Aquafilter TFC-75F RO membrane. RO membranes consists of many thin layers of porous, semi-permeable film wound around a central core. TFC-x series membranes are compatible with most RO systems available on the market. They effectively remove 96%-99% of suspended particles, most bacteria and viruses, VOCs (not smaller than 0.0001 μm) and even ions. All filtered impurities are flushed to drain. TFC-x series membranes improve overall quality of water. Keep in mind that the performance of the RO membranes depends on water temperature and applied pressure. Low temperature of influent water will affect (lower) membrane performance. Pressure has a similar effect. In such cases, booster pump is required. Aquafilter offers TFCx-F Reverse Osmosis (RO) membrane suitable for POU (Point of Use) installations. TFCx-F membranes consist of many thin layers of porous, semi-permeable film wounded around a central core. Its small pore size (0.0001 micron) allows TFCx-F acting as a barrier against suspended particles, most of bacteria and viruses, ions and VOC’s present in your tap water. Finally, all filtrate impurities are flushed to drain, ensuring a continuous and efficient supply of clean water. TFCx-F membranes are compatible with most RO systems present on the market.
The three-element filter housing 5" FHPR5-12-WB in a set with three linear elements, has a pressure release valve and an O-ring that provide effective protection against leakage. A transparent flask allows you to visually assess the degree of contamination of the cartridge and replace it in time. The pressure relief valve makes it possible to release accumulated air after the cartridge replacement procedure, or to release pressure before replacing it. The design, which consists of 3 elements, guarantees effective sealing of the system, as well as quick replacement of the cartridge. The maximum inlet temperature should not exceed +23 ° C. Therefore, the mud trap flask is made of a special material - polyethylene terephthalate. Operating pressure: up to 6 bar.
The FHPR5-12-WB filter housing is manufactured on the latest equipment in Poland, and only from certified material with NSF and WRAS certification.
The filter housing is used for household filtration systems, and cuts directly into the cold water pipe, which provides protection for the entire water supply system, as well as more expensive water treatment systems. After all, the body of the AQUAFILTER AH-H05A series serves as a so-called barrier to polluting particles.
Aquafilter TLCHF-2T In-line ultrafiltration membrane 0.01 micron cartridge 1/4" NPT. Compatible with most under-counter systems available on the market. Due to the small pore size (0,02 micron) in combination with its unique structure, which decreases from the outside to the inside, the membrane is capable of removing various contaminants such as: sand, silt, rust and other suspended impurities, most bacteria, and some viruses. Large sediment particles are blocked near the capillary surface (surface filtration) and smaller ones flow inside until they are captured by smaller pores (depth filtration). Unlike RO membranes, UF membranes are characterized by zero rejection ratio which in turn leads to quicker and more efficient delivery of clean water. Moreover hollow fiber UF membranes leave beneficial minerals intact. TLCHF-2TF is designed for cold potable water filtration. Aquafilter TLCHF-2TF Ultra filtration membrane. Fits most 1/4” water lines and requires no additional tools for installation.Specifications:
Size: 10" x 2"
Micron rating: 0.02 microns
Filter Life: 6-12 months
Max pressure: 3,5 bar
Min temp.: 2'C
Max temp.: 45'C
The Arvo-Tec T Drum 2000 Feeder has a very high accuracy, whilst remaining at a competitive price. The feeder is multifunctional and is suitable for start feeding in hatcheries to on-growing on tanks, ponds and cages.
