Aquarium Chillers

Shop aquarium water chillers from TECO and Hailea at GroAqua. Designed to help maintain stable water temperatures, our range includes compact chillers for smaller aquariums, powerful cooling units for larger marine and freshwater systems, and commercial water chillers for demanding applications.

Choose from dedicated cooling models and combination chiller/heaters, with options for different aquarium capacities and water flow rates. Compare cooling capacity, recommended flow rate, power consumption and installation requirements to find the right aquarium chiller for your system.


  • Hailea Water Chiller HC100A 100 Litre Water Cooling Capacity 240V~50Hz Aquarium Chiller Hailea

    enviro Hailea HC-100A Water Chiller – 100L Aquarium & Hydroponic Cooling

    Keep aquarium water and hydroponic nutrient solutions at a more stable temperature with the Hailea HC-100A Water Chiller. Designed for systems with a recommended cooling capacity of up to 100 litres, this compact chiller provides electronically controlled water cooling for aquariums and hydroponic reservoirs. The HC-100A features a durable metal chassis, a digital temperature display and a corrosion-resistant titanium heat exchanger. It uses R134a refrigerant and is designed for continuous operation, making it a practical choice for maintaining controlled water temperatures in suitable freshwater, saltwater and hydroponic systems. Precise digital temperature control The electronic temperature controller allows you to set and monitor the water temperature, with the digital display showing adjustments in 0.1°C increments. This makes it easier to monitor your system and maintain a consistent temperature setting. The chiller can operate down to approximately 4°C, subject to operating conditions and the requirements of the connected system. Suitable for aquariums and hydroponics The Hailea HC-100A is designed for smaller water-cooling applications, including: Freshwater and marine aquariums Hydroponic nutrient reservoirs Water circulation systems requiring controlled cooling Other compatible small-volume water systems Its titanium heat exchanger is suitable for use with freshwater and saltwater applications. The recommended cooling capacity is approximately 100 litres, although actual cooling performance depends on ambient temperature, starting water temperature, installation conditions and the heat entering the system. Key features Suitable for aquariums and hydroponic systems Recommended water capacity: up to 100 litres Digital temperature controller and display Temperature adjustment in 0.1°C increments Titanium heat exchanger R134a refrigerant Robust metal construction Designed for continuous operation Automatic restart after a power interruption Compact design with fittings included Technical specifications Specification Details Brand Hailea Model HC-100A Recommended water capacity Up to 100 litres Refrigeration capacity 1/20 HP Recommended water flow rate 200–1,000 litres per hour Refrigerant R134a Power supply 220–240V Frequency 50Hz Connector size 13mm Heat exchanger Titanium Dimensions 338 × 218 × 325mm Weight Approximately 9.2kg Temperature display Digital, 0.1°C increments Installation and operation The HC-100A operates as part of a circulating water system and requires a suitable external pump to move water through the chiller. Select a pump and plumbing arrangement that provide a flow rate within the recommended 200–1,000 litres per hour range. Allow sufficient ventilation around the unit and install it in a location where warm air can disperse freely. Cooling performance depends on the surrounding temperature, water volume, pump selection, circulation system and other sources of heat. Please note: The HC-100A is designed for water systems of approximately 100 litres. It is not a one-size-fits-all solution for larger aquariums or reservoirs. For larger systems, consider a higher-capacity model from the Hailea HC range.

    $537.00

  • Hailea Water Chiller HC150A 150 Litre Water Cooling Capacity 240V~50Hz Aquarium Chiller Hailea

    enviro Hailea HC-150A Water Chiller – 150L Aquarium & Hydroponic Cooling

    Keep aquarium water and hydroponic nutrient solutions at a controlled temperature with the Hailea HC-150A Water Chiller. Designed for water systems with a recommended capacity of approximately 150 litres, this compact refrigeration unit provides reliable cooling for aquariums, hydroponic reservoirs and other suitable circulating water systems. The HC-150A combines a robust metal housing, digital temperature control and a corrosion-resistant titanium heat exchanger. It uses R134a refrigerant and is suitable for freshwater and saltwater applications, making it a versatile cooling solution for aquarium and hydroponic setups. Digital temperature control The Hailea HC-150A features an electronic temperature controller with a digital display for monitoring and adjusting water temperature. The display provides readings in 0.1°C increments, helping you keep track of temperature changes in your system. The chiller can operate at temperatures as low as approximately 4°C, depending on the installation and operating conditions. Titanium heat exchanger for freshwater and saltwater The HC-150A incorporates a titanium heat exchanger designed to resist corrosion when used with freshwater or saltwater. This makes it suitable for a range of aquarium applications, including marine systems. It can also be used to cool hydroponic nutrient reservoirs, helping growers manage solution temperatures. Designed for systems up to 150 litres The HC-150A is recommended for water systems with a capacity of approximately 150 litres. Its cooling performance depends on factors such as ambient temperature, starting water temperature, circulation rate, lighting, pumps and other heat sources. Manufacturer testing indicates that the unit can cool 150 litres of water from 28°C to 16°C over 20 hours under specified test conditions. A larger 300-litre volume reached 22°C under the same stated test conditions. Actual results will vary with the installation. Key features Suitable for aquariums and hydroponic systems Recommended system capacity: approximately 150 litres Digital temperature display Display precision: 0.1°C increments Titanium heat exchanger for freshwater and saltwater use R134a refrigerant Compressor rating: 1/10 HP Designed for continuous operation Automatic restart following a power interruption Robust metal housing Includes connection fittings Technical specifications Specification Details Brand Hailea Model HC-150A Recommended system capacity Approximately 150 litres Compressor rating 1/10 HP Recommended water flow rate 250–1,200 litres per hour Refrigerant R134a Power supply 220–240V Frequency 50Hz Working current 1.1A Heat exchanger Titanium Temperature display Digital, 0.1°C increments Dimensions 420 × 248 × 365mm Weight Approximately 15kg Connections Check supplied fittings and connection sizes Installation and operation The Hailea HC-150A requires an external water pump to circulate water through the chiller. Select a suitable pump capable of delivering a flow rate within the recommended 250–1,200 litres per hour range. Install the chiller in a well-ventilated location, allowing sufficient space around the unit for heat dissipation. Avoid placing it in an enclosed area where warm air can accumulate, as this can reduce cooling efficiency. For best results, consider the total water volume, ambient temperature, lighting, pump heat and other equipment that may increase the temperature of your system. Please note: The 150-litre capacity is a recommended system size rather than a guaranteed cooling result in every environment. If you need to cool a larger aquarium or reservoir, consider a higher-capacity model from the Hailea HC range.

