Enhanced Water Purity
Aquafilter presents the FCPS20-AB 20 micron melt-blown antimicrobial polypropylene filter cartridge, designed to provide superior filtration for your water supply. This filter cartridge effectively removes impurities and contaminants, ensuring clean and safe drinking water for you and your family.
Antibacterial Protection
The Aquafilter FCPS20-AB features antimicrobial properties that inhibit the growth of bacteria, further enhancing the purity of your water. This advanced technology sets it apart from standard water filters, providing an extra layer of protection for your health and well-being.
Easy Installation and Maintenance
This 10-pack of filter cartridges is easy to install and maintain, making it a convenient choice for busy households. Simply replace the cartridge every few months to ensure optimal performance and continued protection against contaminants. Upgrade to Aquafilter FCPS20-AB for peace of mind and pure drinking water.
Aquafilter 10'' Set of 3 Replacement Filters Whole House Water Purifier and Softener Set contains: FCPP5 Yarn string wound sediment Premium FCCBL activated carbon block cartridge FCPRA-C Coconut Shell GAC and Anti-Scale Water Filter Stage 1:Yarn sediment filter removes sand, rust, silt and other sediments up to 5 micron Stage 2Activated carbon block cartridge removes levels of Chlorine, Organic Compounds, Pesticides, Herbicides, Trihalomethanes and Volatile Organic Compounds (VOCs).
Additionally, the cation exchange based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean water. Stage 3The FCPRA-C filter cartridges require very little maintenance, no back-washing and no salt. Coconut shell activated carbon used in filter cartridges removes chlorine from water, solvents and aromatic hydrocarbons (improves the taste and odour) and compounds, phenol, benzene, and organic substances. FCPRA-C is equipped with a post-filter pad to prevent carbon from being washed out and to avoid blockage if high particulate is present.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Get the filtration performance you need at an unbeatable price with the PRISM FC-DSPP Value Spun Polypropylene Filter. Designed for reliability and efficiency, this budget-friendly option is perfect for various filtration applications.
Key Features
AffordabilityThe most cost-effective spun-bonded cartridge in the PRISM range, ideal for frequent replacements.
Graded Density ConstructionReduces premature blinding of downstream filtration systems, enhancing overall efficiency.
Optimized for Batch ProcessesSuitable for applications that require frequent cartridge changes, ensuring smooth operations.
Material DurabilityMade with high-quality polypropylene for long-lasting and consistent performance.
Double Open Ended DesignFeatures DOE end-caps for seamless compatibility with most standard housings.
Versatile Applications
Whether you’re managing batch processes or guarding downstream systems from premature clogging, the PRISM FC-DSPP is built to deliver. It’s a reliable choice for industries that demand affordable, efficient, and high-performing filtration solutions.
Aquafilter NI-212-CENT-GR-AB antibacterial filter cartridge centralizing ring.This product centralizes the filter cartridge inside its housing, reduces the risk of damage to the cartridge and housing elements at installation, and ensures seal tightness of the housing head - all while protecting your filter from bacteria and other microorganisms, thanks to new nanosilver technology.Features:
Competitive Pricing
Improves ease of cartridge installation
Increases ease of correct installation
Ensures proper vertical position of cartridge within housing
Stabilizes and centralizes cartridge for equal water distribution
Removes risk of bacteria
BACINIX nanosilver technology, providing antibacterial and antimicrobial protection
Centralizers inhibit harmful growth of bacteria, fungi and molds by using nanosilver BACINIX technology
Reduces risk of dislodging cartridge
Protects cartridge from faults due to poor positioning
Facilitates consistently correct cartridge installation
Made in the EU with High Quality materials
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
AQUAFILTER FCCEL5 cartridges are manufactured from durable polyester non-woven fabric. They contain no binders or cellulose and have been developed specifically for drinking and bottled water applications. In order to provide increased surface area and longer life, FCCEL5 series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. FCCEL5 series cartridges provide great sediment removal and dirt holding capacity to extend the time between cartridge changeouts. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect boilers and pluming systems. Utilizing 100% synthetic media makes FCCEL5 series cartridges washable and reusable. If the cartridge becomes clogged you can easilly clean it by direct spray into pleats to dislodge sediment or let dry and brush off filter cake from surface of the media. FCCEL5 series cartridges are bacteria and chemical resistant. They are characterized with very low pressure drop.FCCEL5 series cartridges are typically used as a first stage of potable water filtration.Specifications:
Micron rating: 5
Lengths: 10"
Outer diameter: 2 1/2"
Inner diameter: 1,1"
Min. feedwater temp. 2°C
Max. feedwater temp. 60°C
Avg. Efficiency: 87%
High-Quality Water Filtration
The Aquafilter FCCBKDF2 10 is a top-of-the-line water filter cartridge that features coconut shell GAC carbon, KDF, and softening media. This combination effectively reduces chlorine and other contaminants for cleaner, healthier drinking water. Enjoy fresh-tasting water straight from your tap with this reliable filtration system.
