Aquafilter FCCST2 10" Water softening and iron reducing cartridge. Aquafilter FCCST2 cartridges are an effective and efficient solution for point-of-use applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters, preventing media particles from being washed out. Cartridges are available in various capacities to meet Customer demands. FCCST2 was designed to allow optimal contact between water and resin, therefore ensuring maximum performance (ion exchange). FCCST2 utilizes FDA-grade, sodium, based, strongly acidic ion exchange resin which reduces calcium and magnesium ions content and lowers the concentration of iron in water. Calcium and magnesium are often called "hardness minerals". Large amounts of these ions in water are responsible for the formation of the scale deposits, higher detergent consumption and stains on glassware. In extreme cases large amounts of calcium and magnesium can lead to glass etching. Hard water damages home appliances such as: tea kettles, dishwashers and washing machines, and increases their energy consumption. Hard water leaves an invisible film on skin, which blocks pores. This in turns causes chapping, itching and dryness. Iron imparts a disagreeable taste to the water. It can ruin the taste of tea, coffee and beverages. Iron compounds create yellow to dark-brown stains on equipment. Iron salts irritate skin. Water, after passing through FCCST2, is softened and contains almost no calcium & magnesium, as well as iron. It enables people to use lesser quantities of soap, shampoo, and skin care products. Moreover, detergent consumption is reduced. Aquafilter FCCST2 can be used in every POU application where soft water containing no iron is required.Specifications:
Media: FDA approved ion exchange resin
Filter Life: 3 - 6 months
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Our Spectrum 4-stage tankless reverse osmosis system is a compact, high-capacity filtration unit that delivers ultra-pure, alkaline drinking water instantly.
It has a filter accuracy of 0.0001μm, meaning it is highly effective at removing fluoride, limescale, heavy metals, and other harmful contaminants.
Unlike traditional systems with bulky storage tanks, this direct flow RO system uses a built-in booster pump to provide clean water on demand. No waiting, no storage delays.
The tankless design reduces the risk of bacterial build-up and saves more space under your sink.
This product is best used in households or commercial buildings for people looking for cleaner water and lower long-term running costs.
This setup streamlines maintenance and also reduces long-term replacement costs.
It has a flow rate of 2 litres per minute and a near 800GPD capacity, ideal for speed and volume in busy households or commercial spaces.
This model operates with a 1.5:1 pure-to-waste water ratio, which cuts water waste significantly compared to conventional models. It also improves water quality with a post-filtration alkalising stage, raising the pH to a balanced 7.8–8.0.
This makes the water not only cleaner but also more mineral-rich and pleasant to drink.
The Trojan Wiper Seal Kit is a comprehensive solution for maintaining a clean and hygienic environment. The kit is for use with a UV steriliser, designed to eliminate 99.9% of bacteria and germs. The durable wiper seal helps to keep residue and dust at bay while ensuring optimal surface protection.
Aquafilter FCPP series cartridges are made of FDA-approved polypropylene string wound on a polypropylene core which strengthens the cartridge.
It has a broad chemical compatibility, good temperature resistance and low cost.
FCPP series cartridges are primarily used as the first stage of filtration of cold potable water. Cartridges are characterised by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems.Specifications:
Filter media: PP
Core: PP or PET
Nominal micron rating: 5 micron
Min. feedwater temp. 2°C (35º F)
Max. feedwater temp. 65°C (149ºF)
Avg. Efficiency: 90%
Size: 10”
Weight Jarn: 120 g (+/- 5 gMax. Flow: 20 lpm
5x Genuine Aquafilter 10" x 2.5” 1,5,10,20,50 Micron Sediment Removal Water Filter Cartridge FCPS5AQUAFILTER FCPS5 series cartridges are NSF certified using FDA approved polypropylene for material requirements.The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities.FCPSx uses no resin binders, lubricants, anti-static or release agents or other chemical additives.The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene micro-fibres into a complex filter matrix.Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.Polypropylene fibres are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential plumbing systems.FCPSx series cartridges are an ideal true depth filters and can be used for filtration of cold potable water.Aquafilter wide range of melt-blown cartridges has multiple fibre zones.These multi-fibre zones provide a graded pore structure throughout the filter's depth.Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter.The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure.Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs.The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs
Features:
NSF approved product with FDA CFR Title 21 Compliance
85% efficiency at stated nominal micron rating
Multi-layer construction gives true graded depth filtration, high dirt holding capacity and long service life
Constructed from 100% polypropylene without added binders, resins or adhesives
Provides consistently efficient filtration with low inlet pressure
Chemical resistant and prevents development of micro-organisms
Made in the EU with High Quality materials
Specifications:
Filter Media: PP
Min. Feed Water Temp. 2°C (35º F)
Max. Feed Water Temp. 60°C (176ºF)
Length: 10"
Outer Diameter: 2.5"
Avg. Efficiency: 90%
Maximum Flow: 30 lpm
Filter Life: 6 months*
A set of 2 replaceable in-line cartridges for RX-AFRO3-AQ RO system for aquarium. Set includes: AIPRO sediment cartridge and AICRO carbon cartridge (filled with NSF approved coconut shell granulated activated carbon). Cartridges remove sediments such as sand, silt, rust and suspended solids, chlorine, organic substances, certain pesticides. Cartridges protect the membrane from fauling.
