Easy and accurate digital testing lets you manage your process better. From hydroponics and aquariums through to cheese making and brewing, Milwaukee products let you achieve the next level.
Milwaukee's products are used around the world from simple pens and advanced testers through to meters, monitors and controllers. We help you manage parameters including pH, conductivity, salinity, BRIX, temperature and more.
Find the right Milwaukee for you.
Calibration solutions are no included Over 200,000 people have relied on the Milwaukee pH600AQ compact pH pen tester to move from difficult to use and interpret pH strips to digital testing. SUMMARY The Milwaukee pH600AQ compact pen tester is specifically designed to help maintain aquariums and aquaculture. Keeping the proper pH improves results for aquarium fish and quality in a range of fish raised in aqulculture. Use digital accuracy to keep pH in your target range for better results. WHAT PEOPLE ARE SAYING "Accurate results and calibrated right out of the box." "Must have for any aquarium owner." "Good value. Easy to use. Consistent." DESIGN FEATURES Fast, accurate results with digital LCD readout Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes Cap to protect the pH sensor and keep it wet when stored upright Low power demand for extended battery life (batteries included) USE AND CARE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! Here are our top four tips. 1. Always store upright with the cap full of buffer or storage solution MA9015 not water. 2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Pen in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.
€37,95
Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month. M10007B is a lab grade pH 7.01 calibration solution certified to meet the standard with an accuracy of ±0.01 pH removing the inaccuracies involved with mixing solutions from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 7.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification
€1,95
Please note that the probe is replaceable on this unit.The Milwaukee Waterproof pH51 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, pools and many other applications. The Milwaukee pH51 pH tester offers: ACCURACY The Waterproof pH51 tester is accurate to ±0.1 pH and is easy to read. With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results. LONG LIFE The tester comes with a replaceable pH probe with a double junction probe designed for longer life. FAST RESPONSE The probe is double junction allowing quick, accurate pH readings and respose times. WATERPROOF CONSTRUCTION No more worries about dropping your tester while measuring. The pH51 is waterproof to IP65. LIGHT WEIGHT At just 3.5 ounces, the pH51 is easy to handle at up to half the weight of other testers. EASE-OF-USE A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Extreme pH accuracy to ±0.1 pH with a pH range (0.0 pH to 14.0 pH). Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading. Simple manual one or two-point calibration. Gel-filled, double junction pH electrode for low maintenance and high performance. Fully waterproof to IP65. Over 1500 hours of continuous battery life (batteries included). Replaceable pH electrode. CARE AND USE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water. 2. Clean your Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Tester in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.
€52,95
The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select. Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications. The Milwaukee Waterproof pH55 pH/temp. tester offers: ACCURACY The Waterproof pH55 PRO tester is accurate to ±0.1 pH & +/-0.5°C (+/-1°F) and is easy to read. With easy 2 point automatic calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results. LONG LIFE The tester comes with a replaceable pH probe with a double junction probe designed for longer life. FAST RESPONSE The probe is double junction allowing quick, accurate pH readings and response times. WATERPROOF CONSTRUCTION No more worries about dropping your tester while measuring. The pH55 PRO is waterproof to IP65. LIGHT WEIGHT At just 3.5 ounces, the pH55 PRO is easy to handle at up to half the weight of other testers. EASE-OF-USE A large Dual Level LCD screen with easy-to-read graphic symbols, makes it easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Extreme pH accuracy to ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH). Resolution to 0.1 pH. Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading. Is fully compensated for temperature (ATC). Simple Automatic one or two-point calibration. 2 Sets of pre-memorized buffers. Gel-filled, double junction pH electrode for low maintenance and high performance. Over 300 hours of battery life (batteries included). Fully waterproof to IP65. Replaceable pH electrode Mi56P. CARE AND USE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water. 2. Clean your Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Tester in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.
