Easy user-replaceable sensor allows for quick sensor replacements, if needed.
Quickly switch DO sensors without having to send in the instrument for repair or replacing the entire cable assembly.
One-year sensor warranty.
Uses convenient screw-on cap membranes making membrane changes simple and easy.
To ensure quality, YSI inspects conductivity solutions with reference to primary standard solutions according to OIML recommendation 56. Bottles include a table of corrections at temperatures between 20 and 30 oC.
For sea water equipment.
Easy user-replaceable sensor allows for quick sensor replacements, if needed. No tools necessary.
Six-month sensor warranty.
Measure ammonium (ammonia conversion) quickly and easily with the 1004 sensor.
Note - for use in freshwater applications only.
The 605104 Ammonium ISE, NH4+ Sensor is compatible with these YSI Handheld Instruments*:
ProQuatro
Pro Plus (Discontinued, replaced by ProQuatro)
*Requires Cable/Probe Assembly.
Compatible Cables include:
60510 (ISE)
6051020 (ISE/DO)
6051030 (ISE/conductivity)
605790 Quatro (DO/conductivity/ISE/ISE)
Item is heat packed in the winter months. Shipment must be made via 2-day or next day carrier during that time
The ODO/CT, probe and cable assembly features integral (i.e., built-in) optical dissolved oxygen, conductivity, and temperature sensors and is available in lengths up to 100 meters. It’s perfect for measuring DO in the following applications – estuary, wetland, coastal, aquaculture, or any application requiring accurate, real-time salinity-compensated DO measurements.
The ODO/CT assembly is compatible with the ProSolo, ProSwap, and ProDSS handhelds (sold separately). Pre-assembled ProSolo kits are available
The ODO/CT has all the advantages of optical dissolved oxygen technology – higher accuracy, less maintenance, no stirring required for accurate measurements, holds calibration longer than membrane covered sensors and is not susceptible to interferences from other gases.
Instrument setup is quick and easy with the integral sensors, which eliminates the need to install sensors before use. The digital technology of the ProDSS allows the handheld to automatically recognize connected sensors, so there is no need to tell the instrument what is connected.
The ProDIGITAL ODO/CT probe and cable assembly features include:
Integral (i.e. built-in) optical DO, conductivity, and temperature sensors that are auto-recognized by Pro Series handhelds, reducing instrument set-up time
Automatically compensates DO mg/L measurements for salinity; no need to enter salinity compensation values
Rugged Optical DO sensor cap with a 2-year warranty is pre-installed on new assemblies
Fits in a 1 inch well
The ProSolo ODO/CT kit includes the digital ProSolo handheld; an optical dissolved oxygen, conductivity, and temperature cable/probe assembly (4 or 10 meter cable length); and a soft-sided carrying case. The ProSolo handheld is the direct replacement for the ProODO Optical Dissolved Oxygen handheld.
OverviewODO® Sensor Technology Dissolved oxygen measurement technology has advanced from electrochemical sensors, such as polarographic and galvanic, to luminescent-based, optical sensors. YSI optical DO sensors are non-consumptive, meaning oxygen is not consumed during the measurement. As a result, there is no flow dependence or stirring required with ODO, allowing for the most accurate readings in the field. Advantages over electrochemical sensors include: Higher accuracy with no stir dependence Less drift over time; holds calibration longer Less maintenance; no membranes or electrolyte Real-Time Salinity Compensation With an integral conductivity module, the ODO/CT probe assembly enables the ProSolo to automatically compensate DO mg/L measurements for changes in salinity. The 4-electrode conductivity cell, designed for rugged field performance, is easily cleaned and requires minimal maintenance.