1, 6 or 10 litres transparent and 50, 150 or 600 white hoppers Standard motor 24 VAC, 11,3 W, 2 rpm Granule/pellet size 0,3–8 mm Minimum dose of 0,3, 1,5, 20, 45 or 100 g Strong, 316 stainless steel bracketi Accuracy normally greater than 98%
The FLEXEON® LP-Series line pressure RO systems are engineered for the light commercial market's requirement for a pump-less system.Relying solely on line pressure, the LP-Series systems provide lower operational costs and are easy to install and maintain. These systems are designed to be wall mounted and are available in models that produce 1.3m3 and 2.6m3 per day. TDS monitoring and multiple pressure gauges delivering entry level RO system that is simple to install and easy to use.The LP system offers a cost effective solution to producing quality water from tap water supplies below 500 TDS.System configurationNEW AXEON TF-3012-500 membraneNEW AXEON 3012 membrane housingPentair 10" slimline housingsWall mounted corrosion resistant steel coverControlsAutomatic shut off valveFlow restrictorInstrumentsPermeate pressure gaugePost sediment filter pressure gaugeOperational pressure gaugeDual TDS meterTreatment process5µ sediment removal cartridge10µ carbon block pre-filterAXEON TF-3012-500 RO membrane10µ carbon block post-filterDimensions: 7.5" (depth) x 17" (width) x 19" (height)Models available:*LP350 - 1 x TF-3012-500, 3/8" ports, 40% recovery, 55 lph average flow rate at 25°C*, 35 lph at 10°CLP500 - 1 x TF-3012-500 with booster pump, 3/8" ports, 40% recovery, 80 lph average flow rate at 25°C*, 48 lph at 10°CLP700 - 2 x TF-3012-500, 3/8" ports, 40% recovery, 111 lph average flow rate at 25°C*, 67 lph at 10°C**The FLEXEON LP-Series test parameters: 250 TDS filtered (5 micron) feed water, operating pressure 4.8 bar, with a water temperature of 25°
The FLEXEON® LP-Series line pressure RO systems are engineered for the light commercial market's requirement for a pump-less system.Relying solely on line pressure, the LP-Series systems provide lower operational costs and are easy to install and maintain. These systems are designed to be wall mounted and are available in models that produce 1.3m3 and 2.6m3 per day. TDS monitoring and multiple pressure gauges delivering entry level RO system that is simple to install and easy to use.The LP system offers a cost effective solution to producing quality water from tap water supplies below 500 TDS.System configurationNEW AXEON TF-3012-500 membraneNEW AXEON 3012 membrane housingPentair 10" slimline housingsWall mounted corrosion resistant steel coverControlsAutomatic shut off valveFlow restrictorInstrumentsPermeate pressure gaugePost sediment filter pressure gaugeOperational pressure gaugeDual TDS meterTreatment process5µ sediment removal cartridge10µ carbon block pre-filterAXEON TF-3012-500 RO membrane10µ carbon block post-filterDimensions: 7.5" (depth) x 17" (width) x 19" (height)Models available:LP350 - 1 x TF-3012-500, 3/8" ports, 40% recovery, 55 lph average flow rate at 25°C*, 35 lph at 10°C*LP500 - 1 x TF-3012-500 with booster pump, 3/8" ports, 40% recovery, 80 lph average flow rate at 25°C*, 48 lph at 10°CLP700 - 2 x TF-3012-500, 3/8" ports, 40% recovery, 111 lph average flow rate at 25°C*, 67 lph at 10°C**The FLEXEON LP-Series test parameters: 250 TDS filtered (5 micron) feed water, operating pressure 4.8 bar, with a water temperature of 25°
The FLEXEON® LP-Series line pressure RO systems are engineered for the light commercial market's requirement for a pump-less system.Relying solely on line pressure, the LP-Series systems provide lower operational costs and are easy to install and maintain. These systems are designed to be wall mounted and are available in models that produce 1.3m3 and 2.6m3 per day. TDS monitoring and multiple pressure gauges delivering entry level RO system that is simple to install and easy to use.The LP system offers a cost effective solution to producing quality water from tap water supplies below 500 TDS.System configurationNEW AXEON TF-3012-500 membraneNEW AXEON 3012 membrane housingPentair 10" slimline housingsWall mounted corrosion resistant steel coverControlsAutomatic shut off valveFlow restrictorInstrumentsPermeate pressure gaugePost sediment filter pressure gaugeOperational pressure gaugeDual TDS meterTreatment process5µ sediment removal cartridge10µ carbon block pre-filterAXEON TF-3012-500 RO membrane10µ carbon block post-filterDimensions: 7.5" (depth) x 17" (width) x 19" (height)Models available:LP350 - 1 x TF-3012-500, 3/8" ports, 40% recovery, 55 lph average flow rate at 25°C*, 35 lph at 10°CLP500 - 1 x TF-3012-500 with booster pump, 3/8" ports, 40% recovery, 80 lph average flow rate at 25°C*, 48 lph at 10°C*LP700 - 2 x TF-3012-500, 3/8" ports, 40% recovery, 111 lph average flow rate at 25°C*, 67 lph at 10°C**The FLEXEON LP-Series test parameters: 250 TDS filtered (5 micron) feed water, operating pressure 4.8 bar, with a water temperature of 25°
Overview of the Axis Q6075-SE
Delivers HD 1080p resolution video at up to 50 fps
Full pan/tilt functionality with 360° endless pan
40x optical & 12x digital zoom
Lightfinder 2.0 technology
Axis 3-year warranty
Size: Ø224 x 256 mm
This high-performance PTZ dome IP camera is housed in a marine-grade stainless steel casing – making it suitable for use in even the most demanding outdoor environments. The unit captures smooth HD 1080p resolution video at up to 50 frames per second (fps) – 24 hours a day. The camera features full pan/tilt functionality with 40x optical zooming for in-depth scene investigation, while Lightfinder 2.0 and Wide Dynamic Range (WDR) technologies help to improve image capture in challenging lighting conditions. Additionally, the unit contains Axis’ ARTPEC-7 chip, enabling the use of high-performance analytics applications and enhanced security features.