€94,95
The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy. The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.Please note that this item does not include calibration solutions. DESIGN FEATURES Fast, easy-to-read results with large digital LCD readout Repeatable, accuracy to ±1.5% FS Lightweight and portable Simple 2 point open air calibration (see video below) Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluorethylene (PTFE) membrane sensor 5 O-rings, membranes and one protective cap included 10 feet probe cable for extra flexibility when testing 70 hours of battery life with continuous use (battery included) with low battery warning CARE AND USE “OPEN AIR” CALIBRATION PROCEDURE 1. Remove the membrane Take the membrane off the end of the probe and dry the diode off. 2. Zero out the display Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0. 3. Fill the membrane Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure) 4. Attach the membrane Screw the membrane on to the probe. 5. Let stablize Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes) 6. Adjust Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100. You are now calibrated. EXTRA TIPS Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane. Always use fresh electrolyte solution (MA9071). DOWNLOAD EXCEL WORKSHEET FOR TEMPERATURE COMPENSATION ON MW600 DO METER (XLS) Determine water temperature, insert reading from meter display, and this worksheet will automatically calculate a temperature-compensated DO reading for you.
€355,95
Convenient pH Calibration Solution The Milwaukee M10004B pH 4.01 Calibration Solution Sachet is the perfect tool for calibrating your pH meters and testers. Each sachet contains a pre-measured amount of pH solution, making calibration quick and easy. Simply open the sachet, pour the solution into your device, and you're ready to go. No more measuring and mixing solutions – just fast, accurate calibration every time. Precise pH Measurement This calibration solution is formulated to give you precise pH readings, ensuring the accuracy of your pH meters and testers. With a pH value of 4.01, it provides a reliable reference point for calibration. Whether you're testing water quality, soil acidity, or any other pH-dependent process, this solution will help you get the most accurate results possible. Single-Use Sachets Each Milwaukee M10004B pH 4.01 Calibration Solution Sachet is designed for single use, eliminating the need for storage and potential contamination. This ensures that every calibration is fresh and accurate, giving you confidence in your results. With these convenient sachets, calibration has never been easier or more reliable.
€1,95
MA9015 is a lab grade electrode storage solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens. To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not be allowed to dry out. Properly storing your pH electrode in a solution keeps the glass membrane well hydrated which maintains proper function and provides accurate readings. MA9015 also helps keep the junction in your pH and ORP electrode flowing which is critical for fast results. DESIGN FEATURES Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings. Formulated to minimize organic growth on your electrode. Sealed against light with air tight, tamper proof cap. Factory blended to precise standards in a dedicated, temperature controlled environment. Simply open and add to the cap of your electrode or tester. Each bottle marked with lot number and expiration date.
€17,95
Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month. M10010B is a lab grade pH 10.01 calibration solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired or contaminated solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 10.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification
€1,95
The Milwaukee MW101 PRO pH meter has won fans around the world with its reliable, fast operation as well as its rugged design and accuracy. WHAT PEOPLE ARE SAYING "This is an awesome pH meter!" "I love this little meter." "Rugged portable meter, calibrates easily with pH 4, 7 and 10 buffers, readings dead on." SUMMARY The Milwaukee MW101 PRO pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy. The Milwaukee PRO pH Meter is preferred by people testing samples that cause other pH testers and meters to fail from brewers and wine makers to hydroponic growers and farmers. The Milwaukee PRO pH meter offers: SPEED The MW101 delivers fast results to ±0.02 pH accuracy with two point calibration. TOUGHNESS The rugged meter is designed to take knocks. Paired with low maintenance, lab grade SE220 double junction, gel filled electrode, the MW101 is ideal for everyone from educators and pool professionals to brewers and growers. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Accurate to ±0.02 pH with a 0.00-14.00 pH range. Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple manual two-point calibration for increased accuracy. Gel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage (SE220 probe included). 3 feet probe cables for extra flexibility when testing. Auto shut off and low power demand for approx. 300 hours of continuous use. (battery included) USE AND CARE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. SENSING BULB The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. REFERENCE JUNCTION The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function. You can extend the life of your pH electrode in the following ways. CLEANING AND STORAGE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee codes MA9015 and MA9016 at checkout time! This will be needed to help clean and condition the pH electrode before use! STORAGE The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. CLEANING Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016. CALIBRATION The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.
€180,95
The MA9071 electrolyte fill solution is designed for Milwaukee's polarographic dissolved oxygen probe. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe. DESIGN FEATURES PRECISE FORMULATION Factory mixed using reagent grade chemicals in a dedicated, temperature controlled environment. TRACEABLE Product labeled with product code, lot number and expiration date. SECURE Air tight bottle with tamper-proof seal. USE AND CARE “OPEN AIR” CALIBRATION PROCEDURE FOR THE MW600 DISSOLVED OXYGEN METER 1. Remove the membrane Take the membrane off the end of the probe and dry the diode off. 2. Zero out the display Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0. 3. Fill the membrane Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure) 4. Attach the membrane Screw the membrane on to the probe. 5. Let stabilize Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes) 6. Adjust Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100. You are now calibrated. EXTRA TIPS Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane. Always use fresh electrolyte solution (MA9071).