Chlorine Reduction
Say goodbye to the taste and odour of chlorine in your water with the Aquafilter FCCBKDF2 10 cartridge. The KDF media helps to significantly reduce chlorine levels, while the coconut shell GAC carbon further enhances water quality. Experience the difference in every sip and have peace of mind knowing your water is safe and clean.
Easy Installation
This water filter cartridge is designed for easy installation and hassle-free maintenance. Simply follow the instructions provided to replace your old cartridge with the Aquafilter FCCBKDF2 10. Enjoy long-lasting performance and dependable filtration with this high-quality product.
Efficient Whole House Filtration
This 3 Stage Big Blue 10" Water Purifier and Dechlorinator Filter Kit is designed to provide your entire home with clean and safe water. It effectively filters out impurities, chemicals, and contaminants to ensure that every drop of water in your home is crystal clear and safe to use.
Advanced Water Softening Technology
Not only does this filter kit purify your water, but it also helps in softening the water, reducing limescale buildup in your fixtures and appliances. Say goodbye to hard water stains on your dishes and showers, and hello to healthier hair and skin with the help of this water softening feature.
Easy Installation and Maintenance
With easy installation and low maintenance requirements, this 3 Stage Big Blue 10" Water Purifier and Dechlorinator Filter Kit is the perfect solution for your whole house water filtration needs. Enjoy clean, soft water throughout your home without the hassle of constant filter changes or costly maintenance.
Whole House Purification
Experience clean and safe water throughout your entire home with the 3 Stage Big Blue 20" Water Purifier and Softener Filter Kit. This advanced system is designed to effectively remove impurities, eliminate chlorine taste, and reduce unpleasant odors from your water supply. Ensure your family's health and well-being with this comprehensive whole house filtration solution.
Chlorine Taste & Odor Reduction
Say goodbye to the harsh taste and smell of chlorine in your drinking water with our high-performance water filtration system. The three-stage filtration process targets chlorine molecules, ensuring that every drop of water is free from contaminants and odors. Enjoy refreshing and pure water straight from your tap, shower, or any other outlet in your home.
Water Softening Technology
In addition to purifying your water, this innovative system also incorporates water softening technology to prevent mineral buildup and extend the life of your appliances. Say goodbye to limescale deposits on your fixtures and dishes, and enjoy softer skin and hair after bathing. Invest in the 3 Stage Big Blue 20" Water Purifier and Softener Filter Kit for a complete water treatment solution for your home.
Hailea HX-8810 1000lph water pump
These versatile high jet pumps have a wide range of applications and are fully immersible, plus can be used inline (outside water). All are supplied with clip on filter hoods.
The Hailea HX-8810 takes 19mm Pipe and is suitable for 100L tanks.
Features:
Ceramic shaft for fresh and sea water dual use (ideal for handling nutrient solutions).Double water-cooled structure for rapid heat dissipation.Super quality ABS plastic case, which is anti-alkali and anti-corrosive.Mounted on suction cups for secure location.Applications include pumping, oxygen supplying, wave making / pulse NFT, filtration.These pumps are designed for continuous use
Precious high aluminum ceramic shaft,for fresh and sea water dual use.
Double water-cooled structure for rapid heat dissipation.
Adopts high quality resin to seal the winding and never leak electricity.
Super quality ABS plastic case , which is anti- alkali and anti-corrosive.
Strong sucker to fix pump intensively, which is never chapped.
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out.Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs.Vortex impeller handles up to 8mm solid particulate.
The Hailea - T9000 Pond Pumps are without doubt one the best value pumps on the market today.
These T9000 Pond Pumps represent great value for money they are also a low wattage pump and most of all ultra reliable.