Technical InfoProDIGITAL Smart Sensors In addition to utilizing the most advanced DO sensing technology, the ProSolo incorporates smart sensor technology that enables sensors to be automatically recognized by the handheld. Additionally, DIGITAL sensors store calibration data, so probe assemblies can be swapped between handhelds without the need for re-calibration. Provides Years of Sampling for All Field Conditions The ProSolo handheld meets the demands of true field work with a rugged, waterproof case (IP-67 rated) and a military-spec (MS) cable connector. Rigorously drop tested from all angles, the handheld features a 3-year warranty, while a 2-year warranty is included with the probe assembly and ODO Cap. Advanced Data Management ProSolo includes KorDSS Software, a powerful data management program for easy 2-way communication between the meter and a PC. A unique data backup feature allows for the export of data to a USB flash drive (included) in csv format without having to connect to a computer. Convenient Sampling Experience Ergonomic handheld for a comfortable grip Easy-to-read color display and backlit keypad Large onboard memory with storage capacity for over 100,000 data sets Site ID and Data ID tag capabilities for data organization Data export directly to USB flash drive (included) Single cable design for probe assembly lengths ranging from 1- to 100-meters Long-life rechargeable lithium-ion battery that is user-replaceable Simple and quick calibration procedures
Size
2.46 cm diameter, cable options for 1, 4, 10, 20, 30, 50, and 100 m lengths
Dissolved Oxygen
(Optical luminescence)Units: % saturation, % saturationlocal, mg/L, ppm
Range: 0 to 500%, 0 to 50 mg/L
Accuracy: 0 to 200%: ±1% of reading or 1% saturation, whichever is greater
200 to 500%: ±8% of reading
0 to 20 mg/L: ±0.1 mg/L or 1% of reading, whichever is greater
20 to 50 mg/L: ±8% of reading
Resolution: 0.01 mg/L and 0.1%, or 0.1 mg/L and 1% (auto-adjusts based on range)
Temperature
(Thermistor)Units: °C, °F, K
Range: -5 to 70°C (temperature compensation range for DO mg/L measurement: -5 to 50°C )
Accuracy: ±0.2°C
Resolution: 0.1°C or 0.1°F (auto-adjusts based on range)
Conductivity
(Four nickel electrode cell)Units: μS/cm, mS/cm
Range: 0 to 200 mS/cm
Accuracy: 0 to 100 mS/cm ±0.5% of reading or .001 mS/cm, whichever is greater
100 to 200 mS/cm ±1.0% of reading
Resolution: 0.001, 0.01, or 0.1 mS (range dependent)
Specific Conductance
Units: μS/cm, mS/cm
Range: 0 to 200 mS/cm
Accuracy: 0 to 100 mS/cm ±0.5% of reading or .001 mS/cm, whichever is greater
100 to 200 mS/cm ±1.0% of reading
User selectable reference temperature (15 to 25°C; default 25°C) and compensationcoefficient (0 to 4%/°C; default 1.91%)
Resolution: 0.001, 0.01, 0.1 mS/cm
Warranty
2 years on cable, probe, and ODO sensor cap
The ProSolo ODO/T kit includes the digital ProSolo handheld, an optical dissolved oxygen and temperature probe assembly (4 or 10 meter cable length), and a soft-sided carrying case.
OverviewThe ODO/T probe assembly pairs with the ProSolo Handheld to form a complete sampling system. Featuring integral, digital sensors, the ODO/T is plug-and-play which minimizes time spent on instrument setup. Pro DIGITAL technology allows the handheld to automatically recognize connected sensors, so there is no need to tell the instrument what is connected. Optical Dissolved Oxygen (ODO) technology is non-consumptive, meaning oxygen is not consumed during the measurement. Flow dependence is non-existent and no stirring is required, resulting in the most accurate DO measurements available from a probe. The ODO sensor is not susceptible to interferences from other gases, drifts less and holds calibration longer than membrane covered sensors. Maintenance is a breeze with a simple, threaded optical cap that is good for at least two years. The ProSolo Handheld features an easy-to-read color display, large capacity memory, intuitive interface, rechargeable battery, and powerful data management software (KorDSS) for powerful, yet convenient sampling experience. Great for surface water, groundwater, coastal/estuarine, aquaculture, and wastewater applications!
Calibration
400 detailed calibration records can be stored and are available to view, download, and print
Certifications
CEC, CE; RoHS; IP-67; WEEE; FCC; UN Part III, Section 38.3, Test methods for lithium-ion batteries (Class 9)
Data Management
100 user-defined sites and 100 user-defined data ID tags; site pictures can be sent to the handheld via KorDSS
Display
Color, LCD graphic display; 3.9 cm width x 6.5 cm height
Languages
English, Spanish, German, French, Italian, Norwegian, Portuguese, Japanese, Chinese (Simplified & Traditional), Korean, Thai
Logging Capabilities
Single point or continuous with autostable feature
Memory
> 100,000 data sets
Operating Temperature
0 to 50 °C (32 to 122 °F)
Power
Rechargeable lithium-ion battery pack provides ~48 hours with the handheld only; battery recharge time is ~9 hours with the AC power adapter; the instrument can also be powered via AC or external power pack through the USB port
Size
8.3 cm width x 21.6 cm length x 5.6 cm depth (3.27 in x 8.5 in x 2.21 in)
Storage Temperature
0 to 45 °C (32 to 113 °F) with battery installed; 0 to 60 °C (32 to 140 °F) without battery installed
USB
Built-in micro USB On-The-Go port for PC connection, recharging/powering the handheld and connecting directly to a USB stick
Warranty
3-year handheld warranty
Weight
567 grams (1.25 lbs) with battery
YSI ProSolo Quick Start Guide
Manuals
626973-01 | ProDIGITAL User Manual | English
626973-03 | Manuel d'utilisation ProDIGITAL | Français
626973-06 | ProDIGITAL Benutzerhandbuch | Deutsche
626973-04 | Manuale d’uso ProDIGITAL | Italiano
626973-07 | ProDIGITAL 取扱説明書 | 日本人
626973-05 | Manual do Utilizador ProDIGITAL | Português
626973-08 | ProDIGITAL 用户手册 | 中文 (Simplified)
626973-02 | Manual de usuario de ProDIGITAL | Español
626973-09 | ProDIGITAL 用戶手冊 | 中文 (Traditional)