€54,95
High Quality Solution Milwaukee MA9070 Zero Oxygen Calibration Solution Kit offers high-quality solution for calibrating oxygen levels in your equipment. The kit contains all the necessary components to ensure accurate and reliable calibration results each time. With this kit, you can rest assured that your devices are properly calibrated for precise readings. Easy to Use This calibration solution kit is designed for easy and convenient use. Simply follow the instructions provided in the kit to calibrate your equipment with ease. The user-friendly design makes it suitable for both professionals and beginners. You can trust Milwaukee MA9070 to deliver consistent and accurate results without any hassle. Reliable Performance Milwaukee MA9070 Zero Oxygen Calibration Solution Kit is known for its reliable performance and durability. It is built to last and withstand frequent use in various settings. Whether you are working in a laboratory, industrial facility, or research environment, this kit is designed to meet your calibration needs. Invest in Milwaukee MA9070 for dependable performance every time.
€31,95
MA9016 is a lab grade electrode cleaning solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens. Your accuracy and speed of your results are dependent on your pH sensing bulb and ORP platinum tip being clean. pH and ORP electrodes also need a free flowing junction to function. Milwaukee's cleaning solution helps both keep sensing parts clean and the junction open. Simply open the bottle, fill a beaker or container so that the level covers the sensor and junction, and soak for 15 to 20 minutes followed by a soaking in MA9015 storage solution for at least 2 hours. DESIGN FEATURES Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings. Specially formulated for cleaning electrodes Factory blended to precise standards in a dedicated, temperature controlled environment. Sealed against light with air tight, tamper proof cap. Each bottle marked with lot number and expiration date.
€17,95
The performance of conductivity probes are affected by use due to residue build up and aging. M10032B is a lab grade 1382 ppm TDS solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter. TDS readings are effected by temperature. To help with this, a chart of the actual ppm value at various temperatures is printed on each sachet. Milwaukee TDS solutions are labelled with the lot number and expiration date and packaged in an air tight, tamper-proof sachet. DESIGN FEATURES Fundamental for accurate TDS measurement. Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978. Sealed against light and air. Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Each 20 mL sachet is marked with lot number and expiration date. A temperature chart of the actual ppm value at various temperatures is printed on each sachet. 5 year expiry date.
€1,95
Electrode cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and sediment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode. DESIGN FEATURES Electrode Cleaning Solution - 20 mL (box of 25). Fundamental for gently cleaning the electrode between uses and before storage. Sealed against light and air. Ideal for on-the-spot cleaning too. Simply open, insert the tester or electrode into the sachet and gently stir let soak for 15 minutes. Formulated with a 5 year expiry
€1,95
The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy. The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners. DESIGN FEATURES Fast, easy-to-read results with large digital LCD readout Repeatable, accuracy to ±1.5% FS Lightweight and portable Simple 2 point open air calibration (see video below) Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluorethylene (PTFE) membrane sensor 5 O-rings, membranes and one protective cap included 10 feet probe cable for extra flexibility when testing 70 hours of battery life with continuous use (battery included) with low battery warning CARE AND USE “OPEN AIR” CALIBRATION PROCEDURE 1. Remove the membrane Take the membrane off the end of the probe and dry the diode off. 2. Zero out the display Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0. 3. Fill the membrane Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure) 4. Attach the membrane Screw the membrane on to the probe. 5. Let stablize Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes) 6. Adjust Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100. You are now calibrated. EXTRA TIPS Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane. Always use fresh electrolyte solution (MA9071). DOWNLOAD EXCEL WORKSHEET FOR TEMPERATURE COMPENSATION ON MW600 DO METER (XLS) Determine water temperature, insert reading from meter display, and this worksheet will automatically calculate a temperature-compensated DO reading for you.
