Filtration applications are typically defined by the performance characteristics of the filter cartridge being used, however selecting the right filter housing can optimize and enhance the results achieved from different cartridges. Several factors are important to consider when selecting housings such as system operating pressure, flow rate and pipework requirements, application temperature, chemical compatibility and the housing location/environment.
Aquafilter FHPR12-B1-AQ 1/2" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR12-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR12-B1-AQ filter housing consist of a transparent sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR12-B1-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 1/2” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRCL12-B-TWIN 1/2" BSP two stage system with two blue filter heads with 1/2" BSP brass inserts, and two transparent filter housing sumps, wrench and colour box.Set includes: FHPRCL12-B-TWIN 1/2" BSP system, wrench, 2 bacteriostatic centrering rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp: 2°C
Maximum Temp: 43°C
Maximum pressure: 6 bar (90 ) PSI
Transparent Sump: PET
Filter Cap: PP
Number of O-rings: 2
Pressure Relief Valve: Yes
Aquafilter filter housing FHPRCL34-B-TRIPLE 3/4" BSP three stage system with three blue filter heads with 3/4" BSP brass inserts, and three transparent filter housing sumps, wrench and colour box.Set includes:FHPRCL34-B-TRIPLE 3/4" BSP system, wrench, 3 bacteriostatic centrering rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp: 2°C
Maximum Temp: 43°C
Maximum pressure: 6 bar (90 ) PSI
Transparent Sump: PET
Filter Cap: PP
Number of O-rings: 2
Pressure Relief Valve: Yes
Systems consist of Big Blue & filter housings to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housings are compatible with a 4 1/2” x 20" type cartridges widely available on the market. Filter housings consist of housing, sump and filter head with 1" brass inlet/outlet inserts. Heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.
System is equipped with either 20"Big Blue ®filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue® type cartridge
Product features:
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Easy to connect to cold water inlet
Easy to install, No Electricity, No Drain Required
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 20" type cartridges available on the marketHousings are NSF approved for structural integrity and material requirementsEasy to install with System SpecificationsManufactured from FDA CFR-21 compliant materialsMade in EU with High Performance Components
Specifications:
Housing: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 45°C (113°F)
Dimensions (H x W x L) HHBB10B: 720mm x 540mm x 220mm
Cartridge dimensions HHBB10B: 20" x 4 1/2" (508 mm x 115 mm)
System includes:
1 x metal platform
3 x big blue type filter housings (20")
2 x pressure gauges (inlet & outlet) with nickel extension to the pressure gauges
3 x antibacterial and antimicrobial filter centralizing ring
1 x full instructions
1 x wrench
Aquafilter HHBB10B Big Blue filter housing to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housing are compatible with a broad range of 4 1/2” x 10" (or 4 1/2" x 10") type cartridges widely available on the market. Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Filter heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.Systems include:
metal platform
3 x Big Blue type filter housings
2 x pressure gauges (inlet & outlet)
wrench
3 x antibacterial and antimicrobial filter centralizing ring
System is equipped with either 10" Big Blue filter housings in blue color, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue type cartridges.Features
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 10" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications
Blue sump: PP
Head filter: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2O-ring: NBR
Thread: 1" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 43ºC
Aquafilter offers HHBB20A 2-Stage Whole House Big Blue® filtration System suitable for POE (Point of use) installations. HHBB20A housings are compatible with a broad range of cartridge types available on the market. Additionally, pressure drop can be monitored through the two pressure gauges located in the inlet and outlet positions of the system besides the microbial protection conferred by blue colored-housings in sunny locations. Equipped with pressure relief valves and a rounded bottom which increases stress resistance, HHBB20A ensures a continuous supply of fresh and clean drinking water.
