Gray manual sorting cradle with curved screen.- Width: 50 cm- Length: 70 cm- Height: 40 cmThe grading cradle is priced without grid. The grading grid must be ordered separately.
The Dryden Aqua Air Diffuser is a semi-flexible, high-efficiency fine bubble air diffuser available in 9 different lengths, depending on the air through-put required . It provides oxygen transfer rates of up to 5kg/kw, 10m3/h of air and 1 kg of O2/h. Its semi-flexible construction with its own internal ballast will stay on the bottom of tank or pond without the need to be anchored to the floor.
The Dryden Aqua Air Diffuser combines excellent performance with cost effectiveness for aeration, oxidation and biological treatment.
Dryden Aqua Air Diffuser Key Features
Semi-flexible, tubular construction
Self weighted
Available in 9 lengths from 0.3 – 3m.
Air handling capacity from 1 – 10m3/hr
Less than 0.2 Bar (3 psi) pressure differential
Oxygen transfer efficiency up to 5 kg/kwhr
Resistant to calcification
Easy to clean and maintain
Robust and long-lasting (typical lifespan is 5 – 10 yrs)
Built in non-return valve
Stainless steel and plastic construction
Can be used with Air, N2, CO2
Oxygen Transfer Performance
Surface aerators waste a huge amount of kinetic energy throwing the water into the air, transfer coefficient is 1 kg to 2 kg of oxygen per kW. Membrane diffusers are more efficient at 2 kg to 3 kg of oxygen per kW. The Dryden Aqua diffuser at over 5 kg is therefore the most efficient fine bubble diffuser available and is ideal for retrofit applications as a simple drop in product for tanks and ponds in Aquaculture and Waste Water Treatment.
The Dryden Aqua Air Diffuser is a semi-flexible, high-efficiency fine bubble air diffuser available in 9 different lengths, depending on the air through-put required . It provides oxygen transfer rates of up to 5kg/kw, 10m3/h of air and 1 kg of O2/h. Its semi-flexible construction with its own internal ballast will stay on the bottom of tank or pond without the need to be anchored to the floor.
The Dryden Aqua Air Diffuser combines excellent performance with cost effectiveness for aeration, oxidation and biological treatment.
Dryden Aqua Air Diffuser Key Features
Semi-flexible, tubular construction
Self weighted
Available in 9 lengths from 0.3 – 3m.
Air handling capacity from 1 – 10m3/hr
Less than 0.2 Bar (3 psi) pressure differential
Oxygen transfer efficiency up to 5 kg/kwhr
Resistant to calcification
Easy to clean and maintain
Robust and long-lasting (typical lifespan is 5 – 10 yrs)
Built in non-return valve
Stainless steel and plastic construction
Can be used with Air, N2, CO2
Oxygen Transfer Performance
Surface aerators waste a huge amount of kinetic energy throwing the water into the air, transfer coefficient is 1 kg to 2 kg of oxygen per kW. Membrane diffusers are more efficient at 2 kg to 3 kg of oxygen per kW. The Dryden Aqua diffuser at over 5 kg is therefore the most efficient fine bubble diffuser available and is ideal for retrofit applications as a simple drop in product for tanks and ponds in Aquaculture and Waste Water Treatment.
The Dryden Aqua Air Diffuser is a semi-flexible, high-efficiency fine bubble air diffuser available in 9 different lengths, depending on the air through-put required . It provides oxygen transfer rates of up to 5kg/kw, 10m3/h of air and 1 kg of O2/h. Its semi-flexible construction with its own internal ballast will stay on the bottom of tank or pond without the need to be anchored to the floor.
The Dryden Aqua Air Diffuser combines excellent performance with cost effectiveness for aeration, oxidation and biological treatment.
Dryden Aqua Air Diffuser Key Features
Semi-flexible, tubular construction
Self weighted
Available in 9 lengths from 0.3 – 3m.