€397,95
The performance of conductivity probes are affected by use due to residue build up and aging. M10031B is a lab grade 1413 µS/cm conductivity solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter. Conductivity readings are effected by temperature. To help with this, a chart of the actual µS/cm value at various temperatures is printed on each sachet. Milwaukee conductivity solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sachet. Design Features Fundamental for accurate conductivity measurement. Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978. Sealed against light and air. Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Each 20 mL sachet is marked with lot number and expiration date. A temperature chart of the actual µS/cm value at various temperatures is printed on each sachet. 5 year expiry date.
€1,95
Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month. M10007B is a lab grade pH 7.01 calibration solution certified to meet the standard with an accuracy of ±0.01 pH removing the inaccuracies involved with mixing solutions from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 7.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification
€26,95
The Milwaukee T75 Waterproof Total Dissolved Solids (TDS) Pen is designed for, aquariums, aquaculture, education, water conditioning and many other applications. The T75 helps you make sure that your fish have the right TDS balance to help them stay healthy. TDS also help keep filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results. DESIGN FEATURES Measures Total Dissolved (TDS) direct and with automatic temperature compensation. Easy-to-read LCD. Ideal range for aquariums (0 to 1999 ppm). Units in ppm easily convertible to uS/cm. Factory calibrated with the ability to recalibrate if needed. 250 hours continuous use (3 x 1.5V batteries included). Simple one point calibration. Fully waterproof to IP65 Replaceable TDS electrode MA73075. CARE AND USE MAINTENANCE TDS/PPM electrodes can develop nutrient build up over time. To miminice build up, always rinse the probe in fresh tap or DI water after every use. CONVERTING TDS TO EC The Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution. TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale. Your TDS/PPM readings can be approximately converted to uS/cm as shown in the examples below. 1 ppm = 2 uS/cm on the 0.5 factor scale 1 ppm = 1.43 µS/cm on the 442 scale or .70 factor scale Thank you for considering Milwaukee to help you take your results to the next level.
€52,95
The Milwaukee EC59 PRO Conductivity (EC) & Total Dissolved Solids (TDS) Tester is designed for aquaculture, food, wine, laboratory, water treament and many other applications. It is the ideal meter to help make sure that your EC/TDS/Temp. needs are being met and are reliable results for your analysis. Keep EC/TDS/TEMP. in your target range to help your achieve best results. DESIGN FEATURES Measures EC/TDS/Temp. with automatic temperature compensation (ATC). Ideal range for all different applications (0 to 3999 uS/cm) | 0 to 2000 ppm | 0.0 to 60°C (32.0 to 140.0°F). Units in uS/cm or ppm easily convertable to other ranges. Factory calibrated with the ability to recalibrate if needed. Replaceable electrode Mi59P. Fully waterproof to IP65. Approximately 100 hours of use (4 x 1.5V batteries included). CARE AND USE MAINTENANCE EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap water after every use. CONVERTING EC TO TDS The Milwaukee PRO Conductivity Tester, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity. EC/TDS can converted. Different scales include the 500 scale, 650 scale and the 700 scale. Your uS/cm reading can be approximately converted to other scales as shown in the examples below. 2.00 mS/cm = 2000 uS/cm = 1000 ppm on .50 factor scale 2.00 mS/cm = 2000 uS/cm = 1400 ppm on the 442 scale or .70 factor scale
€94,95
The Milwaukee MW803 MAX Waterproof Low Range 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers. The Milwaukee MW803 MAX Waterproof 4-in-1 Tester offers: ACCURACY The MW803 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% Full Scale and ±0.5°C / ±1°F for temperature. With automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration. LONG LIFE The tester comes with a replaceable pH probe with a double junction probe design for longer life. FAST RESPONSE An exposed temperature probe is located close to the pH probe for fast temperature compensation. WATERPROOF CONSTRUCTION No more worries about dropping your tester while measuring. The MW803 is fully waterproof to IP65. LIGHT WEIGHT At just 3.5 ounces, the MW803 MAX is easy to handle at up to half the weight of other testers. EASE-OF-USE A large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out. DESIGN FEATURES Fast easy to read results with large digital dual LCD readout. Extreme accuracy to ±0.05 pH, EC / TDS 2% Full Scale and Temperature ±0.5 C / ±1 F. Range 0.00 – 14.00 pH | EC 0 to 3999 uS/cm | TDS 0 - 2000 ppm | Temperature: 0.0 to 50.0 C / 32.0 to 122.0 F. Lightweight and portable at just 3.5 ounces. Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading. Simple push button, automatic 1 or 2 point pH calibration with 5 saved calibration points and simple 1 point EC calibration. Gel-filled, double junction pH electrode for low maintenance and high performance with exposed temp. sensor for fast readings. Auto shut off after 8 minutes of non-use. Fully waterproof to IP65. Battery life approx. 100 hour of continuous use (batteries included). CARE AND USE The MW803 PRO Tester includes both a pH and EC electrode. Both need maintenance. All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! EC sensors are more robust but can still be affected by residue build up. Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water. 2. Clean your Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor. 4. Gently stir the PRO Tester in the sample for a faster result. 5. Rinse in water after every test. Thank you for considering Milwaukee to help you take your results to the next level.