SYSTEM CONTENT & SPECIFICATIONS
Housing sumps and filter heads: FH20Bx_L
Pressure gauge and brass extension: KCGA-1 and KCGA-1-E2
Centralizing and o-rings: NI-412-CENT-GR-AB and OR-N-1524X57
Feed water connectors: FXCG1-B
Wrench for filter: FXWR1BB-BL
Installation instructions (English language)
System dimensions (Height x Width x Length): 720 x 380 x 220 mm
Cartridge dimensions (Height x Outer Diameter): 20 x 4 1/2 inches
Operating temperature range (water): 2 - 45 °C (35 – 113 °F)
Operating pressure: 6 bar (90 psi)
100% factory-assembled, leak tested and ready for installation
Aquafilter HHBB10A Big Blue filter housing to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housing are compatible with a broad range of 4 1/2” x 10" type cartridges widely available on the market .Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Filter heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.Systems include:
metal platform
2 x Big Blue type filter housings
2 x pressure gauges (inlet & outlet)
wrench
2 x antibacterial and antimicrobial filter centralizing ring
System is equipped with either 10" Big Blue filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue type cartridges.Features :
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 10" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Blue sump: PP
Head filter: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Thread: 1" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 43ºC
Aquafilter OR-H10-1 set bottom (blue) and top (black ) O-rings for filter housing: Top O-ring for filter housing: H10A, H10B, H10B-AB, H10C, H10D, H10K, H105.
10” in-line set Big Blue type: Big Blue type filter housing, with blue sump and pressure relief valve, mounting bracket with screws, wrench, bacteriostatic filter centralizing ring, instruction and colour box. Available with: 1", 1 1/4", 1 1/2" BSP connection. Head is equipped with pressure relief valve which enables release of air accumulated after cartridge replacement.Features:
High quality
NSF certified
FDA CFR Title 21 Compliance
Factory Tested
Domestic and commercial use
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Ideal for POE use
Equipped with filter bracket, wrench and pressure gauge
Equipped with antibacterial and antimicrobial filter centralizing ring
Full flow 1” ports
Made in EU with High Performance
Components
Specifications:
Housing: PP
Cap: PP
Pressure relief valve: brass
O-ring: NBR
Thread: 1" BSP
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 43°C
Aquafilter FHPR12-B-AQ 1/2" BSP filter housing is dedicated for cold water on residential and commercial applications.FHPR12-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR12-B-AQ filter housing consist of a transparent sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR12-B-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Ideal for POE or POU use- Full flow 1/2” BSP ports- Made in EU with High Performance Components
Aquafilter FH20B1-B-WB 1" BSP Big Blue type filter housing offer the versatility to meet all customer large capacity filtration needs.
Aquafilter FH20B1-B-WB 1" BSP are dedicated for high flow cold water on commercial and industrial applications.
Aquafilter FH20B1-B-WB 1" BSP housing are compatible with a broad range of 4 1/2" x 20" type cartridges widely available on the market.
This housing can be used in a commercial setting due to its high efficiency. Filter housing consists of housing sump and filter head with brass 1” inlet/outlet inserts.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure).Features:
High quality
NSF certified
FDA CFR Title 21 Compliance
Factory Tested
Domestic and commercial use
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Ideal for POE use
Equipped with filter bracket, wrench and pressure gauge
Equipped with antibacterial and antimicrobial filter centralizing ring
Full flow 1” ports
Made in EU with High Performance components
Specifications:
Housing: PP
Cap: PP
Pressure relief valve: brass
O-ring: NBR
Thread: 1" BSP
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 43°
Aquafilter FHPRN34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN34-B1-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN34-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 3/4” BSP ports- Made in EU with High Performance Components
Efficient Filtration System
Upgrade your water filtration system with the Aquafilter filter housing FHPRCL12-B-TWIN. This system is designed for 1/2" BSP filters, providing efficient removal of contaminants for clean and fresh drinking water. The dual ports allow for easy installation under your sink, saving space and keeping your kitchen clutter-free.
Under Sink Installation
The Aquafilter filter housing FHPRCL12-B-TWIN is perfect for undersink installation, making it ideal for residential use. The compact size and sleek design ensure that it fits seamlessly into any kitchen setup. Say goodbye to bulky filter systems that take up valuable space - this system is both practical and efficient.
