Milwaukee


  • Milwaukee PH600 Digital pH Pen Handheld Meter Milwaukee

    Milwaukee Milwaukee PH600 Digital pH Pen

    Over 200,000 people have relied on the Milwaukee pH600AQ compact pH pen tester to move from difficult to use and interpret pH strips to digital testing. SUMMARY The Milwaukee pH600AQ compact pen tester is specifically designed to help maintain aquariums and aquaculture. Keeping the proper pH improves results for aquarium fish and quality in a range of fish raised in aqulculture. Use digital accuracy to keep pH in your target range for better results. WHAT PEOPLE ARE SAYING "Accurate results and calibrated right out of the box." "Must have for any aquarium owner." "Good value. Easy to use. Consistent." DESIGN FEATURES Fast, accurate results with digital LCD readout Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes Cap to protect the pH sensor and keep it wet when stored upright Low power demand for extended battery life (batteries included) USE AND CARE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! Here are our top four tips. 1. Always store upright with the cap full of buffer or storage solution MA9015 not water. 2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Pen in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.

    £19.99

  • Milwaukee M10007B pH 7.01 Calibration Solution Sachet Sachet Milwaukee Default Title

    Milwaukee Milwaukee M10007B pH 7.01 Calibration Solution Sachet

    Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month. M10007B is a lab grade pH 7.01 calibration solution certified to meet the standard with an accuracy of ±0.01 pH removing the inaccuracies involved with mixing solutions from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 7.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification

    £1.14

  • Milwaukee pH51 Waterproof pH Tester with Replaceable Probe Pocket Tester Milwaukee

    Milwaukee Milwaukee pH51 Waterproof pH Tester with Replaceable Probe

    The Milwaukee Waterproof pH51 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, pools and many other applications. The Milwaukee pH51 pH tester offers: ACCURACY The Waterproof pH51 tester is accurate to ±0.1 pH and is easy to read. With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results. LONG LIFE The tester comes with a replaceable pH probe with a double junction probe designed for longer life. FAST RESPONSE The probe is double junction allowing quick, accurate pH readings and respose times. WATERPROOF CONSTRUCTION No more worries about dropping your tester while measuring. The pH51 is waterproof to IP65. LIGHT WEIGHT At just 3.5 ounces, the pH51 is easy to handle at up to half the weight of other testers. EASE-OF-USE A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Extreme pH accuracy to ±0.1 pH with a pH range (0.0 pH to 14.0 pH). Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading. Simple manual one or two-point calibration. Gel-filled, double junction pH electrode for low maintenance and high performance. Fully waterproof to IP65. Over 1500 hours of continuous battery life (batteries included). Replaceable pH electrode. CARE AND USE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water. 2. Clean your Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Tester in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.

    £28.81

  • Milwaukee PH55 PRO Waterproof pH & Temperature Tester with ATC Handheld Meter Milwaukee

    Milwaukee Milwaukee PH55 PRO Waterproof pH & Temperature Tester with ATC

    The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select. Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications. The Milwaukee Waterproof pH55 pH/temp. tester offers: ACCURACY The Waterproof pH55 PRO tester is accurate to ±0.1 pH & +/-0.5°C (+/-1°F) and is easy to read. With easy 2 point automatic calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results. LONG LIFE The tester comes with a replaceable pH probe with a double junction probe designed for longer life. FAST RESPONSE The probe is double junction allowing quick, accurate pH readings and respose times. WATERPROOF CONSTRUCTION No more worries about dropping your tester while measuring. The pH55 PRO is waterproof to IP65. LIGHT WEIGHT At just 3.5 ounces, the pH55 PRO is easy to handle at up to half the weight of other testers. EASE-OF-USE A large Dual Level LCD screen with easy-to-read graphic symbols, makes it easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Extreme pH accuracy to ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH). Resolution to 0.1 pH. Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading. Is fully compensated for temperature (ATC). Simple Automatic one or two-point calibration. 2 Sets of pre-memorized buffers. Gel-filled, double junction pH electrode for low maintenance and high performance. Over 300 hours of battery life (batteries included). Fully waterproof to IP65. Replaceable pH electrode Mi56P. CARE AND USE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use! Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water. 2. Clean your Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Tester in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.

