The Aquafilter FCCBL-G is a 10-inch Gold Series activated carbon block water filter cartridge designed to reduce chlorine, selected organic compounds and unwanted tastes and odours in drinking water.

Combining bituminous activated carbon, NSF-approved coconut shell activated carbon and zeolite, this multi-media carbon block cartridge provides effective water filtration for compatible domestic and commercial systems.

Designed for standard 10-inch slimline filter housings, the FCCBL-G is suitable for point-of-use (POU) and point-of-entry (POE) installations where improved water taste, odour and chlorine reduction are required.

Gold Series multi-media carbon filtration

The FCCBL-G combines three filtration materials to support water treatment:

• Bituminous activated carbon: Provides adsorption capacity for chlorine and selected organic contaminants.

• Coconut shell activated carbon: Offers additional adsorption capacity to help reduce substances affecting water taste and odour.

• Zeolite: An additional filtration medium incorporated into the Gold Series blend.

The combination of these materials provides a multi-media carbon block designed to improve drinking water quality.

Chlorine, taste and odour reduction

Chlorine is commonly used to disinfect mains water supplies, but it can contribute to unpleasant tastes and smells.

The Aquafilter FCCBL-G is designed to help reduce chlorine and selected organic compounds, improving the taste and odour of filtered water.

Its carbon block construction also provides filtration of selected suspended particles, making it suitable for use in multi-stage water filtration systems.

Suitable applications

The Aquafilter FCCBL-G can be used in compatible filtration systems for:

• Reducing chlorine in mains water.

• Improving unpleasant water tastes and odours.

• Reducing selected organic compounds.

• Supporting the reduction of selected volatile organic compounds (VOCs).

• Domestic drinking water filtration.

• Under-sink water filtration systems.

• Point-of-use (POU) filtration installations.

• Point-of-entry (POE) water treatment systems.

• Compatible reverse osmosis pre-filtration systems.

Technical specifications

• Brand: Aquafilter

• Model: FCCBL-G

• Series: Gold Series

• Cartridge type: Activated carbon block

• Media: Bituminous activated carbon, NSF-approved coconut shell activated carbon and zeolite

• Cartridge size: 10" × 2.5"

• Length: Approximately 9 7/8" (250 mm)

• Diameter: Approximately 2.5" (69 mm)

• Nominal flow rate: 3.8 litres per minute

• Performance: Excellent chlorine reduction and medium sediment filtration

• Recommended replacement interval: 3–6 months, depending on water quality and usage

• Maximum operating pressure: 6 bar

• Minimum water temperature: 2°C

• Maximum water temperature: Confirm against the current FCCBL-G manufacturer specification before publishing

• End configuration: Double Open Ended (DOE)

Installation and cartridge replacement

Install the Aquafilter FCCBL-G in a compatible 10-inch slimline filter housing. Check the dimensions of your existing housing before ordering, as this cartridge has a standard diameter of approximately 2.5 inches and is not suitable for 10-inch Big Blue housings.

For best results:

1. Check that the cartridge is compatible with your filter housing.

2. Install it according to the housing manufacturer's instructions.

3. Flush the new cartridge until the water runs clear.

4. Replace the cartridge regularly, typically every 3–6 months, depending on water quality and consumption.

Actual cartridge service life depends on incoming water quality, chlorine concentration, flow rate and total water consumption.

Important: This cartridge is designed for potable water filtration. It should not be used as the sole treatment for microbiologically unsafe water. Adequate disinfection is required where necessary.