€316,95
accurate pH calibration Ensure precise calibrations with the Milwaukee M10004B pH 4.01 Calibration Solution Sachet. This pack contains 25 individual sachets of pH 4.01 solution, providing a reliable option for calibrating pH meters and electrodes. Each sachet is conveniently pre-measured for easy use and eliminates the need for measuring out liquid solutions. high-quality formulation The Milwaukee M10004B pH 4.01 Calibration Solution Sachet is made with high-quality ingredients to ensure accuracy and consistency in pH readings. The solution is specially formulated to maintain a pH level of 4.01, making it ideal for calibrating a wide range of pH meters used in various applications. Trust this reliable solution for your calibration needs. convenient packaging Each sachet in the Milwaukee M10004B pH 4.01 Calibration Solution pack is individually sealed to prevent contamination and maintain freshness. The compact size of the sachets makes them easy to store and transport, providing convenience for both laboratory and field use. Stay prepared with this convenient pack of calibration solutions for your pH testing equipment.
€26,95
The performance of conductivity probes are affected by use due to residue build up and aging. M10038B is a lab grade 6.44 ppt TDS solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter. TDS readings are effected by temperature. To help with this, a chart of the actual ppm value at various temperatures is printed on each sachet. Milwaukee TDS solutions are labelled with the lot number and expiration date and packaged in an air tight, tamper-proof sachet. DESIGN FEATURES Fundamental for accurate TDS measurement. Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978. Sealed against light and air. Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Each 20 mL sachet is marked with lot number and expiration date. A temperature chart of the actual ppm value at various temperatures is printed on each sachet. 5 year expiry date.
€1,95
The Milwaukee CD600 Total Dissolved Solids (TDS) Pen is designed for hydroponics, aquariums, horticulture, water conditioning and many other applications. The CD600 helps you make sure that your plants are receiving the right amount of nutrient or helps you keep your filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results. DESIGN FEATURES Measures Total Disolved (TDS) direct and with automatic temperature compensation. Ideal range for hydroponics (0 to 1990 ppm). Units in ppm easily convertable to uS/cm. Factory calibrated with the ability to recalibrate if needed. Automatic Temperature Compensation (ATC). 350 hours continuous use (4 x 1.5V batteries included). Simple one point calibration. CARE AND USE MAINTENANCE TDS/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use. CONVERTING TDS TO EC The Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution. TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale. Your TDS/PPM readings can be approximately converted to uS/cm as shown in the examples below. 1 ppm = 2 uS/cm on the 0.5 factor scale 1 ppm = 1.43 µS/cm on the 442 scale or .70 factor scale Thank you for considering Milwaukee to help you take your results to the next level.
€37,95
The Milwaukee CD601 digital electrical conductivity (EC) Pen is designed for aquariums, aquaculture, pools, water conditioning and many other applications. The CD601 helps you make sure that your water has the right amount of nutrient to help keep fish tanks healthy or helps you keep your filters up-to-date and clean for water filtration. Keep EC in your target range to help your achieve better results. DESIGN FEATURES Measures microSiemens (uS/cm) direct and with automatic temperature compensation. Ideal range for aquariums (0 to 1990 uS/cm). Units in uS/cm are easily convertible to (ppm). Factory calibrated with the ability to recalibrate if needed. Automatic Temperature Compensation (ATC). 350 hours continuous use (4 x 1.5V batteries included). Simple one point calibration. CARE AND USE MAINTENANCE EC electrodes can develop nutrient build up over time. To miminise build up, always rinse the probe in fresh tap or DI water after every use. CONVERTING EC TO TDS The Milwaukee EC Pen, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity. EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis. Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below. 2,000 µS/cm = 2.0 mS/cm = 1000 ppm on .50 factor scale 2,000 µS/cm = 2.0 mS/cm = 1400 ppm on the 442 scale or .70 factor scale Thank you for considering Milwaukee to help you take your results to the next level.