    £40.99

  • Milwaukee M10004B pH 4.01 Calibration Solution Sachet Sachet Milwaukee Default Title

    Milwaukee Milwaukee M10004B pH 4.01 Calibration Solution Sachet

    M10004B is a lab grade pH 4.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 4.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification

    £1.14

  • Milwaukee MW500 PRO ORP Meter Handheld Meter Milwaukee

    Milwaukee Milwaukee MW500 PRO ORP Meter

    The Milwaukee MW500 PRO ORP meter is one of Milwaukee's most popular meters with its reliable, fast and simple operation as well as its accuracy. The Milwaukee PRO ORP Meter is preferred by people looking to dial in their testing program when they have an ongoing need to maintain levels. Common uses are aquariums, swimming pools and spas, and other water quality monitoring uses. The PRO ORP meter can also be used to measure sulfur dioxide in wine using the manual Ripper titration method. The Milwaukee PRO ORP meter offers: ACCURACY The PRO ORP meter is accurate to ±5 mV exceeding the needs of most users. TOUGHNESS The rugged meter is designed to take knocks. LOW MAINTENANCE The PRO ORP Meter comes with SE300 ORP probe that is both low maintenance (gel filled) and able to withstand more challenging samples (double junction). DESIGN FEATURES Fast easy to read current results with large digital LCD readout Accurate to ±5 mV Gel-filled, double junction lab grade Platinum ORP electrode for low maintenance and high performance 3 feet probe cable for extra flexibility when testing Low power demand for a 300 hour extended battery life (battery included) USE AND CARE Properly maintaining your ORP probe will give you fast, accurate results for longer. Here are our top three tips. 1. Always store with the cap full of buffer or storage solution not water. 2. Clean your probe regularly by soaking in cleaning solution. 3. Check the probe using MA9020 200 - 275 mV solution to ensure the probe is good. Thank you for considering Milwaukee to help you take your results to the next level.

    £98.72

  • Milwaukee MW600 PRO Dissolved Oxygen Meter Pocket Tester Milwaukee

    Milwaukee Milwaukee MW600 PRO Dissolved Oxygen Meter

    The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy. The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.Please note that this item does not include calibration solutions. DESIGN FEATURES Fast, easy-to-read results with large digital LCD readout Repeatable, accuracy to ±1.5% FS Lightweight and portable Simple 2 point open air calibration (see video below) Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluorethylene (PTFE) membrane sensor 5 O-rings, membranes and one protective cap included 10 feet probe cable for extra flexibility when testing 70 hours of battery life with continuous use (battery included) with low battery warning CARE AND USE “OPEN AIR” CALIBRATION PROCEDURE 1. Remove the membrane Take the membrane off the end of the probe and dry the diode off. 2. Zero out the display Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0. 3. Fill the membrane Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure) 4. Attach the membrane Screw the membrane on to the probe. 5. Let stablize Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes) 6. Adjust Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100. You are now calibrated. EXTRA TIPS Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane. Always use fresh electrolyte solution (MA9071). DOWNLOAD EXCEL WORKSHEET FOR TEMPERATURE COMPENSATION ON MW600 DO METER (XLS) Determine water temperature, insert reading from meter display, and this worksheet will automatically calculate a temperature-compensated DO reading for you.

    £183.49

  • Milwaukee M10010B pH 10.01 Calibration Solution Sachet Sachet Milwaukee

    Milwaukee Milwaukee M10010B pH 10.01 Calibration Solution Sachet

    Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month. M10010B is a lab grade pH 10.01 calibration solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing from powder. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired or contaminated solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 10.01 Calibration Buffer Solution - 20 mL Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light and air Ideal for on-the-spot calibration Simply open, insert the tester or electrode into the sachet and calibrate Formulated with a 5 year expiry Colour coded for easy identification