    $518.00

  • Hailea Water Chiller HC300A 300 Litre Water Cooling Capacity 240V~50Hz Aquarium Chiller Hailea

    enviro Hailea HC-300A Water Chiller – 300L Aquarium & Hydroponic Cooling

    Keep aquarium water and hydroponic nutrient solutions at a controlled temperature with the Hailea HC-300A Water Chiller. Designed for circulating water systems with a recommended capacity of approximately 300 litres, this refrigeration unit provides effective cooling for larger aquariums, hydroponic reservoirs and other compatible water systems. The HC-300A features a robust metal housing, digital temperature control and a corrosion-resistant titanium heat exchanger. Using R134a refrigerant, it is suitable for freshwater and saltwater applications, making it a versatile cooling solution for aquarium and hydroponic installations. Digital temperature control The Hailea HC-300A features an electronic temperature controller and digital display, allowing you to monitor and adjust your system's water temperature. The display provides readings in 0.1°C increments. The unit can operate at temperatures as low as approximately 4°C, depending on operating conditions and the cooling requirements of the installation. Titanium heat exchanger for freshwater and saltwater The HC-300A incorporates a titanium heat exchanger designed to resist corrosion in freshwater and saltwater applications. This makes it suitable for marine and freshwater aquariums, as well as hydroponic nutrient reservoirs. Designed for water systems up to approximately 300 litres The HC-300A is recommended for systems with a water capacity of around 300 litres. Its cooling performance depends on factors including ambient temperature, starting water temperature, circulation rate, lighting, pumps and other sources of heat. Manufacturer performance testing uses an ambient temperature of 30°C, an initial water temperature of 28°C and a target temperature of 16°C. The stated test volume for the HC-300A is 300 litres, with a cooling period of 20 hours. Actual results will vary with installation conditions and heat load. Key features Suitable for aquariums and hydroponic systems Recommended system capacity: approximately 300 litres Digital temperature display Display precision: 0.1°C increments Titanium heat exchanger for freshwater and saltwater use R134a refrigerant Compressor rating: 1/4 HP Recommended water flow: 1,000–2,500 litres per hour Robust metal construction Designed for continuous operation Automatic restart after a power interruption Connection fittings included Technical specifications Specification Details Brand Hailea Model HC-300A Recommended system capacity Approximately 300 litres Compressor rating 1/4 HP Recommended water flow rate 1,000–2,500 litres per hour Power supply 220–240V Frequency 50Hz Working current 1.8A Refrigerant R134a Refrigerant charge 220g Heat exchanger Titanium Temperature display Digital, 0.1°C increments Dimensions 448 × 330 × 440mm Weight Approximately 18.6kg Water connections Check supplied fittings; commonly listed for 19mm and 25mm hose sizes Installation and operation The Hailea HC-300A requires an external water pump to circulate water through the cooling unit. Select a suitable pump capable of providing a flow rate within the recommended 1,000–2,500 litres per hour range. Install the chiller in a well-ventilated location, leaving sufficient space around the unit for heat dissipation. Avoid enclosing the chiller in a cabinet or placing it somewhere warm air cannot escape, as this can reduce cooling efficiency. For best results, consider the total water volume, ambient temperature, lighting, pump heat and other equipment that may increase the temperature of your system. Please note: The 300-litre capacity is a recommended system size based on specified test conditions, not a guarantee of identical cooling performance in every environment. For larger systems or higher heat loads, consider a higher-capacity model from the Hailea HC range.

