Commander probes, 4 wire cable, for Commander, Pacific and Atlantic: D0243C: For mg/l and % saturation measurements. Also measures temperature
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.
The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”.
OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today.
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.
The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”.
OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today.
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
OxyGuard Polaris C CO2
The OxyGuard Polaris C CO2 meter is a robust and durable device designed to accurately monitor carbon dioxide levels in various environments. Whether used in industrial settings, laboratories, or greenhouses, this state-of-the-art meter provides precise measurements to ensure optimal conditions for plants, animals, and humans.
Accurate CO2 Monitoring
Equipped with advanced sensors, the OxyGuard Polaris C CO2 meter delivers accurate and reliable readings of carbon dioxide levels. With a user-friendly interface and easy-to-read display, users can quickly assess the data and make necessary adjustments to maintain ideal CO2 levels for improved productivity and overall well-being.
Durable Design
Constructed with high-quality materials, the OxyGuard Polaris C CO2 meter is built to withstand the rigors of daily use. Its durable design ensures long-lasting performance and dependable operation, making it a valuable tool for professionals seeking efficient and effective CO2 monitoring solutions.
Hand-held oxygen and temperature meter with NFC and Bluetooth technology
The Polaris C LDO Optical meter is an almost maintenance free meter for measuring dissolved oxygen and temperature. The meter is sturdy, easy to use and has an extensive longevity making it ideal for harsh conditions.Polaris C LDO can store up to 2500 complete set of data, including time and date stamps. The logged data can be stored either manually or automatically with the possibility to group the data into categories.
The stored data can be uploaded directly to Cobália using Bluetooth technology. Scan the Cobália NFC tag on the tank and all data will be uploaded to your “digital farm”. Tank specific data assigned to the tags will be stored in Cobália for analysis on temporal variation, generation of graphs and for multivariable analysis on performance.
The meter has a built-in self-check of all hardware, it compensates automatically for barometric pressure and it has a notably short response time. With this meter, you get the high-quality associated with OxyGuard technology and a product that will serve you well for many years.
OxyGuard Polaris C pH Meter
The OxyGuard Polaris C pH Meter is a robust and durable device designed to accurately measure pH levels in various applications. With its high-quality construction, this pH meter can withstand harsh conditions and provide reliable readings for your testing needs. Whether you are working in a laboratory, industrial setting, or outdoor environment, the OxyGuard Polaris C pH Meter is the perfect tool for precise pH measurement.
Accurate pH Measurement
Equipped with advanced technology, the OxyGuard Polaris C pH Meter ensures accurate and consistent pH readings every time. Its user-friendly interface allows for easy operation, making it ideal for professionals and beginners alike. Whether you are monitoring water quality, testing soil samples, or conducting research experiments, this pH meter delivers reliable results that you can trust.
Long-lasting Performance
Designed to last, the OxyGuard Polaris C pH Meter is built to withstand the rigors of daily use. Its durable construction and high-quality components make it a reliable tool for long-term pH measurement. With proper care and maintenance, this pH meter will continue to provide accurate readings for years to come, making it a valuable investment for your testing needs.
The OxyGuard Polaris C Redox is a hand-held, pocket-size pH meter designed for use in demanding, wet environments for heavy-duty use. The meter itself and the electrode assembly are waterproof. This instrument does not suffer from the classical problems associated with pH/Redox meters – this Redox meter is sealed so that water cannot enter the top of the electrode or the electronics. You can drop it into the water without damaging it. In the Polaris C Redox these advantages are combined with microprocessor technology to provide an instrument that is exceptionally easy to use.
Measuring Range: +/- 1500 mV
The Polaris C Salinity is a hand-held instrument specially designed for aquaculture use. Factory calibration and automatic temperature compensation make it very easy to use. The display shows the salinity directly. Temperature is also measured and shown in the display.
The instrument incorporates automatic check functions to ensure reliability. The probe is designed to be as trouble-free as possible, with features specially suited for aquacultural use. Inductive technology is used so that you don’t have to worry about deposits on the surface of the probe – all you have to do is ensure that the hole in the probe is open and relatively clean.
The OxyGuard Polaris C TGP (Total Gas Pressure) is a hand-held gas pressure meter. It can operate in three modes, one where it acts as a standard Handy Polaris dissolved oxygen (DO) meter, one where it is a total gas pressure meter that shows pressures as percent saturation values and one where it is a total gas pressure meter that shows pressures as volume percentages.