The whole Hailea T range can either be used dry inline just like the Aquamax pumps , or submerged therefore making them totally at home most environments. They have the same 1.5 inch threaded inlet and outlet
The T - Pump also has a built in thermal overload safety device to protect the pump.
Hailea Pump range are now the best selling range of pumps on the market today
Specifications
Dimensions: 359 x 135 x 162mm
Power consumption: 140 Watts
Turnover rate: 9500ltrs/hr (2222) gls
Head: 3.8
Weight: 4.5 kg Approx
Voltage: 220-240v/50Hz
Cable Length: 10 Meters
Inlet - Outlet Size: 1.5 inch BSP - inlet - Outlet 1.5 inch BSP
The PRISM FC-DSPP Core Spun Polypropylene Cartridge is a reliable and cost-effective solution for efficient particulate reduction in water treatment systems. Engineered with precision, its unique mini-grooved construction offers a significantly higher surface area and superior dirt holding capacity compared to standard filters. Designed for versatility, the Core DSPP is available in various sizes, including large diameter configurations, to suit a wide range of applications and system requirements.
Key Features
Mini-Grooved ConstructionInnovative design with mini-grooves increases the cartridge's surface area, enhancing dirt holding capacity and filtration efficiency.
General Particulate ReductionIdeal for reducing sediment, dirt, and other particulates, providing cleaner and clearer water.
Flexible Sizing OptionsChoose from lengths including 4 7/8", 9 7/8", 20", 30", and 40" for regular diameters, as well as large diameter options like 9 3/4" and 20".
Large Diameter ConfigurationsThe Core DSPP-L versions offer higher dirt loading potential and increased flow rates, making them suitable for higher demand systems.
High Efficiency and PerformanceRated at 80% efficiency, it is available in multiple micron ratings (1, 5, 10, and 20) to meet varied filtration needs.
Technical Specifications
Material: Polypropylene
Micron Ratings: 1, 5, 10, 20
Efficiency: 80%
Length Options: 4 7/8", 9 7/8", 20", 30", 40", 9 3/4" Large Diameter, 20" Large Diameter
Diameter: Regular (2.5"), Large Diameter (4.5")
End-Cap: DOE (Double Open Ended)
Why Choose PRISM FC-DSPP Core Spun Polypropylene Cartridge?
The PRISM FC-DSPP Core Spun Polypropylene cartridge is specifically designed to deliver premium filtration performance at an affordable price. Its advanced mini-grooved design ensures greater dirt loading capacity and extended service life, reducing maintenance and replacement costs. For systems requiring higher flow rates and larger dirt holding potential, the large diameter options of the Core DSPP-L are an excellent choice. Perfectly suited for residential, commercial, and industrial applications, this versatile cartridge delivers consistent results without compromise.
This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
Aquafilter FCPS5 10" series cartridges are NSF certified using FDA approved polypropylene for material requirements. The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. FCPS5 uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. Polypropylene fibers are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems. FCPS5 series cartridges are an ideal true depth filters and can be used for filtration of cold potable water. Aquafilter wide range of melt-blown cartridges has multiple fiber zones. These multi-fibre zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: PP
Filter life: up to 6 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 5
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
The filters are intended to purify water from sediment particles such as rust, sand, scale, silt etc.
Specification
The replacement filter is a roll of fiber polypropylene manufactured by using melt blowing process.
The required degree of rigidity is achieved without using a core by melting fibers into a rigid structure.
The Unimer Mooring Compensator provides cushioned relief for mooring lines, pier and deck fittings.
The compensator is design protected and features a cleat shaped locking mechanism that prevents slipping. The self-locking internal elements in black polyamide stop chafed lines completely. This increases your lines life span and ensures efficient relief.
The compensator comes in four different sizes, so you can choose the best fit for your boat. The same compensator size takes different line diameters, allowing you to vary your lines with changing conditions.
Set contains
FCPS5 sediment cartridge
FCPRA10 anti-scale cartridge filled with polyphosphate
FCCST Water softening cartridge
Stage 1Sediment filter removes sand, rust, silt and other sediments up to 5 micron
Stage 2FCPRA cartridges provide a strong inhibition against scaling processes in which calcium, magnesium, iron and manganese are involved. By preventing the scale deposition of many compounds, FCPRA extends the service life of your water pipes , boilers and heating elements, enhancing an efficient and clean supply of your drinking water.