    $657.00

  • Last stock! Hailea Water Chiller HC500A 500 Litre Water Cooling Capacity 240V~50Hz Aquarium Chiller Hailea

    enviro Hailea HC-500A Water Chiller – 500L Aquarium & Hydroponic Cooling

    Maintain controlled water temperatures in larger aquariums and hydroponic systems with the Hailea HC-500A Water Chiller. Designed for circulating water systems with a recommended capacity of approximately 500 litres, this powerful refrigeration unit helps manage water and nutrient solution temperatures in demanding installations. The HC-500A features a robust metal housing, digital temperature control and a corrosion-resistant titanium heat exchanger. Using R134a refrigerant and a 1/2 HP compressor, it provides an effective cooling solution for suitable freshwater, saltwater and hydroponic applications. Digital temperature control The Hailea HC-500A features an electronic temperature controller and digital display, allowing you to monitor and adjust your system's water temperature. The display provides readings in 0.1°C increments, making it easier to monitor temperature changes and maintain your chosen setting. The unit can operate at temperatures as low as approximately 4°C, depending on the installation and operating conditions. Titanium heat exchanger for freshwater and saltwater The HC-500A incorporates a titanium heat exchanger designed to resist corrosion in freshwater and saltwater applications. This makes it suitable for marine and freshwater aquariums, as well as hydroponic nutrient reservoirs. Designed for larger water systems The HC-500A is recommended for systems with a water capacity of approximately 500 litres. It is suitable for larger aquariums and hydroponic installations where maintaining a controlled water temperature is important. Manufacturer testing specifies cooling 500 litres of water from 28°C to 18°C over 20 hours, with an ambient temperature of 30°C. A separate test with 1,000 litres reached 23°C under the stated conditions. Actual cooling performance will vary depending on ambient temperature, water volume, circulation, lighting, pumps and other sources of heat. Key features Suitable for larger aquariums and hydroponic systems Recommended system capacity: approximately 500 litres 1/2 HP compressor Digital temperature display Display precision: 0.1°C increments Titanium heat exchanger for freshwater and saltwater use R134a refrigerant Recommended water flow: 1,200–3,000 litres per hour Robust metal construction Designed for continuous operation Automatic restart following a power interruption Includes connection fittings Technical specifications Specification Details Brand Hailea Model HC-500A Recommended system capacity Approximately 500 litres Compressor rating 1/2 HP Recommended water flow rate 1,200–3,000 litres per hour Power supply 220–240V Frequency 50Hz Working current 2.4A Refrigerant R134a Refrigerant charge 260g Heat exchanger Titanium Temperature display Digital, 0.1°C increments Dimensions 475 × 360 × 490mm Weight Approximately 22kg Water connections Check supplied fittings; commonly listed for 19mm and 25mm hose sizes Installation and operation The Hailea HC-500A requires an external water pump to circulate water through the chiller. Choose a suitable pump capable of delivering a flow rate within the recommended 1,200–3,000 litres per hour range. The pump and circulation system should be selected to suit the overall installation, including pipework, filters and other equipment. Ensure that the chiller receives an appropriate water flow during operation. Install the unit in a well-ventilated location, leaving sufficient space around it for heat dissipation. Avoid enclosing the chiller in a cabinet or placing it somewhere warm air cannot escape, as this can reduce cooling efficiency. For best results, consider the total water volume, ambient temperature, lighting, pump heat and other equipment that may increase the temperature of your system. Please note: The 500-litre capacity is a recommended system size based on specified test conditions, not a guarantee of identical cooling performance in every environment. Larger water volumes and higher heat loads may require a more powerful chiller.

