The FlexiMount and FlexiMount XL are pole and surface mount accessories that accommodate both vertical and horizontal pole mounting applications, as well as basic flat wall mounting where minimizing the distance of the radio, relative to the wall, is important. Compared to the FlexiMount, the FlexiMount XL boasts a stronger, more heavy-duty design, a longer pole length and base, and an increased articulation angle of 180º. FlexibleSuitable for vertical, horizontal, and angled poles, Mimosa's FlexiMounts are able to be mounted in any orientation. Ready-to-UseMimosa’s FlexiMounts come preassembled, right out out the box. They are ready for any backhaul, access point, or radio to be attached to them. Compatible with C5x + N5-X25 antenna  Product Specifications: Weight: 0.60 kg (21.3 oz) Mounting Base: 45mm (1.77“) x 127mm (5.0“) Pole Length: 190mm (7.5“) Pole Outside Diameter: 38mm (1.5“) Articulation Angle: 180° Mounting Options: Pole mount with two pipe clamp, or surface mount with two screw hole points Assembly: Pre-assembled with a white powder coated finish; Mounting screws and pipe/hose clamps not included Recommended For: C5x + N5-X25 antenna

Read more less

This 24 V Power-over-Ethernet (PoE) injector is designed for a clean installation in any environment. Supporting many country-specific plugs and power options, which are sold separately, Mimosa's PoE is the best power solution for your wireless installations. Supports the A5x, C5x, and C5c. Product Features: Output Voltage: 24V 1.2A Max. Current Load: 1.5A (12W) Input Voltage:      100VAC - 240VAC ~ 50Hz / 60Hz      Max. 0.75A Input Current: 0.5A @ 90 VAC Gigabit LAN: Yes, (2) RJ-45 Product Specifications: Input Frequency: 47Hz - 63Hz Max In-Rush Current: 70AVAC @ 230VAC Protection: Over Current; Over Voltage Efficiency: 82+% - Level VI RJ-45: Metal-shielded AC Connector: IEC-320 C6 (3 Pin Inlet) Operation Indicator: 1 LED (Blue) Operating Temperature: 0°C to +40°C Operating Humidity: 10% to 90% non-condensing Storage Temperature: -20°C to +80°C (-4°F to 176°F) Product Includes: (1) 24V Mimosa PoE Injector

Read more less

Mimosa A5x Connectorized 4.9-6.4GHz 2x2 PTMP Access Point The Mimosa A5x PTMP 4x4 Access Point is a connectorized, 2x2 access point that delivers fibre-like speeds of up to 700Mbps (IP). With new spectrum becoming available in both 4.9GHz and 6GHz, the wide frequency of the A5x (4.9GHz – 6.4GHz) will allow affordable access to more low-noise spectrum for increased speeds and reliability—especially paired with SRS (GPS sync) for channel reuse. Mimosa A5x Key Features Fibre Speeds of up to 700Mbps (IP) Add Subscribers with Ease Increased Capacity at Each Site Ultra-High Client Capacity Extended Frequency Available With fast client speeds and great access point capacity, along with local and network-wide spectrum reuse, the cost-effective, connectorized A5x delivers fibre-fast connectivity for any unlicensed Fixed Wireless network. The A5x is well suited for short to long-range pole and tower point-to-multipoint (PTMP) applications, access point colocation (GPS sync), and Municipal and Rural Licensed Public Safety multipoint (4.9 GHz). In situations where the A5c connectorized 4x4 access point is too much or too powerful, the A5x is the perfect choice. Fibre Speeds With access point capacity of up to 700 Mbps (IP), the A5x delivers the speeds consumers and business users demand at a fraction of the cost of delivering fibre-to-the-premises. Increased Capacity at Each Site With integrated, high-precision SRS (GPS sync) technology, new A5x sectors can easily be added at existing A5 and B5 sites and reuse the same channel. This saves valuable, scarce unlicensed spectrum resources when new A5x devices are installed ``back-to-back'' on the same tower or pole. Add Subscribers with Ease Install, aim and go! We've eliminated manual installation and pre-provisioning complexity, so you can focus on adding subscribers quickly. Ultra-High Client Capacity TDMA techniques provide significant improvements when scaling the number of clients. By dynamically allocating upstream timeslots upon client request, network scale, spectrum efficiency and access point utilization are optimized to the highest degree possible. Extended Frequency Available Rise above the noise with available extended frequency support from 4.9-6.4 GHz. Product Features: Fiber Speeds of up to 700Mbps (IP) Add Subscribers with Ease Increased Capacity at Each Site Ultra-High Client Capacity Extended Frequency Available Product Specifications: Gigabit Ethernet: 10/100/1000-BASE-T Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio Management Services: Cloud monitoring and provisioning; SNMPv2c/v3; Syslog; HTTPS; HTML 5 based Web GUI; REST API for monitoring and configuration; IPv4 and IPv6 Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels (no service impact); Dynamic auto-optimization of channel and bandwidth use Security: WPA2; AES; RADIUS; 802.1x authorization VLANs: Per SSID VLANs (IEEE 802.1Q) QoS: Supports 4 user-configurable QoS levels for SRS (GPS Sync) (CBWFQ); Behavior Aggregate (BA) and CoS Classifier, with user-configurable precedence GPS Location: GNSS1 (GPS + GLONASS) Weight: 0.30 kg (0.70lbs) Enclosure Characteristics: Outdoor UV-stabilized engineered polymer with integrated mounting back Mounting: Single pole strap and slip on mount for comparable antennas Connector Type: (2) RP-SMA Max Throughput: Up to 700Mbps (IP) Client Capacity: 64 clients (WiFi Interop);, 44 clients (SRS/GPS sync) Wireless Protocols: WiFi Interop, Spectrum Reuse Synchronization (SRS/GPS sync) MIMO & Modulation: 2x2:2 MIMO OFDM up to MCS9 (256-QAM) Bandwidth: 20/40/80 MHz channels; Tunable in 5 MHz increments for GPS Sync; Tunable to standard WiFi channels for WiFi Interop Frequency Range: 4900–6400 MHz (restricted by country of operation) Max Output Power: 27 dBm Sensitivity (MCS 0): -87dBm @ 80MHz,  -90dBm @ 40MHz, -93dBm @ 20MH Max Power Consumption: 9W – 12.9W System Power Method: Passive PoE (24–56VDC) System Lightning & ESD Protection: 6kV PoE Power Supply: Passive POE compliant, 24VDC – 56VDC (PoE injector not included) Environmental: Outdoor Ingress Protection Rating: IP67 Operating Temperature: -40°C to +55°C (-40°F to 131°F) Operating Humidity: 5 to 100% condensing Operating Altitude: 4,420 m (14,500’) maximum Shock & Vibration: ETS 300-019-2-4 class 4M5 Product Includes:(1) Mimosa A5x Radio(1) User Manual