The user can choose which value is shown in large figures in the display. This can, for example, be the percent saturation value for gases other than oxygen.
The instrument incorporates a data logger. Messages on the display, and menu functions, make the Polaris C TGP easy to use.
Marlin is a single-channel measurement transmitter instrument explicitly designed for use in aquaculture.
One of the critical advantages of Marlin is its water resistance, which means it can be used in various wet environments without fear of damage.
You can order Marlin with the probe of your choice to meet your specific needs:
Dissolved oxygen (electrochemical or optical)
Carbon Dioxide (CO2)
pH/Redox
Total Gas Pressure (TGP)
Temperature
Salinity
Ozone
Any other probe with 4-20 mA input (e.g. Model 420)
Compatibility:
Marlin features a 4-20mA output and MODBUS/TCP for PLC/SCADA compatibility, making integrating your existing systems easy.
It is also Cobália compatible, ensuring seamless communication with the Cobália digital management system.
Whether running a commercial aquaculture operation or simply monitoring the water quality in your backyard pond, Marlin is the perfect tool!
Download Brochure
Marlin+ is a smart monitoring and control system, available in two versions: Standard and Advanced. This allows you to choose the setup that best fits your needs. Read more in the technical specifications section.
Features:
Up two probe connectionsMeasure multiple parameters at once
Wi-Fi & BluetoothFast setup and easy data access
4.3″ colour touchscreenIntuitive and user-friendly
Pre-configured standard setupsPlug & Play configurations for feeding, aeration etc.
Automation-ready4 relays, 4 I/O, Modbus/TCP, 24 VDC or PoE
Weatherproof designReliable performance in tough environments
Cobália compatibleIntegrate with OxyGuard’s farm management platform
Marlin+ is a smart monitoring and control system, available in two versions: Standard and Advanced. This allows you to choose the setup that best fits your needs. Read more in the technical specifications section.
Features:
Up two probe connectionsMeasure multiple parameters at once
Wi-Fi & BluetoothFast setup and easy data access
4.3″ colour touchscreenIntuitive and user-friendly
Pre-configured standard setupsPlug & Play configurations for feeding, aeration etc.
Automation-ready4 relays, 4 I/O, Modbus/TCP, 24 VDC or PoE
Weatherproof designReliable performance in tough environments
Cobália compatibleIntegrate with OxyGuard’s farm management platform
Marlin+ is a smart monitoring and control system, available in two versions: Standard and Advanced. This allows you to choose the setup that best fits your needs. Read more in the technical specifications section.
Features:
Up two probe connectionsMeasure multiple parameters at once
Wi-Fi & BluetoothFast setup and easy data access
4.3″ colour touchscreenIntuitive and user-friendly
Pre-configured standard setupsPlug & Play configurations for feeding, aeration etc.
Automation-ready4 relays, 4 I/O, Modbus/TCP, 24 VDC or PoE
Weatherproof designReliable performance in tough environments
Cobália compatibleIntegrate with OxyGuard’s farm management platform
The Model 420 is a membrane covered galvanic oxygen probe with built-in two-wire 4-20 mA transmitter. The probe is connected to a DC supply and draws a current of between 4 and 20 mA corresponding to the oxygen concentration.
There are only two wires to connect, and there is no limit to cable length. The output signal is galvanically isolated from the built-in electronics and the process fluid. Interference between the Model 420 and other equipment can never occur!
The OxyGuard Model 420 can therefore be connected directly to a wide range of equipment that can accept a 4-20 mA input, such as alarms, indicators, controllers, recorders, PLC’s, PC systems with A/D input etc.
The Model 420 can also be used to measure gaseous oxygen concentration.
D033 OxyGuard Model 420 DO Probe for 4-20mA
OxyGuard's developed ozone sensor is designed specifically for use in aquaculture. The sensor uses an entirely new innovative technology, and the partial pressure of ozone is measured directly without the use of electrolyte, reagents, light, or other traditional methods. As a result, there is almost no maintenance, the probe is exceptionally stable, and the response time is extremely fast.With the possibility to measure ozone content in the water down to only a few μg/L, it is possible to ensure safe conditions for the stock.