    $878.00

  • Hailea Aquarium Chiller HC 1000A Aquarium Chiller Hailea

    enviro Hailea HC-1000A Water Chiller – 1,000L Aquarium & Hydroponic Cooling

    Maintain controlled water temperatures in large aquariums and hydroponic systems with the Hailea HC-1000A Water Chiller. Designed for demanding water-cooling applications, this powerful refrigeration unit is suitable for aquariums and circulating water systems with a recommended capacity of approximately 1,000 litres. The HC-1000A combines a robust steel chassis, digital temperature control and a corrosion-resistant titanium heat exchanger. Powered by a 1 HP compressor and using R134a refrigerant, it provides substantial cooling capacity for larger freshwater and saltwater aquariums, as well as compatible hydroponic reservoirs. Powerful 1 HP cooling performance The Hailea HC-1000A is designed for larger water systems where maintaining a stable temperature is important. Its 1 HP compressor provides considerably more cooling capacity than the smaller models in the Hailea HC range. Manufacturer testing specifies the following performance under controlled conditions: 1,000 litres of water cooled from 28°C to approximately 14–16°C over 20 hours. 2,000 litres of water cooled from 28°C to approximately 21–22°C over 20 hours. These results were recorded at an ambient temperature of 30°C. Actual performance will depend on installation conditions, water circulation, ambient temperature and the amount of heat entering the system. Digital temperature control The HC-1000A features an electronic temperature controller and digital display, allowing you to monitor and adjust the water temperature. Its microcomputer control system includes temperature memory, allowing the chiller to resume its previous operating settings after a power interruption. The unit also incorporates an automatic overcurrent protection system. Titanium heat exchanger for freshwater and saltwater The chiller uses an anti-corrosive titanium heat exchanger designed for both freshwater and saltwater applications. This makes it suitable for large marine and freshwater aquariums, as well as compatible hydroponic water-cooling installations. The robust steel housing is designed for long-term use in demanding environments. Suitable for large aquariums and hydroponic systems The HC-1000A is suitable for: Large freshwater aquariums Marine and saltwater aquariums Large hydroponic nutrient reservoirs Water-circulation systems requiring substantial cooling capacity Other compatible water-cooling applications Although commonly positioned as a 1,000-litre aquarium chiller, manufacturer testing also includes a 2,000-litre water volume. The achievable temperature depends on the total water volume and heat load. Key features High-capacity aquarium and hydroponic water chiller 1 HP compressor Recommended water flow rate: 1,500–4,000 litres per hour Digital temperature controller and display Titanium heat exchanger for freshwater and saltwater use R134a refrigerant Microcomputer control system Temperature memory following power interruption Automatic overcurrent protection Robust steel chassis Designed for larger water-cooling installations Technical specifications Specification Details Brand Hailea Model HC-1000A Compressor rating 1 HP Manufacturer-tested water volumes 1,000L and 2,000L Recommended water flow rate 1,500–4,000 litres per hour Power supply 220–240V Frequency 50Hz Working current 3.2A Refrigerant R134a Refrigerant charge Approximately 420–450g Heat exchanger Titanium Temperature control Digital electronic controller Temperature memory Yes Protection Automatic overcurrent protection Dimensions 520 × 400 × 480mm Weight Approximately 31.3kg Water connections 25mm or 32mm, depending on supplied fittings Installation and operation The Hailea HC-1000A requires an external water pump to circulate water through the cooling unit. Select a suitable pump and circulation arrangement capable of delivering a flow rate within the recommended 1,500–4,000 litres per hour range. The circulation system should be selected to suit the complete installation, including pipework, filters and other connected equipment. Ensure that adequate water flow is maintained through the chiller during operation. Install the unit in a well-ventilated location with sufficient clearance around the housing. The chiller releases heat into its surroundings, so restricted ventilation or an enclosed installation can reduce cooling efficiency. For reliable performance, consider the total water volume, ambient temperature, aquarium lighting, pump heat and other sources of heat entering the system. Please note: Cooling performance depends on operating conditions. The manufacturer's 1,000L and 2,000L test results were obtained under specified conditions and should not be treated as guaranteed temperatures for every installation. The unit also requires a suitable external circulation pump.

    $1,219.00

  • Teco TK500 Aquarium Chiller/Heater Aquarium Chiller Teco

    Teco Teco TK500 Aquarium Chiller (no heater)

    The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - Coefficient Of Performance and the lowest noise levels Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces. Unique Features Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi. Power supply Water temp Litres US Gallons COP*** 50Hz 25°C* 500 130 1,83 50Hz 8°C** 100 250 1,09 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt.** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt.*** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 240W R290 36,4 lb 10°C - 38°C ll data are approximate and may be changed without notice by TECO Technical Details  Supply    230V-50Hz  Cooling Power Consumption    240 w  Ecological Refrigerant    R290  Min and Max Flow Rate   500 l/h - 800 l/h  Tank Size    up to 500 l (water temp. 25°C - Room temp. 30°C - Heating load 0.5 w/l)  Dimensions (millimeters)    310 (w) x 310 (d) x 416 (h)  Dimensions (inches)    12.2 (w) x 12.2 (d) x 16.38 (h)  Weight    16.5 kg  Connections    fitting 3/4" - 16mm int. tube diameter

    $1,670.00

  • Teco TK1000EH Aquarium Chiller/Heater Aquarium Chiller Teco

    Teco Teco TK1000EH Aquarium Chiller/Heater

    The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces. Unique Features Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi. Power supply Water temp Liters US Gallons COP*** 50Hz 25°C* 1000 260 2,41 50Hz 8°C** 150 40 1,36 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 270W R290 43,4 lb 10°C - 38°C ll data are approximate and may be changed without notice by TECO Technical Details  Supply   230V-50Hz   Cooling Power Consumption    270 w  Ecological Refrigerant    R290  Min and Max Flow Rate    500 l/h - 800 l/h  Tank Size    up to 1000 l  (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)  Dimensions (millimeters)    310 (w) x 310 (d) x 458 (h)  Dimensions (inches)    12.2 (w) x 12.2 (d) x 18.03 (h)  Weight    19.7 kg  Connections    fitting 3/4" - 16mm int. tube diameter

    $2,367.00

  • Teco TK 150 Aquarium Chiller 150 litre Aquarium Chiller Teco

    Teco Teco TK 150 Aquarium Chiller 150 litre

    The exclusive use of internationally recognised high-performance compressors and of the titanium coaxial heat exchanger, ensures high performances. The set of technologies used allows you to decrease noise levels and achieve the highest COP-Coefficient Of Performance, contributing to significant energy savings. Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0,1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0,5 °C/0,5 °F. Displayed temperatures are in ° C or ° F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size, which makes the chiller ideal also for confined spaces. Unique Features The “TECObody-condenser system” represents another major achievement: besides performing its main function as an integral part of the structure, the condenser confers an exclusive and original design to the chiller. Moreover, it makes the use of the filter unnecessary, thus eliminating the cleaning problems normally associated with it. The heater cannot be installed in this model. Power supply Water temp. Liters US Gallons COP** 50Hz 25° C* 150 40 1,19 *The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.5 w/lt. **Coefficient of performance Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 210 W R134 26,9 lb 10°C - 38°C All data are approximate and may be changed without notice by TECO. Technical Details Supply    230V-50Hz   Cooling Power Consumption    150 w  Ecological Gas    R134a  Min. Flow Rate    400 l/h  Tank Size    up to 150 l (water temp. 25°C - Room temp. 30°C - Heating load 0.5 w/l)  Dimensions (millimeters)    215 (w) x 361 (d) x 315 (h)  Dimensions (inches)    8.46 (w) x 14.21 (d) x 12.4 (h)  Connections    fitting 1/2" - 12mm int. tube diameter

