The Aquada 2/4 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 2/4 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 2/4 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 2/4 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 2/4 replacement lamp:
Safe and effective: The Aquada 2/4 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 2/4 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 2/4 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 2/4 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1845
Wavelength: 254 nm
Power output: 45 watts
Lifespan: Up to 10,000 hours
The Aquada 2/4 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 2/4 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 2/4 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 2/4 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 2/4 replacement lamp:
Safe and effective: The Aquada 2/4 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 2/4 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 2/4 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 2/4 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1845
Wavelength: 254 nm
Power output: 45 watts
Lifespan: Up to 10,000 hours
This quartz sleeve offers a reliable fit for Wedeco Aquada 2/4 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 2/4 Altima, Proxima and Maxima systems.
Please note that the o-ring is not included
The NLR1845WS is a 40W UV lamp that fits in the Wedeco Aquada Altima, Maxima and Proxima type 2 or type 4 systems. So if you have any Aquada 2 or Aquada 4 this is the lamp you need.
The NLR1845WS UV lamp is made from high quality materials and measures in at 525mm in length. It will last 1 year before it needs replacing. We keep plenty of these available from stock as they're such a popular lamp.
UV lamps contain Mercury so need to be disposed of at your local recycling centre.
The Aquada 7/10 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 7/10 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 7/10 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 7/10 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 7/10 replacement lamp:
Safe and effective: The Aquada 7/10 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 7/10 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 7/10 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 7/10 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1880
Wavelength: 254 nm
Power output: 75 watts
Lifespan: Up to 10,000 hours
The Aquada 7/10 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 7/10 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 7/10 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 7/10 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 7/10 replacement lamp:
Safe and effective: The Aquada 7/10 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 7/10 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 7/10 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 7/10 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1880
Wavelength: 254 nm
Power output: 75 watts
Lifespan: Up to 10,000 hours
The Aquada 1 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 1 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 1 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 1 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 1 replacement lamp:
Safe and effective: The Aquada 1 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 1 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 1 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 1 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1825
Wavelength: 254 nm
Power output: 25 watts
Lifespan: Up to 10,000 hours
UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 1 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 1 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 1 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms.
Here are some of the benefits of using the Aquada 1 replacement lamp:
Safe and effective: The Aquada 1 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 1 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 1 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 1 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1825
Wavelength: 254 nm
Power output: 25 watts
Lifespan: Up to 10,000 hours
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This quartz sleeve offers a reliable fit for Wedeco Aquada 7/10 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 7/10 Altima, Proxima and Maxima systems
This 85W UV unit with full WRAS approval is ideal for commercial and light industrial applications. They're great for multi-residency water treatment plants, building services and process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 225l/min or 13.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This quartz sleeve offers a reliable fit for Wedeco Aquada 1 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 1 Altima, Proxima and Maxima systems.
The NLR1880WS is an 80W UV lamp and goes in to a Wedeco Aquada system that is a type 7 or 10 variant. These are a high quality UV bulb that will last 1 year before it needs replacing. We keep plenty of these available from stock as they're such a popular lamp as well.
UV lamps contain Mercury so need to be disposed of at your local recycling centre.
The NLR1825WS is a 25W UV lamp and goes in to a Wedeco Aquada Altima, Maxima or Proxima system that is a type 1. It's a high quality UV bulb that will last 1 year before it needs replacing. We keep plenty of these available from stock as they're such a popular lamp as well.
Please note that you'll only receive the parts in the option you select (so you won't get a quartz sleeve included if you choose "lamp only"). The quartz sleeve includes the O-ring at no extra charge.
UV lamps contain Mercury so need to be disposed of at your local recycling centre.
This quartz sleeve offers a reliable fit for Wedeco Aquada 2/4 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 2/4 Altima, Proxima and Maxima systems.
Please note that the o-ring is not included
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for family homes with more than 4 bedrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 75l/min or 4.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This quartz sleeve offers a reliable fit for Wedeco Aquada 7/10 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 7/10 Altima, Proxima and Maxima systems
This 55W UV unit with full WRAS approval is ideal for family homes with more than 4 bedrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 75l/min or 4.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 85W UV unit with full WRAS approval is ideal for light commercial and some bespoke industrial applications. They're great for multi-residency water treatment plants, building services and smaller process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 150l/min or 9.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This 25W UV unit with full WRAS approval is ideal for 1-3 bedroom homes with no more than 1 bathroom. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 1m³/hour and are fine to be left turned on for long periods (overnight for example).
This system comes with everything you need to fit and run the system for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
This quartz sleeve offers a reliable fit for Wedeco Aquada 1 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 1 Altima, Proxima and Maxima systems.
