Filtration applications are typically defined by the performance characteristics of the filter cartridge being used, however selecting the right filter housing can optimize and enhance the results achieved from different cartridges. Several factors are important to consider when selecting housings such as system operating pressure, flow rate and pipework requirements, application temperature, chemical compatibility and the housing location/environment.
Aquafilter FHPR12-B1-AQ 1/2" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR12-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR12-B1-AQ filter housing consist of a transparent sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR12-B1-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 1/2” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRCL12-B-TWIN 1/2" BSP two stage system with two blue filter heads with 1/2" BSP brass inserts, and two transparent filter housing sumps, wrench and colour box.Set includes: FHPRCL12-B-TWIN 1/2" BSP system, wrench, 2 bacteriostatic centrering rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp: 2°C
Maximum Temp: 43°C
Maximum pressure: 6 bar (90 ) PSI
Transparent Sump: PET
Filter Cap: PP
Number of O-rings: 2
Pressure Relief Valve: Yes
Aquafilter filter housing FHPRCL34-B-TRIPLE 3/4" BSP three stage system with three blue filter heads with 3/4" BSP brass inserts, and three transparent filter housing sumps, wrench and colour box.Set includes:FHPRCL34-B-TRIPLE 3/4" BSP system, wrench, 3 bacteriostatic centrering rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp: 2°C
Maximum Temp: 43°C
Maximum pressure: 6 bar (90 ) PSI
Transparent Sump: PET
Filter Cap: PP
Number of O-rings: 2
Pressure Relief Valve: Yes
Systems consist of Big Blue & filter housings to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housings are compatible with a 4 1/2” x 20" type cartridges widely available on the market. Filter housings consist of housing, sump and filter head with 1" brass inlet/outlet inserts. Heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.
System is equipped with either 20"Big Blue ®filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue® type cartridge
Product features:
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Easy to connect to cold water inlet
Easy to install, No Electricity, No Drain Required
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 20" type cartridges available on the marketHousings are NSF approved for structural integrity and material requirementsEasy to install with System SpecificationsManufactured from FDA CFR-21 compliant materialsMade in EU with High Performance Components
Specifications:
Housing: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 45°C (113°F)
Dimensions (H x W x L) HHBB10B: 720mm x 540mm x 220mm
Cartridge dimensions HHBB10B: 20" x 4 1/2" (508 mm x 115 mm)
System includes:
1 x metal platform
3 x big blue type filter housings (20")
2 x pressure gauges (inlet & outlet) with nickel extension to the pressure gauges
3 x antibacterial and antimicrobial filter centralizing ring
1 x full instructions
1 x wrench
Aquafilter HHBB10B Big Blue filter housing to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housing are compatible with a broad range of 4 1/2” x 10" (or 4 1/2" x 10") type cartridges widely available on the market. Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Filter heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.Systems include:
metal platform
3 x Big Blue type filter housings
2 x pressure gauges (inlet & outlet)
wrench
3 x antibacterial and antimicrobial filter centralizing ring
System is equipped with either 10" Big Blue filter housings in blue color, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue type cartridges.Features
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 10" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications
Blue sump: PP
Head filter: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2O-ring: NBR
Thread: 1" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 43ºC
Aquafilter offers HHBB20A 2-Stage Whole House Big Blue® filtration System suitable for POE (Point of use) installations. HHBB20A housings are compatible with a broad range of cartridge types available on the market. Additionally, pressure drop can be monitored through the two pressure gauges located in the inlet and outlet positions of the system besides the microbial protection conferred by blue colored-housings in sunny locations. Equipped with pressure relief valves and a rounded bottom which increases stress resistance, HHBB20A ensures a continuous supply of fresh and clean drinking water.
SYSTEM CONTENT & SPECIFICATIONS
Housing sumps and filter heads: FH20Bx_L
Pressure gauge and brass extension: KCGA-1 and KCGA-1-E2
Centralizing and o-rings: NI-412-CENT-GR-AB and OR-N-1524X57
Feed water connectors: FXCG1-B
Wrench for filter: FXWR1BB-BL
Installation instructions (English language)
System dimensions (Height x Width x Length): 720 x 380 x 220 mm
Cartridge dimensions (Height x Outer Diameter): 20 x 4 1/2 inches
Operating temperature range (water): 2 - 45 °C (35 – 113 °F)
Operating pressure: 6 bar (90 psi)
100% factory-assembled, leak tested and ready for installation
Aquafilter HHBB10A Big Blue filter housing to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housing are compatible with a broad range of 4 1/2” x 10" type cartridges widely available on the market .Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Filter heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.Systems include:
metal platform
2 x Big Blue type filter housings
2 x pressure gauges (inlet & outlet)
wrench
2 x antibacterial and antimicrobial filter centralizing ring
System is equipped with either 10" Big Blue filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue type cartridges.Features :
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 10" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Blue sump: PP
Head filter: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Thread: 1" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 43ºC
Aquafilter OR-H10-1 set bottom (blue) and top (black ) O-rings for filter housing: Top O-ring for filter housing: H10A, H10B, H10B-AB, H10C, H10D, H10K, H105.
10” in-line set Big Blue type: Big Blue type filter housing, with blue sump and pressure relief valve, mounting bracket with screws, wrench, bacteriostatic filter centralizing ring, instruction and colour box. Available with: 1", 1 1/4", 1 1/2" BSP connection. Head is equipped with pressure relief valve which enables release of air accumulated after cartridge replacement.Features:
High quality
NSF certified
FDA CFR Title 21 Compliance
Factory Tested
Domestic and commercial use
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Ideal for POE use
Equipped with filter bracket, wrench and pressure gauge
Equipped with antibacterial and antimicrobial filter centralizing ring
Full flow 1” ports
Made in EU with High Performance
Components
Specifications:
Housing: PP
Cap: PP
Pressure relief valve: brass
O-ring: NBR
Thread: 1" BSP
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 43°C
Aquafilter FH20B1-B-WB 1" BSP Big Blue type filter housing offer the versatility to meet all customer large capacity filtration needs.