A set of 3 replaceable cartridges for FP2 series and RO systems (small servis). Set includes: FCPS5, FCPS20 (both NSF approved) and FCCBL. Cartridges remove sediments such as sand, silt, rust and suspended solids, chlorine, organic substances, certain pesticides and improve the taste and aroma of filtered water.
A set of 3 replaceable cartridges for FP3 series systems. Set includes: FCPS5 (NSF approved), FCCST2, FCCBKDF. Cartridges remove sediments such as sand, silt, rust and suspended solids, chlorine, organic substances, certain pesticides, iron, heavy metals. Using the set it is possible to reduce water hardness and improve the taste and aroma of filtered water. KDF® exhibits bacteriostatic properties inhibiting bacterial growth and therefore protecting the cartridge.
System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.
Flexseal AC2654 adaptor coupling with a shear banded seal, designed for pipe with an outside diameter of 240mm to 265mm and 144mm to 160mm. Manufactured from EPDM rubber, incorporating a Grade 1 304 stainless steel shear band.
AFM® is an inert, amorphous aluminosilicate (glass) manufactured by up-cycling post-consumer green and brown glass bottles.AFM®Activated Filter Media is verified to at least double the performance of sand filters without the need for additional investments in infrastructure. AFM® is used for swimming pools, aquaria and aquaculture as well as water treatment applications - for treatment of various sources of water such as ground water, surface water, seawater and waste water.Dryden Aqua has developed AFM® ng to remove organics and microplastics from the water. Any non polar chemical will be more difficult to dissolve into water and it will tend to float like oil, or be adsorbed on to a non polar hydrophobic surface.Two different types of AFM® are produced in our factories: AFM®s (standard) and AFM®ng (next generation).Both products are exposed to a unique 3-step activation process to become self-sterilising and to acquire superior filtration properties. During the activation, the structure and the chemistry of the glass is modified.Organic matters are the precursor for the formation of Trihalomethanes (THMs), including chloroform. Thanks to its large hydrophobic area and highly mesoporous structure, AFM® ng can filter much finer particles and approximately 50% more organic substances than sand. High filtration performance means less disinfectants are used, result- ing in healthier water and better air quality at lower costs
What is AFM?
AFM is an inert, amorphous aluminosilicate (glass) manufactured by up-cycling post-consumer green and brown glass bottles.
AFM Activated Filter Media is verified to at least double the performance of sand filters without the need for additional investments in infrastructure. AFM? is used for swimming pools, aquaria and aquaculture as well as water treatment applications - for treatment of various sources of water such as ground water, surface water, seawater and waste water.
Dryden Aqua has developed AFM? ng to remove organics and microplastics from the water. Any non polar chemical will be more difficult to dissolve into water and it will tend to float like oil, or be adsorbed on to a non polar hydrophobic surface.
Two different types of AFM? are produced in our factories: AFM's (standard) and AFMng (next generation).
Both products are exposed to a unique 3-step activation process to become self-sterilising and to acquire superior filtration properties. During the activation, the structure and the chemistry of the glass is modified.
Organic matters are the precursor for the formation of Trihalomethanes (THMs), including chloroform. Thanks to its large hydrophobic area and highly mesoporous structure, AFM? ng can filter much finer particles and approximately 50% more organic substances than sand. High filtration performance means less disinfectants are used, resulting in healthier water and better air quality at lower costs