Unit of Measurement: ppm (mg/l)Measuriing Range (Low): 0-0.8mg/l (best between 0 and 0.5)Mesauring Range (High): 0.5-8mg/lOperating Temperature: 0-40CDimensions: 40 x 104mmCable Legnth: 7mResponse Time: 90% in less than 45s (for the low range type)Medium: WaterInstallation: For use with Pacific or Marlin
G20 OxyGuard Ozone Sensor Data Sheet
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today. Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
DescriptionThe measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”. OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today. *Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
These OxyGuard probes consist of an electrode and an impedance converter inside a twopart housing held together by a threaded collar. There is extra sealing so that the connections at the top of the electrode remain dry even when the probe is completely submersed. The impedance converter immediately over the electrode eliminates electrical noise problems and permits the use of ordinary cable to connect the probe. Either lightduty or heavy duty OxyGuard pH or redox electrodes with flange fittings can be used.
As standard probes are manufactured from PVC (for temperatures up to 60°C), but on request they can be supplied in other materials, e.g. PP for up to 10 bar at 25 °C, 4 bar at 90 °C, or PVDF for up to 6 bar up to 100°C, 2 bar at 120°C.
There are three basic designs, one for free mounting, one with a 3/4″ tee for flow-through use, the third designed to be screwed into a pipe, flange or other suitable fixture. The probes can be ordered with a 1″ thread at the top of the top part for mounting purposes. OxyGuard also manufacture probes to customer specification, so please ask if you cannot use a standard design. As standard the probes have 7m cables.
For Heavy Duty use in very dirty environments probes can be supplied with a probe cleaning system. This has, for example, proved effective when measuring agricultural slurry – add “C” to ordering number. Several types of mounting device are also available. These are described in separate brochures.
K01 OxyGuard Static pH / Redox Probe
High-quality pH7 calibration solution
Oxyguard pH7 Buffer is the ideal choice for calibrating and testing pH meters and probes. This premium calibration solution ensures accurate results every time, giving you peace of mind during your experiments or testing procedures. With a pH level of 7.00, this buffer solution is formulated to bring your pH meter back to its original factory settings, ensuring precise and reliable measurements.
Easy-to-use formula for hassle-free calibration
With Oxyguard pH7 Buffer, calibrating your pH meter is quick and effortless. Simply immerse your probe into the solution and adjust the readings accordingly to achieve accurate results. This buffer solution is easy to use, making it perfect for both beginners and experienced professionals in the field. Say goodbye to complicated calibration procedures with our convenient pH7 buffer solution!
Reliable and consistent results guaranteed
When it comes to pH calibration and testing, trust Oxyguard pH7 Buffer to deliver reliable and consistent results. Our high-quality formula ensures that your pH meter remains accurate and precise, providing you with the confidence you need in your lab or testing environment. Whether you are conducting research or performing routine measurements, Oxyguard pH7 Buffer is the perfect solution for all your calibration and testing needs.
Hand-held oxygen and temperature meter with NFC tags and Bluetooth technology for easy data transfer to Cobália.
The Polaris C DO meter is a high-performance, low-cost and almost maintenance-free meter for measuring dissolved oxygen and temperature. The meter is sturdy, easy to use and has an extensive longevity making it ideal for harsh conditions.
Polaris C DO can store up to 2500 complete data sets, including time and date stamps. The logged data is stored in the meter or can be transferred to Cobália using Bluetooth.Scan the Cobália NFC tag of the tank and all data will be uploaded to your “digital farm”. Tank specific data assigned to the tags will be stored in Cobália for analyses on temporal variations, multivariable analyses on performance and for the generation of graphs.
The meter has a built-in self-check of all hardware, automatic barometric pressure compensation and a notably short response time. With this meter, you get the high-quality associated with OxyGuard technology and a product that will serve you well for many years.
Instruction Manual
The OxyGuard Polaris C MaxiTemp is a small electronic thermometer specially designed to meet the demands of fish farmers and other professional people for a rugged, reliable and accurate thermometer with data logging function. It has a measuring range of -5 to +45°C with an accuracy of +/- 0.1°, and will measure up to +60°C with an accuracy of +/- 0.2°C. The probe is manufactured in plastic and sea-water resistant stainless steel, and is connected to the display with a 1.5 m cable. Both probe and display are sealed and waterproof.
Values can be stored either automatically at preset time intervals, or manually. You can group values according to the place of measurement. Stored values can be transferred to a PC using the Polaris Link, which connects to the PC via a USB cable.
Pond Master monitors and controls oxygen levels in pond-based aquaculture systems.
Pond Master is specifically designed for monitoring and control of oxygen levels in aquaculture facilities such as shrimp farms, carp farms, and other installations with individual ponds.