Read more less

The Mimosoa N5-45x2 Sector Antenna is the industry’s first sector antenna to deliver the best of both worlds — incredible noise rejection and long-distance performance, with wideband 4.9–6.4 GHz operation for fixed wireless broadband. The dual-slant polarization, 45º sector can be used with any third-party 2x2 MIMO radio solution, or two N5-45x2 antennas can be connected to the 4x4 MIMO Mimosa A5c access point, aimed in different directions, for 2x spectrum reuse, superior range and noise rejection at collocation and tower sites. Key Features Industry-Leading Front-to-Back Ratio for 2x Spectrum Reuse World-Class Noise Rejection High-Gain for Long Distances Wideband 4.9–6.4 GHz Sector Reject Noise and Synchronise Overcoming noise at tower sites is key to scaling capacity. The N5-45x2 delivers industry-leading side lobe rejection and an unprecedented 43 dB front-to-back (FTB) performance — the highest FTB ratio of any sector or horn antenna in the industry. Compatible with any third-party, 2x2 MIMO radio solution, there’s no higher performance antenna in the industry. Wideband Operation Supporting 4.9 GHz public safety applications and multipoint licensed operation up to 6.4 GHz, where regulations allow, the N5-45x2 provides an additional 800 MHz of spectrum beyond the crowded 5.15–5.85 GHz unlicensed channels. Go the distance The Mimosa N5-45x2 offers the best of both worlds — a long distance, high gain sector with the superior noise isolation of a horn. Competitive sectors offer high-gain, but fail to reduce side lobe and front-toback noise. Symmetric horn antennas achieve good noise isolation, but typically offer lower gain and inefficient symmetrical ground coverage patterns. Compatible with Third-Party Radios Blending the best of sector antennas with the best features of a horn, the Mimosa N5-45x2 is a great sector antenna choice to use with any 2x2 MIMO radio. Even better, the ultra-wide 9º vertical beamwidth covers substantially more ground than other leading sector antennas. Product Features: Industry-Leading Front-to-Back Ratio for 2x Spectrum Reuse World-Class Noise Rejection High-Gain for Long Distances Wide-band 4.9GHz – 6.4GHz Sector Antenna Specifications: Gain: 19dBi Polarization: Slant 45° Azimuth Beamwidth (3 dB): 42° Elevation Beamwidth (3 db): 9° Electrical Downtilt: 2° Front-to-Back Ratio (min): 43dB Cross-Polar Isolation: >30dB Port-to-Port Isolation: >10dB Impedance: 50 Ω Max Input Power: 30dBm Physical Specifications: Dimensions:  Height: 427mm (16.81”)  Width: 143mm (6.63”)  Depth: 76mm (3.0”) including connectors Shipping Box Dimensions:  Height: 662mm (26.06”)  Width: 166mm (6.53”)  Length: 100mm (3.94”) Weight: 2.81kg (6.2lbs) RF Connectors: 2 N-type female (includes two 1 meter LMR 240 Type-N to Type-N cables) RF Connectors Position: Back of antenna, near center Enclosure Characteristics: Outdoor, UV stabilized, engineered polymer Mounting: Galvanized steel, dual attached pole mount with 20° mechanical up or down tilt. Two mounting brackets included. For pole sizes, maximum is 3.5” (90 mm) and minimum is 1.5” (38 mm). Wind Survivability: 200 km/h (125 mph) Wind Loading: 4.77 kg @ 160 km/h (10.49lbs @ 100 mph) Environmental: Outdoor Ingress Protection Rating: IP55 Operating Temperature: -40°C to +55°C (-40°F to 131°F) Operating Humidity: 5 to 100% condensing Operating Altitude: 4,420 m (14,500’) max Shock & Vibration: ETS 300-019-2-4 class 4M5 RoHS Compliance: Yes Product Includes:(1) N5-45x2 Sector Antenna(1) User Manual(2) Mounting Brackets