    $1,163.00

  • Teco TK2000EH Aquarium Chiller/Heater Aquarium Chiller Teco

    Teco Teco TK2000EH Aquarium Chiller/Heater

    The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces. Unique Features Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi. Power supply Water temp Liters US Gallons COP*** 50Hz 25°C* 2000 530 2,49 50Hz 8°C** 300 105 1,70 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 350W R290 47,2 lb 10°C - 38°C ll data are approximate and may be changed without notice by TECO Technical Details  Supply   230V-50Hz   Cooling Power Consumption    350 w  Ecological Refrigerant    R290  Min and Max Flow Rate    500 l/h - 800 l/h  Tank Size    up to 2000 l (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)  Dimensions (millimeters)    310 (w) x 310 (d) x 500 (h)  Dimensions (inches)    12.2 (w) x 12.2 (d) x 19.69 (h)  Weight    21.4 kg  Connections    fitting 3/4" - 16mm int. tube diameter

    $2,819.00

  • Teco TK500 Aquarium Chiller/Heater Aquarium Chiller Teco

    Teco Teco TK500 Aquarium Chiller/Heater

    The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - Coefficient Of Performance and the lowest noise levels Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces. Unique Features Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi. Power supply Water temp Liters US Gallons COP*** 50Hz 25°C* 500 130 1,83 50Hz 8°C** 100 250 1,09 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 240W R290 36,4 lb 10°C - 38°C ll data are approximate and may be changed without notice by TECO Technical Details  Supply    230V-50Hz  Cooling Power Consumption    240 w  Ecological Refrigerant    R290  Min and Max Flow Rate   500 l/h - 800 l/h  Tank Size    up to 500 l  (water temp. 25°C - Room temp. 30°C - Heating load 0.5 w/l)  Dimensions (millimeters)    310 (w) x 310 (d) x 416 (h)  Dimensions (inches)    12.2 (w) x 12.2 (d) x 16.38 (h)  Weight    16.5 kg  Connections    fitting 3/4" - 16mm int. tube diameter

    $1,847.00

  • Teco TK 6000 Aquarium Chiller 6,000 litre Commercial Chiller Teco

    Teco Teco TK 6000 Aquarium Chiller 6,000 litre

    The exclusive use of internationally recognised high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to remarkable energy savings. Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1 °C/0.2°F. The setting range is 5°C - 35°C (41°F - 95°F) and the temperature is kept constant with a maximum differential of 0.5°C/1°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller is characterized by a solid structure designed to provide a perfect protection against oxidation and it is therefore perfect to be used with salt water. Unique Features These units are also suitable for industrial applications. The maintenance of the air filter is quick and easy. These units have the option of up to 4 x 400W heaters to be fitted, please ask for pricing Water temp. Liters US Gallons COP** 25°C* 6000 1580 3 8°C** 1000 260 1,4 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt.** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt.*** Coefficient of performance. Power Suppl Power Consumption Gas Weight Ambient temperature 50Hz 900W R410A 88,2 lb 5°C - 38°C All data are approximate and may be changed without notice by TECO

    $8,231.00

  • Teco TK2000EH Aquarium Chiller/Heater Aquarium Chiller Teco

    Teco Teco TK2000E Aquarium Chiller (no heater)

    The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces. Unique Features Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi. Power supply Water temp Liters US Gallons COP*** 50Hz 25°C* 2000 530 2,49 50Hz 8°C** 300 105 1,70 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 350W R290 47,2 lb 10°C - 38°C ll data are approximate and may be changed without notice by TECO Technical Details  Supply   230V-50Hz   Cooling Power Consumption    350 w  Ecological Refrigerant    R290  Min and Max Flow Rate    500 l/h - 800 l/h  Tank Size    up to 2000 l (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)  Dimensions (millimeters)    310 (w) x 310 (d) x 500 (h)  Dimensions (inches)    12.2 (w) x 12.2 (d) x 19.69 (h)  Weight    21.4 kg  Connections    fitting 3/4" - 16mm int. tube diameter

    $2,641.00

  • Teco TK1000EH Aquarium Chiller/Heater Aquarium Chiller Teco

    Teco Teco TK1000E Aquarium Chiller (no heater)

    The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces. Unique Features Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi. Power supply Water temp Liters US Gallons COP*** 50Hz 25°C* 1000 260 2,41 50Hz 8°C** 150 40 1,36 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 270W R290 43,4 lb 10°C - 38°C ll data are approximate and may be changed without notice by TECO Technical Details  Supply   230V-50Hz   Cooling Power Consumption    270 w  Ecological Refrigerant    R290  Min and Max Flow Rate    500 l/h - 800 l/h  Tank Size    up to 1000 l  (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)  Dimensions (millimeters)    310 (w) x 310 (d) x 458 (h)  Dimensions (inches)    12.2 (w) x 12.2 (d) x 18.03 (h)  Weight    19.7 kg  Connections    fitting 3/4" - 16mm int. tube diameter