Air handling capacity from 1 – 10m3/hr
Less than 0.2 Bar (3 psi) pressure differential
Oxygen transfer efficiency up to 5 kg/kwhr
Resistant to calcification
Easy to clean and maintain
Robust and long-lasting (typical lifespan is 5 – 10 yrs)
Built in non-return valve
Stainless steel and plastic construction
Can be used with Air, N2, CO2
Oxygen Transfer Performance
Surface aerators waste a huge amount of kinetic energy throwing the water into the air, transfer coefficient is 1 kg to 2 kg of oxygen per kW. Membrane diffusers are more efficient at 2 kg to 3 kg of oxygen per kW. The Dryden Aqua diffuser at over 5 kg is therefore the most efficient fine bubble diffuser available and is ideal for retrofit applications as a simple drop in product for tanks and ponds in Aquaculture and Waste Water Treatment.
The Dryden Aqua Air Diffuser is a semi-flexible, high-efficiency fine bubble air diffuser available in 9 different lengths, depending on the air through-put required . It provides oxygen transfer rates of up to 5kg/kw, 10m3/h of air and 1 kg of O2/h. Its semi-flexible construction with its own internal ballast will stay on the bottom of tank or pond without the need to be anchored to the floor.
The Dryden Aqua Air Diffuser combines excellent performance with cost effectiveness for aeration, oxidation and biological treatment.
Dryden Aqua Air Diffuser Key Features
Semi-flexible, tubular construction
Self weighted
Available in 9 lengths from 0.3 – 3m.
Air handling capacity from 1 – 10m3/hr
Less than 0.2 Bar (3 psi) pressure differential
Oxygen transfer efficiency up to 5 kg/kwhr
Resistant to calcification
Easy to clean and maintain
Robust and long-lasting (typical lifespan is 5 – 10 yrs)
Built in non-return valve
Stainless steel and plastic construction
Can be used with Air, N2, CO2
Oxygen Transfer Performance
Surface aerators waste a huge amount of kinetic energy throwing the water into the air, transfer coefficient is 1 kg to 2 kg of oxygen per kW. Membrane diffusers are more efficient at 2 kg to 3 kg of oxygen per kW. The Dryden Aqua diffuser at over 5 kg is therefore the most efficient fine bubble diffuser available and is ideal for retrofit applications as a simple drop in product for tanks and ponds in Aquaculture and Waste Water Treatment.
The filters are intended to purify water from sediment particles such as rust, sand, scale, silt, etc
Key Features
3 times higher capacity comparing to standard PP replacement filters
3 times higher rejection rates
Low losses of pressure
Stable operation even in case of water turbidity changes
Superior quality, saving costs and space
Specification
Dual gradient design allows creating two distinct filter zones. Larger particles(more than 20 micron) are trapped and filtered out in the first zone and the smaller particles (5 to 20 micron) are trapped in the second zone. It allows the cartridge to operate at higher velocities and lower pressure drop.
The filters are intended to purify water from sediment particles such as rust, sand, scale, silt etc.
Specification
The replacement filter is a roll of fiber polypropylene manufactured by using melt blowing process.
The required degree of rigidity is achieved without using a core by melting fibers into a rigid structure.
Ecosoft PURE reverse osmosis filters combine innovative technologies with natural processes to deliver delicious water with a consistent mineral balance. Ecosoft PURE Balance system offers a cost-effective and environmentally friendly solution for enjoying pure, mineral-rich water with natural calcium and magnesium. It also reduces PFAS content by 99%, providing you with safer, healthier water.
Key Features
Balance technology enhances water with natural calcium and magnesium for freshness and health
AquaGreen technology reduces water waste with a 50% recovery rate, ensuring economical and eco-friendly operation
Maintains optimal mineral content in water at 60-80 ppm
Reverse osmosis ensures safe, contaminant-free water, suitable for all ages
Easy installation without kitchen modifications
Supports horizontal and vertical installation
Compact packaging for easy online shopping and delivery
NSF/ANSI 58 certified components guarantee the safety of the materials used in the filters (plastic components are BPA-free)
How it Works
Ecosoft PURE Balance reverse osmosis system ensures top-tier water purification by utilizing a multi-stage filtration process. Each step plays a vital role in removing impurities and enriching the water for safe and delicious consumption. Here's a detailed look at how it works:
1. Mechanical prefiltration (sediment cartridge)
The first stage traps large particles like sand, silt, and rust, protecting the system from potential blockages and damage.