€37,95
Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month. M10010B is a lab grade pH 10.01 calibration solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired or contaminated solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 10.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification
€26,95
This Milwaukee 3-in-1 Low Range combo meter allows you to measure pH, EC (conductivity) and TDS with a single meter and one single probe. WHAT PEOPLE ARE SAYING "Superb meter, easy to use, great customer service." "Best meter I have ever owned." "The best meter on the market and Milwaukee customer service is the best." "I have owned this meter for almost 8 years and only replaced the probe once. The calibration nobs are easy to use, and even when I am less then gentle with the thing it keeps on going. I wouldn't consider any other meter." "Easy calibration features." "Light weight and ergonomic." SUMMARY pH and TDS are critical for water conditioning and aquariums. Total Dissolved Solids in drinking water can effect clarity and taste of water. In addition, high TDS levels can effect the health of a fish in an aquarium. High concentrations of TDS can decrease clarity of water in aquariums and decrease photosynthesis in aquatic plants. The Milwaukee MW801 PRO Low Range Combo Meter lets you easily and accurately test pH, conductivity and total dissolved solids (TDS) using a single meter and integrated probe. Simple, portable and rugged. No more juggling multiple electrodes and wires. Automatic temperature compensaton included. The MW801 is the ultimate solution for pH and nutrient management. DESIGN FEATURES The design of the MW801 is focused on simple operation and ruggedness. With a single probe, big screen, easy calibration, the MW801 is exceptionally simple to operate. A tough meter build and a rugged but replaceable probe means that you can expect years of use. The Milwaukee PRO Combo meter offers: pH, conductivity / nutrient EC, TDS (ppm) with automatic temperature compensation. A replaceable, integrated pH, EC, and TDS (ppm) probe with a single 3 foot cable for easy use (SE600 probe included). A fiber junction on the pH sensor to reduce contamination when measuring fertilizer solutions. A light weight and portable form factor at just 5.8 ounces with battery and just over 3 inches wide. A large easy to read display. Factory calibration with a simple, single point manual calibration for both pH and EC. A reputation for a rugged build and long life Specialized design for drinking water, aquaponic, and aquariums. CARE AND USE The MW801 PRO Combo Meter includes both a pH and EC sensor in the SE600 integrated probe. All pH sensors have a limited life and response time gets longer with age. EC sensors are more robust but can still be affected by residue build up. Both need maintenance. Properly maintaining your probe will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH/EC electrode before use! Here are our top four tips. 1. Always store with the cap full of buffer or storage solution not water. 2. Clean your probe regularly by soaking in cleaning solution. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor. 4. Gently stir the probe in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.
€316,95
The Milwaukee MW11 Total Chlorine Photometer lets you go digital with your testing. No more hit and miss testing with strips. Great for aquariums, aquaculture & coral, labs, water conditioning , classroom and more. This meter is also ideal for educators that want their students to learn the basics of water quality analysis to apply in the real world. Simply add the reagent and get a digital reading accurate to ±0.03 ppm within minutes. DESIGN FEATURES Fast, easy-to-read results with large digital LCD readout. Range from 0.00 to 3.50 ppm. Accurate to ±0.03 ppm or ±3% of reading @ 25 °C. Small and ergonomic design. No calibration needed. Reliable and repeatable measurements with no visual assessment. Runs on 1 x AAA battery with auto shut off to extend battery life. Adaptation of the USEPA Method 330.5. The reaction between Free Clorine and DPD causes a slight pink tint in the sample. Thank you for considering Milwaukee to help you take your results to the next level.
€99,95
Optimal Calibration Solution Ensure accurate conductivity measurements with the Milwaukee M10030B 12880 µS/cm Conductivity Calibration Solution Sachet. This high-quality solution is specially designed for calibrating conductivity meters, ensuring precise and reliable readings every time. Each sachet comes pre-measured for convenience, making calibration a quick and hassle-free process. Quality Control Standards Formulated to meet strict quality control standards, this calibration solution provides consistent results for your conductivity measurements. The 12880 µS/cm value is ideal for a wide range of applications, from testing water quality to monitoring industrial processes. Trust Milwaukee's expertise in producing reliable calibration solutions for all your conductivity needs.