    $2,194.00

  • TK 9000 Aquarium Chiller 9,000 litre Commercial Chiller Teco

    Teco TK 9000 Aquarium Chiller 9,000 litre

    The exclusive use of internationally recognised high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to remarkable energy savings Digital Thermostat he setting of functions is intuitive and the temperature reading is accurate, resolution 0.1 °C/0.2°F. The setting range is 5°C - 35°C (41°F - 95°F) and the temperature is kept constant with a maximum differential of 0.5°C/1°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller is characterized by a solid structure designed to provide a perfect protection against oxidation and it is therefore perfect to be used with salt water. Unique Features These units are also suitable for industrial applications. The maintenance of the air filter is quick and easy. These units have the option of up to 4 x 400W heaters to be fitted, please ask for pricing Water temp. Liters US Gallons COP** 25°C* 9000 2370 2,6 8°C* 1800 470 1,4 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt.** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt.*** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 1200W R410A 104 lb 5°C - 38°C ll data are approximate and may be changed without notice by TECO. * Stripped cable

    $9,515.00

  • TECO TK 15K commercial heat pump 3-phase chiller/heater Commercial Chiller Teco

    Teco TECO TK 15K commercial heat pump 3-phase chiller/heater

    The exclusive use of internationally recognized, high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to significant energy savings. Digital Thermostat he setting of functions is intuitive and the temperature detection is accurate, resolution 0.5°C/1°F. The setting range is 5°-40°C (41°F-104°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential 2°C/5°F. Displayed temperature is in °C or °F and there are security alarms. Possibility to control remotely the display using supplied cable, degree of protection IPX4. Efficient Design The chiller is characterized by a solid structure, designed to provide a perfect oxidation protection and therefore perfect for use with salt water Unique Features These units are also suitable for industrial applications and outdoor installation. Vertical ventilation ensures optimal operation even when working in harsh environments. Water temp. Ambient temp. Working mode Cooling Capacity COP** 25°C* 38°C Cooling 14,6KW 2,1 * The values reported in the table refer to the following conditions: heating load of 0.5 w/lt.** Coefficient of performance Power Supply Power Consumption Gas Weight Ambient temperature 50Hz - 3ph 6890W R410A 286,6 lb 5°C - 38°C All data are approximate and may be changed without notice by TECO.

    $35,990.00

  • TECO TK 8K commercial heat pump 3-phase chiller/heater Commercial Chiller Teco

    Teco TECO TK 8K commercial heat pump 3-phase chiller/heater

    The exclusive use of internationally recognized, high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to significant energy savings. Digital Thermostat The setting of functions is intuitive and the temperature detection is accurate, resolution 0.5°C/1°F. The setting range is 5°-40°C (41°F-104°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential 2°C/5°F. Displayed temperature is in °C or °F and there are security alarms. Possibility to control remotely the display using supplied cable, degree of protection IPX4. Efficient Design The chiller is characterized by a solid structure, designed to provide a perfect oxidation protection and therefore perfect for use with salt water Unique Features These units are also suitable for industrial applications and outdoor installation. Vertical ventilation ensures optimal operation even when working in harsh environments. Water temp. Ambient temp. Working mode Cooling Capacity COP** 25°C* 38°C Cooling 8,7KW 2,1 * The values reported in the table refer to the following conditions: heating load of 0.5 w/lt.** Coefficient of performance Power Supply Power Consumption Gas Weight Ambient temperature 50Hz - 3ph 4350W R410A 231,49 lb 5°C - 38°C All data are approximate and may be changed without notice by TECO.

    $21,177.00

  • TECO TK 5K commercial heat pump chiller/heater Commercial Chiller Teco

    Teco TECO TK 5K commercial heat pump chiller/heater

    The exclusive use of internationally recognized, high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to significant energy savings. Digital Thermostat The setting of functions is intuitive and the temperature detection is accurate, resolution 0.5°C/1°F. The setting range is 5°-40°C (41°F-104°F) and there is a closed loop temperature control system with high accuracy and extremely tight differential 2°C/5°F. Displayed temperature is in °C or °F and there are security alarms. Possibility to control remotely the display using supplied cable, degree of protection IPX4. Efficient Design The chiller is characterized by a solid structure, designed to provide a perfect oxidation protection and therefore perfect for use with salt water. Unique Features These units are also suitable for industrial applications and outdoor installation. Vertical ventilation ensures optimal operation even when working in harsh environments. Water temp. Ambient temp. Working mode Cooling Capacity COP** 25°C* 38°C Cooling 5,8KW 2,8 * The values reported in the table refer to the following conditions: heating load of 0.5 w/lt.** Coefficient of performance Power Supply Power Consumption Gas Weight Ambient temperature 50Hz - 1ph 2030W R410A 174,17 lb 5°C - 38°C All data are approximate and may be changed without notice by TECO.