This unique instrument incorporates advanced technology with an attractive, compact design resulting in a combination of user-friendly operation, accuracy, low maintenance needs and affordability.
Probe not included
Download Brochure
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.
The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”.
OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today.
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
The OxyGuard Salinity Probe is specially designed for aquaculture use. Factory calibration and automatic temperature compensation make it very easy to use. It is found in two versions. One is a 3-wire 4-20 mA sensor – connect it to 24 VDC and the output varies between 4 and 20 mA according to the salinity. The other has data bus connection for use with OxyGuard Pacific.
The probe is designed to be as trouble-free as possible, with features specially suited for aquacultural use. Inductive technology is used so that you don’t have to worry about deposits on the surface of the probe – all you have to do is ensure that the hole in the probe is open and relatively clean.
The probe measures salinity according to the internationally agreed PSS-78 scale (Practical Salinity Scale 78).
The OxyGuard Salinity Probe is specially designed for aquaculture use. Factory calibration and automatic temperature compensation make it very easy to use. It is found in two versions. One is a 3-wire 4-20 mA sensor – connect it to 24 VDC and the output varies between 4 and 20 mA according to the salinity. The other has data bus connection for use with OxyGuard Pacific.
The probe is designed to be as trouble-free as possible, with features specially suited for aquacultural use. Inductive technology is used so that you don’t have to worry about deposits on the surface of the probe – all you have to do is ensure that the hole in the probe is open and relatively clean.
The probe measures salinity according to the internationally agreed PSS-78 scale (Practical Salinity Scale 78).
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.
The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”.
OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today.
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
OxyGuard temperature probes are robust, accurate and easy to use. They are filled with a special compound that protects against moisture. As standard the probes are fitted with 7 m cable, but they can be supplied with other lengths on request. The sensor in both types of probe consists of a stainless steel cylinder containing the thermistor or Pt100 element. This sensor tip is fitted to a black plastic housing. Standard types of housing are shown overleaf, but others can be supplied on request, e.g. to fit other pipe threads or fittings.
The OxyGuard TGP probe measures Total dissolved Gas Pressure and is designedspecifically for use with OxyGuard Commander or Pacific systems. It can be addedto existing systems. It contains sensors for dissolved gas pressure and temperature.The gases dissolved in water consist of oxygen and “other gases”. “Other gases” aremainly nitrogen. It is important to measure if the water is supersaturated in order toprevent the fish from getting gas bubble disease.
The Commander or Pacific system to which the probe is connected uses a dissolvedoxygen measurement made by a DO probe placed near the TGP probe forcalculations and presents the degrees of saturation for the total gas, dissolvedoxygen and for “other gas”.
F01 OxyGuard Total Gas Pressure probe
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.
The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”.
OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today.
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
Pentair plastic - filter housings are the accepted world standard for high quality, performance and economy. Offering the most comprehensive range of vessels, they are constructed for long life, durability, ease of use and are available in a variety of materials for specialist applications. Meeting internationally recognised technical standards, Pentair test continually throughout production, enabling them to guarantee their products for the recommended application. To ensure quality is not compromised, only virgin materials are used during manufacturing with polypropylene and styrene-acrylonitrile (SAN) vessels being FDA compliant.
Upgrade your water filtration system with the PBR-410-BKBASKET, a Pentair 10" Basket designed specifically for use with PBH-410 Bag Housing (155374-03). This high-quality component ensures efficient filtration and a reliable performance, making it essential for maintaining optimal water quality.
Key Features and Benefits:
Durable Construction: Made with robust materials to ensure long-lasting use, even under demanding filtration conditions.
Perfect Compatibility: Specifically engineered for PBH-410 Bag Housing systems to ensure seamless integration and maximum efficiency.
Efficient Filtration Support: Provides reliable support for bag filters, optimizing their performance in capturing impurities and delivering cleaner water.
Hassle-Free Replacement: Designed for easy installation, making the process of upgrading or replacing your existing basket quick and straightforward.
Trusted Quality: Supplied by GAPS Water Treatment, a reputable provider of premium water treatment components to enhance your system's reliability.
Whether you're operating a residential or commercial water filtration system, the PBR-410-BKBASKET ensures unparalleled performance and durability. Its innovative design and compatibility with the PBH-410 Bag Housing make it a smart choice for anyone looking to enhance their water treatment setup.