Camera
Variable pan/tilt movements, including an endless 360° pan, allow users to navigate precisely across wide areas. The unit features 40x optical zooming, as well as a 12x digital zoom, for quick in-depth investigation of areas of interest. It is also supplied with an Axis T8067 media converter which allows the connection of external devices to help enhance alarm signalling.
Imaging
Full-colour video is delivered in extreme low-light levels using Lightfinder 2.0 technology, while WDR technology ensures the capture of image details in scenes with high-contrast lighting. Electronic Image Stabilisation (EIS) is also included – helping to produce clear images even when the camera is subject to vibrations.
Video analytics
The intelligent unit features a Machine Learning Processing Unit (MLPU) with Axis Object Analytics built in. This application enables the camera to detect and classify humans and vehicles – making it easier to determine what triggered recording and reducing bandwidth and storage requirements. Autotracking 2 with click and track functionality allows for active object tracking, and camera-based configurable video motion detection methods help to alert users of activity in real-time via notification methods such as email.
Video management
On-board storage provides a backup if the network fails, recording files onto the MicroSD card (not included). Recording to network-attached storage (NAS) devices is also supported for larger storage capacity requirements. In addition, the unit can be easily integrated into high-performance video management systems such as Axis Camera Station and Milestone XProtect. A cloud-based solution can also be implemented through the Morphean Cloud CCTV platform or CamStreamer Cloud.
Installation
Housed in an IP67 and IK10-rated stainless-steel casing with a nylon clear dome cover, the camera is highly resistant to the corrosive effects of seawater and cleaning chemicals. The supplied media converter switch also enables the unit to be connected in a ‘daisy chain’ to the network using standard network or fibre optic cables – reducing costs when installing over long distances.
Please note: this camera does not come with a power supply, please select from the dropdown menu if required.
Key features & benefits
Captures HD 1080p resolution video at up to 50 fps
Full PTZ functionality with 360° pan and 40x optical zoom for responsive scene navigation
IP67 and IK10-rated stainless steel casing protects in extreme environments
True day/night recording enables 24-hour monitoring
Included media converter switch supports fibre connection across long distances and allows external devices to be connected for enhanced alarm signalling
Lightfinder 2.0 technology enables the capture of full-colour images even in near darkness
WDR technology retains image details in high-contrast scenes
EIS helps to provide stable images when the camera is subject to vibrations
Axis Object Analytics pre-installed for the detection and classification of humans and vehicles
Autotracking 2 enables active object tracking
Video motion detection alarms can be configured to help enhance scene awareness and notify users of activity
Integrated edge storage provides a helpful backup of data (microSD card sold separately)
Typical applications
The advanced camera with its extremely robust casing is an ideal choice for deployment in highly exposed areas. Typical applications include ferry terminals, industrial sites and marine depots.
Accessories
Included:
Installation guide
User manual
Windows decoder 1-user licence
Axis T8607 Media Converter Switch
7m IP68-rated multicable
NOTE: Wall Mounting Bracket not included
Spare part for FIAP Belt Feeder
Being spare part for FIAP Belt Feeder, the high-precision movement made from stainless steel with its sapphire bearing is also available separately. We offer FIAP Belt Feeder Clock Unit with a run time of 4, 12 or 24 hours.