    $14,961.00

  • Teco TK 3000 Aquarium Chiller 3,000 litre Commercial Chiller Teco

    Teco Teco TK 3000 Aquarium Chiller 3,000 litre

    The exclusive use of internationally recognised high-performance rotary compressors and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allows you to decrease noise levels and achieve the highest COP - coefficient of performance - contributing to remarkable energy savings. Digital Thermostat The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1 °C/0.2°F. The setting range is 5°C - 35°C (41°F - 95°F) and the temperature is kept constant with a maximum differential of 0.5°C/1°F. Displayed temperature is in °C or °F and there are security alarms. Efficient Design The chiller is characterized by a solid structure designed to provide a perfect protection against oxidation and it is therefore perfect to be used with salt water. Unique Features These units are also suitable for industrial applications. The maintenance of the air filter is quick and easy. These units have the option of up to 4 x 400W heaters to be fitted, please ask for pricing Water temp. Liters US Gallons COP** 25°C* 3000 790 2,8 8°C** 500 210 1,4 * The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt.** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt.*** Coefficient of performance. Power Supply Power Consumption Gas Weight Ambient temperature 50Hz 800W R410A 86 lb 5°C - 38°C All data are approximate and may be changed without notice by TECO

    $6,188.00

Maintaining a stable water temperature is essential for a healthy aquarium. Excessive heat can place stress on fish, corals and other aquatic organisms, making reliable temperature control particularly important in marine aquariums, reef tanks and larger freshwater systems.

An aquarium chiller removes heat from circulating water, helping to maintain the temperature required by your aquatic environment. Whether you are cooling a small tropical aquarium, a large marine tank or a professional aquatic installation, selecting the correct chiller is important for consistent performance.

At GroAqua, we stock aquarium chillers from TECO and Hailea, with models covering a range of aquarium sizes, cooling capacities and water flow requirements. Our selection includes compact water chillers, larger-capacity cooling units, combination chiller/heaters and commercial chillers.

TECO Aquarium Chillers

TECO is recognised for its aquarium refrigeration technology, combining temperature control, efficient cooling and compact equipment design.

TECO aquarium chillers are designed for freshwater and marine applications, with selected models featuring titanium heat exchangers, digital temperature controls and corrosion-resistant construction.

Features available across selected TECO models include:

  • Digital thermostats for accurate temperature adjustment.

  • Titanium heat exchangers suitable for compatible freshwater and saltwater applications.

  • Refrigeration technology designed for efficient cooling.

  • Compact designs for installation where space is limited.

  • Temperature displays with Celsius and Fahrenheit options on selected models.

  • Safety alarms and automatic temperature control.

  • TECOair technology on selected models to improve airflow and heat dissipation.

  • Magnetic filters for convenient maintenance on selected models.

Some newer TECO models also support TECOnnect connectivity, allowing compatible equipment to integrate with the manufacturer's smart control system.

TECO offers different chiller capacities to suit aquariums ranging from smaller domestic tanks to larger professional installations. Check the individual model specifications to determine its suitability for your aquarium.

Hailea Aquarium Water Chillers

Hailea aquarium chillers provide water cooling options for freshwater aquariums, marine tanks and selected hydroponic systems.

The Hailea HC series includes compact units for smaller aquariums and larger models for installations requiring greater cooling capacity.

Depending on the model, features include:

  • Digital temperature displays.

  • Electronic temperature control.

  • Titanium heat exchangers for compatible freshwater and saltwater applications.

  • Metal chassis construction.

  • Refrigeration systems designed for continuous operation, subject to model specifications.

  • Different cooling capacities for a range of aquarium sizes.

Hailea models are available in different configurations, so it is important to compare their cooling output, recommended water flow and installation requirements before purchasing.

Aquarium Chillers for Marine and Reef Tanks

Marine aquariums and reef systems can be particularly sensitive to temperature fluctuations. Fish, corals and other invertebrates may be affected by prolonged periods of excessive heat, making dependable temperature management an important part of aquarium maintenance.

An aquarium chiller helps remove excess heat from the water and maintain a more consistent temperature.

A suitable marine aquarium chiller can help:

  • Maintain a stable water temperature during warmer weather.

  • Manage heat generated by aquarium lighting and pumps.

  • Support temperature control in reef and coral systems.

  • Reduce the impact of changing room temperatures.

  • Provide consistent cooling for larger marine installations.

When selecting a chiller for a saltwater aquarium, check that the heat exchanger and all water-contact components are suitable for marine use. Titanium heat exchangers are used in several models within the TECO and Hailea ranges.

Aquarium Chillers for Freshwater Tanks

Freshwater aquariums can also benefit from active cooling, particularly where room temperatures rise during summer or where equipment generates additional heat.

A fish tank chiller circulates aquarium water through a cooling unit before returning it to the tank. The thermostat monitors the water temperature and controls cooling to maintain the selected setting.

The required cooling capacity depends on the aquarium volume, room temperature, lighting, pumps and other sources of heat.

Smaller aquariums may only require a compact chiller, while larger freshwater systems may need a more powerful unit with a higher recommended water flow rate.

Aquarium Chiller and Heater Combinations

Some aquarium chillers are available as combination chiller/heater units. These systems provide both cooling and heating functions, helping to maintain the required water temperature throughout the year.