    £1.14

  • Milwaukee MA9015 Storage Solution for pH / ORP Electrodes Accessory Milwaukee

    Milwaukee Milwaukee MA9015 Storage Solution for pH / ORP Electrodes

    MA9015 is a lab grade electrode storage solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens. To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not be allowed to dry out. Properly storing your pH electrode in a solution keeps the glass membrane well hydrated which maintains proper function and provides accurate readings. MA9015 also helps keep the junction in your pH and ORP electrode flowing which is critical for fast results. DESIGN FEATURES Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings. Formulated to minimize organic growth on your electrode. Sealed against light with air tight, tamper proof cap. Factory blended to precise standards in a dedicated, temperature controlled environment. Simply open and add to the cap of your electrode or tester. Each bottle marked with lot number and expiration date.

    £11.20

  • Milwaukee MW101 PRO pH Meter Pocket Tester Milwaukee

    Milwaukee Milwaukee MW101 PRO pH Meter

    The Milwaukee MW101 PRO pH meter has won fans around the world with its reliable, fast operation as well as its rugged design and accuracy. WHAT PEOPLE ARE SAYING "This is an awesome pH meter!" "I love this little meter." "Rugged portable meter, calibrates easily with pH 4, 7 and 10 buffers, readings dead on." SUMMARY The Milwaukee MW101 PRO pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy. The Milwaukee PRO pH Meter is preferred by people testing samples that cause other pH testers and meters to fail from brewers and wine makers to hydroponic growers and farmers. The Milwaukee PRO pH meter offers: SPEED The MW101 delivers fast results to ±0.02 pH accuracy with two point calibration. TOUGHNESS The rugged meter is designed to take knocks. Paired with low maintenance, lab grade SE220 double junction, gel filled electrode, the MW101 is ideal for everyone from educators and pool professionals to brewers and growers. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Accurate to ±0.02 pH with a 0.00-14.00 pH range. Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Simple manual two-point calibration for increased accuracy. Gel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage (SE220 probe included). 3 feet probe cables for extra flexibility when testing. Auto shut off and low power demand for approx. 300 hours of continuous use. (battery included) USE AND CARE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. SENSING BULB The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. REFERENCE JUNCTION The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function. You can extend the life of your pH electrode in the following ways. CLEANING AND STORAGE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee codes MA9015 and MA9016 at checkout time! This will be needed to help clean and condition the pH electrode before use! STORAGE The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. CLEANING Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016. CALIBRATION The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.

    £94.87

  • Milwaukee MA9071 Oxygen Electrolyte Solution Accessory Milwaukee

    Milwaukee Milwaukee MA9071 Oxygen Electrolyte Solution

    The MA9071 electrolyte fill solution is designed for Milwaukee's polarographic dissolved oxygen probe. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe. DESIGN FEATURES PRECISE FORMULATION Factory mixed using reagent grade chemicals in a dedicated, temperature controlled environment. TRACEABLE Product labeled with product code, lot number and expiration date. SECURE Air tight bottle with tamper-proof seal. USE AND CARE “OPEN AIR” CALIBRATION PROCEDURE FOR THE MW600 DISSOLVED OXYGEN METER 1. Remove the membrane Take the membrane off the end of the probe and dry the diode off. 2. Zero out the display Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0. 3. Fill the membrane Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure) 4. Attach the membrane Screw the membrane on to the probe. 5. Let stabilize Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes) 6. Adjust Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100. You are now calibrated. EXTRA TIPS Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane. Always use fresh electrolyte solution (MA9071).

    £24.04

  • Milwaukee M10016B Electrode Cleaning Solution Sachet Sachet Milwaukee

    Milwaukee Milwaukee M10016B Electrode Cleaning Solution Sachet

    Electrode cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and sediment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode. DESIGN FEATURES Electrode Cleaning Solution - 20 mL (box of 25). Fundamental for gently cleaning the electrode between uses and before storage. Sealed against light and air. Ideal for on-the-spot cleaning too. Simply open, insert the tester or electrode into the sachet and gently stir let soak for 15 minutes. Formulated with a 5 year expiry

    £1.14


© 2024 GroAqua, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account