter, Pentair, Ecosoft, Prism and Spectrum. With options ranging from standard 10-inch and 20-inch filter housings to high-capacity Big Blue and stainless steel models, you can find a suitable housing for your specific filtration requirements.
A quality water filter housing provides a secure enclosure for the filtration cartridge, helping maintain a reliable water supply while allowing straightforward cartridge replacement and routine maintenance.
Explore Our Range of Water Filter Housings
We offer different housing configurations to suit various installation requirements, operating conditions and filtration capacities.
10-Inch Water Filter Housings
10-inch filter housings are widely used in domestic and light commercial water filtration systems. Compatible with standard 2.5-inch diameter filter cartridges, they provide a practical solution for sediment filtration, activated carbon filtration and specialist water treatment applications.
20-Inch Water Filter Housings
20-inch filter housings offer greater cartridge capacity and filtration surface area compared with standard 10-inch models. They are suitable for applications requiring higher flow rates, increased dirt-holding capacity or longer cartridge service intervals, depending on the filtration media used.
Big Blue Water Filter Housings
Big Blue filter housings are designed for larger 4.5-inch diameter cartridges and are commonly used in whole-house, commercial and industrial water treatment systems. Their larger capacity makes them suitable for applications requiring higher water flow and greater filtration capacity.
Stainless Steel Filter Housings
Stainless steel filter housings provide a robust solution for demanding water filtration environments. Available in different configurations, they are suitable for commercial and industrial applications where durability, operating conditions and material compatibility are important considerations.
Multi-Stage Filter Housing Systems
Multi-stage filter housing assemblies combine two or more housings to accommodate different filtration cartridges in sequence. These systems allow multiple treatment stages, such as sediment removal followed by activated carbon filtration, within a single installation.
Filter Housing Accessories and Replacement Parts
Maintain your filtration equipment with our selection of compatible housing accessories and replacement components, including mounting brackets, O-rings, housing spanners, pressure gauges, pressure relief valves and cartridge centralising rings.
Applications of Water Filter Housings
Our filter housings are suitable for a wide range of water filtration and treatment applications, including:
Domestic drinking water filtration.
Whole-house water filtration systems.
Under-sink water filtration installations.
Commercial water purification.
Industrial process water filtration.
Pre-filtration for reverse osmosis systems.
Sediment and particulate removal.
Activated carbon and chlorine reduction systems.
Water treatment equipment installations.
Filter housings can be installed individually or connected in series to accommodate different filtration stages and treatment requirements.
How to Choose the Right Water Filter Housing
Selecting the correct filter housing is essential for achieving reliable filtration performance and maintaining system compatibility.
Before choosing a housing, consider the following factors:
Cartridge dimensions: Check the required cartridge length and diameter, such as 10-inch, 20-inch or Big Blue.
Connection size: Select compatible inlet and outlet connections, including ½-inch, ¾-inch, 1-inch or larger BSP/NPT ports.
Operating pressure: Ensure the housing is rated for the maximum working pressure of your water supply.
Flow rate: Choose a housing that accommodates the required water flow without unnecessarily restricting system performance.
Operating temperature: Check that the housing materials are suitable for the application temperature.
Material compatibility: Consider the housing construction materials and their suitability for the water being treated.
Always check the manufacturer's specifications to ensure the selected housing is appropriate for your installation.
Why Choose GroAqua for Water Filter Housings?
At GroAqua, we supply water filtration equipment from established manufacturers, helping customers find reliable components for a wide range of water treatment applications.
Extensive selection of water filter housings.
Standard 10-inch and 20-inch filter housing options.
High-capacity Big Blue filter housings.
Stainless steel filtration housings.
Single, double and triple housing configurations.
Compatible housing accessories and replacement components.
Products from recognised filtration brands, including Aquafilter, Pentair and Ecosoft.
Solutions for domestic, commercial and industrial water filtration.
Shop Water Filter Housings at GroAqua
Whether you need a standard replacement filter housing for a domestic water filtration system or a high-capacity Big Blue housing for a commercial installation, explore the GroAqua collection to find the right solution.
Browse our range of water filter housings, multi-stage assemblies and housing accessories to build, maintain or upgrade your water filtration system.
Need help selecting a compatible housing? Contact the GroAqua team for assistance with cartridge dimensions, connection sizes, operating pressures and technical specifications.