€1,95
The Milwaukee MW10 Free Chlorine Photometer lets you go digital with your testing. No more hit and miss testing with strips. Great for agriculture, aquariums, aquaculture & coral, labs, water treatment, classroom and more. This meter is also ideal for educators that want their students to learn the basics of water quality analysis to apply in the real world. Simply add the reagent and get a digital reading accurate to ±0.03 ppm within minutes. DESIGN FEATURES Fast, easy-to-read results with large digital LCD readout. Range from 0.00 to 2.50 ppm. Accurate to ±0.03 ppm or ±3% of reading @ 25 °C. Small and ergonomic design. No calibration needed. Reliable and repeatable measurements with no visual assessment. Runs on 1 x AAA battery with auto shut off to extend battery life. Adaptation of the USEPA Method 330.5. The reaction between Free Clorine and DPD causes a slight pink tint in the sample. Thank you for considering Milwaukee to help you take your results to the next level.
€99,95
Extend the life of your testers Keep your Milwaukee pH55 and pH56 2-in-1 pH / Temperature Testers in top working condition with the Milwaukee MI56P Replacement Electrode. This high-quality electrode is designed as a direct replacement for the original electrode that comes with your testers, ensuring accurate and reliable pH and temperature readings. Easy to install and use The Milwaukee MI56P Replacement Electrode features a simple screw-on design that makes it easy to install on your pH55 or pH56 tester. Once in place, the electrode provides quick and accurate measurements, allowing you to easily monitor and adjust the pH and temperature levels of your samples. With this replacement electrode, you can extend the life of your testers and continue to get precise results with every use. Durable construction for long-lasting performance Constructed with durable materials, the Milwaukee MI56P Replacement Electrode is designed to withstand frequent use in various testing environments. Its sturdy construction ensures that the electrode will hold up to repeated testing, providing reliable performance for years to come. Invest in the Milwaukee MI56P Replacement Electrode to keep your pH55 and pH56 testers working like new and to ensure accurate readings in all your pH and temperature testing applications.
€67,95
The Milwaukee EC60 PRO Conductivity Tester is designed for hydroponic and other growers to help you make sure that your plants have the ideal amount of nutrient avaiable. Keep EC in your target range to help your achieve better results. DESIGN FEATURES Measures conductivity and TDS with automatic temperature compensation Ideal range for hydroponic and other growers (0.00 to 20.00 mS/cm) Units in mS/cm or ppt easily convertible to ppm Factory calibrated with the ability to recalibrate if needed Replaceable electrode Fully waterproof to IP65 Approximately 100 hours of use (4 x 1.5V batteries included) CARE AND USE MAINTENANCE EC electrodes can develop nutrient build up over time. To miminise build up, always rinse the probe in fresh tap water after every use. CONVERTING EC TO TDS The Milwaukee EC60 PRO Conductivity Tester, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity. In Hydroponics, EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis. Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below. 2.00 mS/cm = 2000 uS/cm = 1000 ppm on .50 factor scale 2.00 mS/cm = 2000 uS/cm = 1400 ppm on the 442 scale or .70 factor scale
€94,95
High-Quality Replacement Milwaukee MA841 Spare Membrane is a top-tier replacement option for dissolved oxygen probes. Made with high-quality materials, this spare membrane ensures accurate readings and long-lasting durability. Whether you're in a lab setting or conducting field work, this replacement membrane is designed to meet all your dissolved oxygen measurement needs. Easy to Install Designed for easy installation, the Milwaukee MA841 Spare Membrane can be quickly swapped out with minimal downtime. Simply remove the old membrane from your dissolved oxygen probe and replace it with this new one. With its user-friendly design, you can effortlessly maintain your equipment and keep your measurements precise. Compatibility and Reliability This spare membrane is specifically designed to be compatible with Milwaukee's MA841 Dissolved Oxygen Probe. Tested for reliability and accuracy, you can trust that this replacement membrane will deliver consistent performance. Ensure your dissolved oxygen probe continues to work at its best with the Milwaukee MA841 Spare Membrane.