Read more less

The Mimosa B5x is one of the industry’s fastest unlicensed, point-to-point (PTP), backhaul solutions. It’s ideal for short to medium range relay and tower links, custom-engineered collocation, and licensed 4.9 GHz spectrum. It’s modular, with the ability to connect X-series compatible twist-on antennas (12 dBi horn, 16 dBi horn, 20 dBi dish, 25 dBi dish). Mimosa B5x Key Features Wide Frequency Range Beamforming Technology Optimised 360º Performance Fast and Flexible As one of the highest capacity, unlicensed PTP solutions in the industry, it delivers up to 1.5 Gbps (IP). 160 MHz of aggregate channel capacity and GPS Sync mode provide flexibility for performance. Double Reliability Tame unlicensed spectrum interference via custom-engineered multi-channel and auto-everything technology—as good as two smart links in one radio. Extended Frequency Rise above the noise with extended frequency support from 4.9–6.4 GHz. Ultra Rugged Carrier-grade IP67 design allows the B5x to withstand the harshest of environmental conditions. Easily Add New Links The B5x is spectrum friendly. Unique, high-precision GPS Sync technology reuses the same channel network wide. Keep adding more capacity to more sites and waste less spectrum. Monitor With Ease Assessing link health and identifying potential problems has never been easier. Links are instantly monitored from the Mimosa management platform. Product Features: As one of the highest capacity, unlicensed PTP solutions in the industry, it delivers up to 1.5Gbps (IP). 160MHz of aggregate channel capacity and GPS Sync mode provide flexibility for performance. Tame unlicensed spectrum interference via custom-engineered multi-channel and auto-everything technology—as good as two smart links in one radio. Rise above the noise with extended frequency support from 4.9GHz – 6.4GHz. Carrier-grade IP67 design allows the B5x to withstand the harshest of environmental conditions. The B5x is spectrum friendly. Unique, high-precision GPS Sync technology reuses the same channel network wide. Keep adding more capacity to more sites and waste less spectrum. Assessing link health and identifying potential problems has never been easier. Links are instantly monitored from the Mimosa management platform. Product Specifications: Max Throughput: Up to 1.5Gbps IP aggregate UL/DL (1.7Gbps PHY) Latency: <1ms in auto mode Wireless Protocols: Fixed TDMA and TDMA-FD (Frequency Diversity) with 75:25,m67:33, or 50:50 traffic ratios with 2, 4, or 8ms timeslots; Auto-TDMA MIMO & Modulation: 4x4:4 MIMO OFDM up to 256QAM Bandwidth: Single or dual 20/40/80 MHz channels Frequency Range: 4.90GHz – 6.40GHz; Restricted by country of operation Max Output Power:      30dBm (1x mode, i.e. single frequency)      27dBm (2x mode, i.e. dual frequency) Sensitivity (MCS 0):      -87dBm @ 80MHz      -90dBm @ 40MHz      -93dBm @ 20MHz Integrated Antenna Gain: 8dBi Max Power Consumption: 20W System Power Method: 48VDC 802.3at (PoE+) active or passive compliant power injectors System Lightning & ESD Protection: 6kV Recommended Power Supply: (not included): 50 VDC passive Gigabit PoE injector Operating Temperature: -40°C to +55°C (-40°F to 131°F) Dual Link Operation: 2 independent dual-stream radios operating on non-contiguous frequencies; Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM Management Services: Mimosa management; SNMPv2 & Syslog legacy monitoring; HTTPS; HTML 5 based Web UI Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels (no service impact); Dynamic auto-optimization of channel and bandwidth use Security: 128-bit AES PSK with hardware acceleration QoS: 4 classes of QoS, with user configurable priority queuing, weighted fair queuing, MIR, CIR, and rate limiting Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated cochannel radios; Adjustable up/downstream bandwidth ratio Regulatory and Compliance: FCC Part 15.407, IC RSS210, CE, ETSI 301 893/302 502 RoHS Compliance: Yes Safety: EN 62638-1, CAN/CSA C22.2 No. 62368-1 Product Includes: (1) Mimosa B5x PTP Backhaul Radio (100-00109)

Read more less