High-Quality Construction
Made from durable materials, this filter housing system is built to last. The 1/2" ports provide a secure connection for filters, ensuring a leak-proof operation. Trust Aquafilter for all your filtration needs - their products are known for their quality, reliability, and long-lasting performance. Upgrade to the Aquafilter filter housing FHPRCL12-B-TWIN today and enjoy clean, pure water with ease.
Aquafilter NI-212-CENT-GR-AB antibacterial filter cartridge centralizing ring.This product centralizes the filter cartridge inside its housing, reduces the risk of damage to the cartridge and housing elements at installation, and ensures seal tightness of the housing head - all while protecting your filter from bacteria and other microorganisms, thanks to new nanosilver technology.Features:
Competitive Pricing
Improves ease of cartridge installation
Increases ease of correct installation
Ensures proper vertical position of cartridge within housing
Stabilizes and centralizes cartridge for equal water distribution
Removes risk of bacteria
BACINIX nanosilver technology, providing antibacterial and antimicrobial protection
Centralizers inhibit harmful growth of bacteria, fungi and molds by using nanosilver BACINIX technology
Reduces risk of dislodging cartridge
Protects cartridge from faults due to poor positioning
Facilitates consistently correct cartridge installation
Made in the EU with High Quality materials
FHPR34-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR34-B-AQ housings can be mounted individually or connected in a seriesSpecifications:
Blue sump: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
O-ring: NBR
Number of o-rings: 2
Thread: 3/4" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum temperature: 2ºC
Maximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter brass extension for KCGA-1 pressure gauge. Allows proper installation of the pressure gauge on H10C, HB1B, HB1D, HB1C, HB2B, HB2D, HB2C, H105 series housing.
Aquafilter NI-412-CENT-GR-AB antibacterial filter cartridge centralizing ring.This product centralizes the filter cartridge inside its housing, reduces the risk of damage to the cartridge and housing elements at installation, and ensures seal tightness of the housing head - all while protecting your filter from bacteria and other microorganisms, thanks to new nanosilver technology.Features:
Competitive Pricing
Improves ease of cartridge installation
Increases ease of correct installation
Ensures proper vertical position of cartridge within housing
Stabilizes and centralizes cartridge for equal water distribution
Removes risk of bacteria
BACINIX nanosilver technology, providing antibacterial and antimicrobial protection
Centralizers inhibit harmful growth of bacteria, fungi and molds by using nanosilver BACINIX technology
Reduces risk of dislodging cartridge
Protects cartridge from faults due to poor positioning
Facilitates consistently correct cartridge installation
Made in the EU with High Quality materials
Aquafilter FHPR1-HP1 1" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR1-HP1 1" BSP housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR1-HP1 1" BSP filter housing consist of a transparent sump and head with 1” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR1-HP1 housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1" BSPMaximum Pressure: 10 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 45°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 1” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRN12-B-TWIN 1/2" BSP two stage system with two blue filter heads with 1/2" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN12-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 1/2" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
Aquafilter FHPRN12-B1-AQ 1/2" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN12-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN12-B1-AQ filter housing consist of a blue sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN12-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 1/2” BSP ports- Made in EU with High Performance Components
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Filter housing brackets allow for housings to be attached in a fixed location which facilitates easy installation, maintenance and on-going filter change. Double and Triple brackets offer the solution for multiple housing connections. Bracket kits include appropriate screws for quick installation.
Aquafilter FHPR34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B1-AQ filter housing consist of a transparent sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR34-B1-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRN34-B-TWIN 3/4" BSP two stage system with two blue filter heads with 3/4" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN34-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
Aquafilter OR-H10-1 set bottom (blue) and top (black ) O-rings for filter housing: Top O-ring for filter housing: H10A, H10B, H10B-AB, H10C, H10D, H10K, H105.
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for Ø 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