Stage 3FCCST Water softening cartridge. Through its accurate media consisted of ion exchange-based resin, FCCST reduces calcium and magnesium. In case your feed water contains a high concentration of suspended matter. The softening effect takes place within the filter without adding any salt or chemicals into the water. The filter removes harmful substances and reduce limescale, prolonging life-span of your home appliances such as washing machine or dishwasher and saving you money.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
The Dryden Aqua Air Diffuser is a semi-flexible, high-efficiency fine bubble air diffuser available in 9 different lengths, depending on the air through-put required . It provides oxygen transfer rates of up to 5kg/kw, 10m3/h of air and 1 kg of O2/h. Its semi-flexible construction with its own internal ballast will stay on the bottom of tank or pond without the need to be anchored to the floor.
The Dryden Aqua Air Diffuser combines excellent performance with cost effectiveness for aeration, oxidation and biological treatment.
Dryden Aqua Air Diffuser Key Features
Semi-flexible, tubular construction
Self weighted
Available in 9 lengths from 0.3 – 3m.
Air handling capacity from 1 – 10m3/hr
Less than 0.2 Bar (3 psi) pressure differential
Oxygen transfer efficiency up to 5 kg/kwhr
Resistant to calcification
Easy to clean and maintain
Robust and long-lasting (typical lifespan is 5 – 10 yrs)
Built in non-return valve
Stainless steel and plastic construction
Can be used with Air, N2, CO2
Oxygen Transfer Performance
Surface aerators waste a huge amount of kinetic energy throwing the water into the air, transfer coefficient is 1 kg to 2 kg of oxygen per kW. Membrane diffusers are more efficient at 2 kg to 3 kg of oxygen per kW. The Dryden Aqua diffuser at over 5 kg is therefore the most efficient fine bubble diffuser available and is ideal for retrofit applications as a simple drop in product for tanks and ponds in Aquaculture and Waste Water Treatment.
Upgrade your filtration needs with the PRISM FC-SPPL Value Polyester Pleated Filter. This product combines affordability with outstanding performance, making it the perfect choice for a variety of applications.
Key Features
Economical FiltrationOffers cost-effective filtration without compromising on quality.
High Surface Area DesignThe pleated polyester media increases filtration efficiency and supports high flow rates.
Low Pressure DropOptimized to minimize pressure drops, ensuring smoother operation and consistent performance.
Vinyl Plastisol End-CapsEliminates the need for gaskets while maintaining pleat pack integrity for reliable filtration.
Durable Polypropylene CoreFeatures a robust inner core for added strength and longevity.
Specifications
Material: Resilient polyester for versatile use
Efficiency: 90% for dependable filtration outcomes
Sizes Available: 9 ¾", 20", 30", 40"; large diameter sizes also available
Micron Ratings: 0.5, 1, 5, 10, 20, 30, 50
Versatile Applications
The PRISM FC-SPPL filter is ideal for a range of uses, from borehole and river water filtration to handling harsher chemicals. Its versatility and resilience make it a highly adaptable option for various filtration requirements.
This quartz sleeve offers a reliable fit for Wedeco Aquada 7/10 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 7/10 Altima, Proxima and Maxima systems
Aquafilter EXCITO-ST-CRT a set of 4 replaceable in-line cartridges for EXCITO-ST system. Set includes: AIPRO-20M-AQ, AISTRO-L-AQ, AICRO-L4, AIPRO-1M-AQ. Cartridges remove sediments such as sand, silt, rust and suspended solids, chlorine, organic substances, certain pesticides, iron, heavy metals. Using the set it is possible to reduce water hardness and improve the taste and aroma of filtered water. KDF exhibits bacteriostatic properties inhibiting bacterial growth and therefore protecting the cartridge. Available with 1/4" NPT connection.Specification:Sizes: 2,5" x 12"Micron rating: 5Filter Life: 6-12 months
FHPR34-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR34-B-AQ housings can be mounted individually or connected in a seriesSpecifications:
Blue sump: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
O-ring: NBR
Number of o-rings: 2
Thread: 3/4" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum temperature: 2ºC
Maximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
accurate pH calibration
Ensure precise calibrations with the Milwaukee M10004B pH 4.01 Calibration Solution Sachet. This pack contains 25 individual sachets of pH 4.01 solution, providing a reliable option for calibrating pH meters and electrodes. Each sachet is conveniently pre-measured for easy use and eliminates the need for measuring out liquid solutions.