2. Carbon filtration (activated carbon cartridge)
This stage removes chlorine and its compounds, improving water taste and odor while protecting downstream filtration elements from chemical degradation.
3. AquaGreen cartridge
A specialized filtration step designed to shield the reverse osmosis membrane by reducing the buildup of scaling substances, thus extending the system’s lifespan and ensuring efficient operation.
4. Ecosoft reverse osmosis membrane
The heart of the system, this membrane removes up to 99.8% of dissolved contaminants, including heavy metals, nitrates, pesticides, bacteria, and viruses, providing water of the highest purity.
5. Balance cartridge (mineralization)
This vital stage enriches the purified water with essential minerals like calcium and magnesium, creating a balanced, pleasant taste while supporting healthy hydration.
6. Carbon postfilter (taste enhancement)
The final stage polishes the purified water, further improving its taste and smell for an enjoyable drinking experience.
Through these carefully engineered filtration stages, the PURE Balance reverse osmosis filter delivers safe, clean, and mineral-rich water directly to your tap, ensuring the best hydration experience for your family.
Specification
System components
Filter housing with pre-filters
Membrane element 75 GPD (280 LPD)
Ecosoft carbon post-filter for reverse osmosis filter
Balance mineralization filter
"Modern" ball valve faucet for purified water
Plastic pressure tank (total vol. 12 L, usable vol. up to 7 L, BPA-free) and tank valve
Feed water adapter, feed valve, drain saddle
Pack of color tubes (4 pcs) for convenient filter installation
Service wrenches
User manual
Filtration technology
Dual gradient density sediment replacement filter.
Granular Activated Carbon (GAC) coconut shell filter.
AquaGreen filter for efficient water recovery and reduced waste.
75 GPD RO membrane element.
Balance mineralization filter for consistent calcium and magnesium levels.
Coconut shell carbon post-filter for enhanced taste and odor removal.
Quality of mineralized water*
pH: 7-8.5
Total mineral content: 60-80** ppm
Calcium: 10-15 ppm
Magnesium: 4-6 ppm
Sodium + potassium: <5 ppm
Hydrocarbonates: 30-60 ppm
Chlorides :<5 ppm
* The indicators are determined under the following conditions: inlet water temperature is 20 °С, outlet water composition and filter operation parameters correspond to the recommended by the manufacturer, water consumption intensity is appropriate for a family of three. When the inlet water temperature decreases in winter, the mineral content in the treated water may be lower, and when the temperature increases in summer, it may be higher.
** After one hour or more standing time, the mineral concentration in the first glass of water may exceed the stated value.
Source water requirements
pH: 6.5–8.5
Total dissolved solids: ≤ 1500 ppm
Hardness: <500 ppm CaCO₃
Chlorine: ≤ 0.5 ppm
Total iron: ≤ 0.3 ppm
Manganese: ≤ 0.1 ppm
Chemical oxygen demand: ≤ 5 ppm O₂
Total microbial count (TMC): ≤ 50 CFU/100 ml
Coliform index: ≤ 3
Elevate your hydration experience with Ecosoft PURE Balance. Designed for use with Ecosoft PURE Balance reverse osmosis systems, this cartridge set ensures your water is not only clean but also perfectly balanced and refreshing.
Specification
FILTRATION TECHNOLOGY
5 micron sediment PP filter removes large particulates of silt, sand and rust
Granular activated carbon (GAC) filter reduces content of chlorine, chlorinationbyproducts and natural organic matter
Filter with AquaGreen technology protects membrane element
Balance filter enriches pure water with calcium and magnesium
Coconut shell carbon post-filter improves taste and odour of the purified water