€73,95
MW401 is a Portable Low Range Total Dissolved Solids (TDS) Meter with Automatic Temperature Compensation. This instrument has been designed for aquariums, aquaculture, labs, and water conditioning applications to meet the needs for equipment suited from hobbist to professional. It is also a great meter for food labs, and water treatment applications. TDS testing provides a method to optimize chemical applications and minimize operational cost. In aquarium and aquaculture applications, high concentrations of solids (TDS) can reduce clarity in water can decrease photosynthesis in aquatic plants. In water conditioning, a high (TDS) level can affect the clarity and taste of potable drinking water. The MW401 has a range of 0 to 1990 mg/L (ppm) with a 10 mg/L (ppm) resolution. This (TDS) meter is supplied complete with conductivity probe with 1 m (3.3') cable and calibration solution. DESIGN FEATURES 0 to 1999 mg/l (ppm) range. Fast, easy-to-read results with large digital LCD readout. Supplied with conductivity probe attached to a 3 foot cable. Accuracy to ±2% FS @ 25°C. Lightweight and portable. 300 hours of battery life with continuous use (battery included). SE510 Conductivity probe included. Starter Calibration Solution MI0032B, 1382 ppm (included).
€187,95
Accurate Conductivity Measurement The Milwaukee MW301 PRO Conductivity Meter is a reliable tool for measuring the conductivity of liquids with precision. With a wide measurement range and high accuracy, this meter ensures that you get consistent and reliable results every time. Whether you're conducting experiments in a laboratory or monitoring water quality in a industrial setting, this meter provides the accuracy you need. User-Friendly Design Featuring a compact and portable design, the Milwaukee MW301 PRO Conductivity Meter is easy to use and convenient to carry around. The user-friendly interface allows you to quickly and easily perform conductivity measurements without any hassle. The large display screen provides clear readings, making it simple to interpret your results. Plus, the built-in calibration function ensures the accuracy of your measurements at all times. Durable and Reliable Performance Constructed with high-quality materials, the Milwaukee MW301 PRO Conductivity Meter is built to last. Its durable design ensures that it can withstand the rigors of regular use without compromising its performance. Whether you're working in challenging environments or conducting field measurements, this meter is up to the task. Trust in the Milwaukee MW301 PRO Conductivity Meter for accurate and reliable conductivity measurements every time.
€187,95
High-Quality Replacement Electrode Keep your Milwaukee pH testers in top condition with the Milwaukee MA73600 Replacement Electrode. This electrode is specifically designed for use with the Milwaukee PH51 and PH54 testers, ensuring accurate pH readings every time. Made with high-quality materials, this replacement electrode is built to last, giving you confidence in your testing results. Easy to Install Don't let a worn-out electrode halt your testing process. The Milwaukee MA73600 Replacement Electrode is easy to install, allowing you to quickly replace your old electrode and get back to testing. Simply follow the included instructions for a hassle-free installation process. With minimal downtime, you can continue monitoring and adjusting pH levels with ease. Reliable Performance Trust in the Milwaukee brand for reliable performance when it comes to monitoring pH levels. The Milwaukee MA73600 Replacement Electrode ensures that your pH testers continue to provide accurate and consistent results. With proper maintenance and regular replacement of electrodes, you can rely on your Milwaukee testers for precise pH measurements in various environments.
€49,95
DIGITAL. SIMPLE. COMPACT. Thousands of people have relied on the Milwaukee TH300 compact Digital Temperature Meter to read temperature in difficult areas with it's flexible 1 meter cable and stainless steel probe. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries and wineries the TH300 is your quick temperature meter. SUMMARY The Milwaukee TH300 compact digital thermometer is specifically designed to help professionals and home owners regulate their pools, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results. WHAT PEOPLE ARE SAYING "Accurate results and calibrated right out of the box." "Must have for any aquarium owner." "Good value. Easy to use. Consistent." "No dangerous chemicals" "Used it in the field for checking the fruit to harvest, was great" DESIGN FEATURES Fast, accurate results with large digital LCD readout. Extended temperature range: -50 to 150°C (-58 to 302°F) Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize. Easy, flexible 1 meter cable for hard to reach places. Stainless Steel pointed probe for easy fruit penetration and easy cleaning. Long battery life, approx. 1 year. (batteries included) High accurate digital readings. Clean and Safety Here are our top four tips. 1. Always clean you stainless steel probe after use. 2. Pay close attention to the direction of the probe's sharp tip. 3. If the LCD begins to fade, change your batteries. 4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC. Thank you for considering Milwaukee to help you take your results to the next level.
€60,95