high-quality formulation
The Milwaukee M10004B pH 4.01 Calibration Solution Sachet is made with high-quality ingredients to ensure accuracy and consistency in pH readings. The solution is specially formulated to maintain a pH level of 4.01, making it ideal for calibrating a wide range of pH meters used in various applications. Trust this reliable solution for your calibration needs.
convenient packaging
Each sachet in the Milwaukee M10004B pH 4.01 Calibration Solution pack is individually sealed to prevent contamination and maintain freshness. The compact size of the sachets makes them easy to store and transport, providing convenience for both laboratory and field use. Stay prepared with this convenient pack of calibration solutions for your pH testing equipment.
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out.Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
The Hailea - T18000 Pond Pumps are without doubt one the best value pumps on the market today.
These T18000 Pond Pumps represent great value for money they are also a low wattage pump and most of all ultra reliable.
The whole Hailea T range can either be used dry inline just like the Aquamax pumps , or submerged therefore making them totally at home most environments. They have the same 1.5 inch threaded inlet and outlet
The T - Pump also has a built in thermal overload safety device to protect the pump.
Hailea Pump range are now the best selling range of pumps on the market today
Specifications
Dimensions: 410mm L x 155mm W x 189mm H
Power consumption: 285 Watts
Turnover rate: 17350ltrs/hr (3855) gls
Head: 6.1
Weight: 5.9 kg Approx
Voltage: 220-240v/50Hz
Cable Length: 10 Meters
Inlet - Outlet Size: 1.5 inch BSP - inlet - Outlet 1.5 inch BSP
The Milwaukee T75 Waterproof Total Dissolved Solids (TDS) Pen is designed for, aquariums, aquaculture, education, water conditioning and many other applications. The T75 helps you make sure that your fish have the right TDS balance to help them stay healthy. TDS also help keep filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results.
DESIGN FEATURES
Measures Total Dissolved (TDS) direct and with automatic temperature compensation.
Easy-to-read LCD.
Ideal range for aquariums (0 to 1999 ppm).
Units in ppm easily convertible to uS/cm.
Factory calibrated with the ability to recalibrate if needed.
250 hours continuous use (3 x 1.5V batteries included).
Simple one point calibration.
Fully waterproof to IP65
Replaceable TDS electrode MA73075.
CARE AND USE
MAINTENANCE
TDS/PPM electrodes can develop nutrient build up over time. To miminice build up, always rinse the probe in fresh tap or DI water after every use.
CONVERTING TDS TO EC
The Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution.
TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.
Your TDS/PPM readings can be approximately converted to uS/cm as shown in the examples below.
1 ppm = 2 uS/cm on the 0.5 factor scale
1 ppm = 1.43 µS/cm on the 442 scale or .70 factor scale
Thank you for considering Milwaukee to help you take your results to the next level.
This 24 V Power-over-Ethernet (PoE) injector is designed for a clean installation in any environment. Supporting many country-specific plugs and power options, which are sold separately, Mimosa's PoE is the best power solution for your wireless installations. Supports the A5x, C5x, and C5c.
Product Features:
Output Voltage: 24V 1.2A
Max. Current Load: 1.5A (12W)
Input Voltage: 100VAC - 240VAC ~ 50Hz / 60Hz Max. 0.75A
Input Current: 0.5A @ 90 VAC
Gigabit LAN: Yes, (2) RJ-45
Product Specifications:
Input Frequency: 47Hz - 63Hz
Max In-Rush Current: 70AVAC @ 230VAC
Protection: Over Current; Over Voltage
Efficiency: 82+% - Level VI
RJ-45: Metal-shielded
AC Connector: IEC-320 C6 (3 Pin Inlet)
Operation Indicator: 1 LED (Blue)
Operating Temperature: 0°C to +40°C
Operating Humidity: 10% to 90% non-condensing
Storage Temperature: -20°C to +80°C (-4°F to 176°F)
Product Includes:
(1) 24V Mimosa PoE Injector
Suitable for the consistent feeding of all fish species, and is available in 5 different versions
The unique twist-lock lid is wind and varmint-proof on these high-quality, UV-resistant, polyethylene hoppers. All four sizes have the same pendulum demand feeding mechanism for #4 crumble to 1/4" pellets. Batteries not included or needed. One-year warranty.
Note: Bottom of feeder should be at least 20" above the surface of the water.