A combination unit can be useful where aquarium temperatures fluctuate significantly between seasons or where the installation requires both heating and cooling.

TECO offers selected models with integrated heating options, including the TK1000EH and TK2000EH configurations.

Always check the individual product specification to confirm whether a heater is included or whether it is an optional accessory. Not every TECO or Hailea chiller supports heating.

Commercial Water Chillers

Larger aquatic installations may require more powerful water cooling equipment than a standard domestic aquarium chiller can provide.

Commercial chillers are designed for higher cooling demands and can be suitable for larger aquariums, professional aquatic systems and certain industrial water applications.

The TECO commercial range includes larger-capacity units, with models designed for substantial water volumes and higher cooling requirements.

When selecting a commercial water chiller, consider:

  • Total system water volume.

  • Heat load generated by pumps, lighting and other equipment.

  • Required cooling temperature.

  • Ambient operating temperature.

  • Water flow rate through the chiller.

  • Available installation space.

  • Electrical supply and power requirements.

For larger systems, the nominal aquarium capacity alone is not enough to determine the correct chiller. A more detailed assessment of the heat load and operating conditions is recommended.

How to Choose the Correct Aquarium Chiller

Choosing an aquarium chiller involves more than matching the advertised tank capacity. The correct model depends on the amount of heat that needs to be removed, the surrounding temperature and the water flow through the cooling unit.

Consider the following factors before purchasing.

1. Aquarium Water Volume

Start by calculating the total volume of water in your aquarium and connected filtration equipment.

Chillers are often advertised with a recommended aquarium capacity, but these figures depend on specific operating conditions. A heavily illuminated reef aquarium may generate considerably more heat than a lightly equipped freshwater tank of the same volume.

Use the manufacturer's recommended capacity as a starting point rather than a guaranteed maximum.

2. Cooling Capacity

Cooling capacity determines how much heat the chiller can remove under specified conditions.

A unit that is too small may struggle to maintain the required temperature during warm weather. Choosing an appropriately sized chiller helps avoid excessive operating times and inadequate cooling.

3. Water Flow Rate

Every aquarium chiller has a recommended water flow range, normally measured in litres per hour (LPH).

The aquarium pump must deliver a suitable flow rate through the chiller. Too little or too much flow can affect cooling performance and may fall outside the manufacturer's operating recommendations.

Always check the minimum and maximum flow rates for the selected model.

4. Operating Temperature and Ambient Conditions

The difference between the aquarium water temperature and the surrounding room temperature affects the cooling demand.

A chiller installed in a warm cabinet or poorly ventilated room may have to work harder to remove heat. Allow sufficient ventilation around the unit and follow the manufacturer's installation guidance.

5. Power Consumption

Compare the electrical consumption of different models alongside their cooling capacity.

If a chiller will operate frequently, energy efficiency becomes particularly important. TECO models use refrigeration technologies designed to provide efficient cooling, with performance varying according to model and operating conditions.

6. Heat Exchanger Material

For marine aquariums, the material of the heat exchanger is particularly important.

Titanium heat exchangers are used in selected TECO and Hailea chillers because of their suitability for compatible freshwater and saltwater applications. Always confirm the manufacturer's specification for the exact model.

7. Installation and Pipe Connections

Check the chiller's inlet and outlet connection sizes, recommended pipework and required pump flow rate.

Also consider the physical dimensions of the unit and the ventilation space needed around it. A compact chiller may be easier to install in a cabinet, but it must still have sufficient airflow to dissipate heat.

Aquarium Chiller Maintenance

Regular maintenance helps preserve cooling performance and extend the working life of an aquarium chiller.

The maintenance requirements vary by manufacturer and model, but common checks include:

  • Cleaning air intake filters where fitted.

  • Keeping ventilation openings clear.

  • Checking water connections and pipework for leaks.

  • Inspecting the water circuit for blockages or restricted flow.

  • Monitoring operating temperature and cooling performance.

  • Following the manufacturer's recommended servicing schedule.

Some TECO models feature magnetic filters designed to make routine cleaning more convenient. Maintenance access and replacement component availability vary across the range.

Refrigeration-system repairs should be carried out by suitably qualified technicians. Do not attempt to open or service sealed refrigeration components unless authorised and qualified to do so.

Buy TECO and Hailea Aquarium Chillers at GroAqua

Explore the range of aquarium water chillers available at GroAqua, including TECO and Hailea models for freshwater tanks, marine aquariums, reef systems and larger aquatic installations.

From compact chillers for smaller aquariums to high-capacity commercial cooling units, our collection offers solutions for a variety of water temperature management requirements.

Compare aquarium capacity, cooling performance, water flow requirements and product features to find a suitable chiller for your installation.

If you are unsure which model is right for your aquarium, contact GroAqua with your tank volume, desired water temperature, typical room temperature and filtration flow rate so that the requirements can be assessed.

© 2026 GroAqua, Powered by Shopify

    • American Express
    • Apple Pay
    • Bancontact
    • Bizum
    • Diners Club
    • Discover
    • Google Pay
    • iDEAL Wero
    • Klarna
    • Maestro
    • Mastercard
    • MB WAY
    • PayPal
    • Satispay
    • Shop Pay
    • Union Pay
    • Visa