Aquafilter FH20B1-B-WB 1" BSP are dedicated for high flow cold water on commercial and industrial applications.
Aquafilter FH20B1-B-WB 1" BSP housing are compatible with a broad range of 4 1/2" x 20" type cartridges widely available on the market.
This housing can be used in a commercial setting due to its high efficiency. Filter housing consists of housing sump and filter head with brass 1” inlet/outlet inserts.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure).Features:
High quality
NSF certified
FDA CFR Title 21 Compliance
Factory Tested
Domestic and commercial use
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Ideal for POE use
Equipped with filter bracket, wrench and pressure gauge
Equipped with antibacterial and antimicrobial filter centralizing ring
Full flow 1” ports
Made in EU with High Performance components
Specifications:
Housing: PP
Cap: PP
Pressure relief valve: brass
O-ring: NBR
Thread: 1" BSP
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 43°
Aquafilter FHPRN34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN34-B1-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN34-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 3/4” BSP ports- Made in EU with High Performance Components
Efficient Filtration System
Upgrade your water filtration system with the Aquafilter filter housing FHPRCL12-B-TWIN. This system is designed for 1/2" BSP filters, providing efficient removal of contaminants for clean and fresh drinking water. The dual ports allow for easy installation under your sink, saving space and keeping your kitchen clutter-free.
Under Sink Installation
The Aquafilter filter housing FHPRCL12-B-TWIN is perfect for undersink installation, making it ideal for residential use. The compact size and sleek design ensure that it fits seamlessly into any kitchen setup. Say goodbye to bulky filter systems that take up valuable space - this system is both practical and efficient.
High-Quality Construction
Made from durable materials, this filter housing system is built to last. The 1/2" ports provide a secure connection for filters, ensuring a leak-proof operation. Trust Aquafilter for all your filtration needs - their products are known for their quality, reliability, and long-lasting performance. Upgrade to the Aquafilter filter housing FHPRCL12-B-TWIN today and enjoy clean, pure water with ease.
FHPR34-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR34-B-AQ housings can be mounted individually or connected in a seriesSpecifications:
Blue sump: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
O-ring: NBR
Number of o-rings: 2
Thread: 3/4" BSP
Maximum Pressure: 6 bar (90 psi)
Minimum temperature: 2ºC
Maximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRN12-B-TWIN 1/2" BSP two stage system with two blue filter heads with 1/2" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN12-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 1/2" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
Aquafilter FHPR1-HP1 1" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR1-HP1 1" BSP housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR1-HP1 1" BSP filter housing consist of a transparent sump and head with 1” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR1-HP1 housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1" BSPMaximum Pressure: 10 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 45°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 1” BSP ports
Made in EU with High Performance Components
Aquafilter FHPRN12-B1-AQ 1/2" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN12-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN12-B1-AQ filter housing consist of a blue sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN12-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 1/2” BSP ports- Made in EU with High Performance Components
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Aquafilter FHPR34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.FHPR34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR34-B1-AQ filter housing consist of a transparent sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.The FHPR34-B1-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:
High quality
NSF certified for structural integrity and material requirements
FDA CFR Title 21 Compliance
Factory Tested
Two O-rings for maximum leak proof protection
Domestic and commercial use
Equipped with filter bracket, wrench and cartridge
Ideal for POE or POU use
Full flow 3/4” BSP ports
Made in EU with High Performance Components
Aquafilter filter housing FHPRN34-B-TWIN 3/4" BSP two stage system with two blue filter heads with 3/4" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN34-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 3/4" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
Aquafilter OR-H10-1 set bottom (blue) and top (black ) O-rings for filter housing: Top O-ring for filter housing: H10A, H10B, H10B-AB, H10C, H10D, H10K, H105.
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for Ø 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for Ø 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Aquafilter filter housing FHPRN34-B-TRIPLE 3/4" BSP three stage system with three blue filter heads with 3/4" BSP brass inserts, and three blue filter housing sumps, wrench and color box.Set includes:FHPRN34-B-TRIPLE 3/4" BSP system, wrench, 3 bacteriostatic centering rings, instruction and color box.Specifications:Thread Diameter: 3/4” BSPWorking Temp.: 2°C - 43°CWorking pressure: 6 bar (90 PSI)Clear Filter Housing (Sump) - Material: PETFilter Housing Cap - Material: PPNumber of O-rings inside filter housing head: 2Pressure Relief Valve: Yes
Pentair Big Clear Filter Housings offer the versatility to meet all of your large capacity filtration needs, including high-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity, reducing the number of vessels required for high flow-rate applications. Sumps are available in both 10" and 20" lengths.Big Clear Filter Housings offer on-site examination of flow, performance, and cartridge life and are ideal for a variety of applications. The 1" polypropylene caps are available with a pressure-relief button on the inlet side to relieve pressure inside the housing and are available in 10" and 20" lengths.Caps are constructed of reinforced polypropylene. The 10" sumps are made of Lexan® and the 20" sumps are SAN (Styrene acrylonitrile)Features, Options, & Benefits
Large capacity housing suitable for high flow applications
Available in 10" and 20" lengths
Pressure relief/bleed on inlet side of cap
Accepts 4-1/2" diameter cartridges
Specifications
Housing - Styrene Acrylonitrile (clear)
Cap - Reinforced polypropylene
Button Assembly - 300-Series stainless-steel, EPDM, and polypropylene
Maximum Temperature - 38°C
•Maximum Pressure - 10": 6.9 bar, 20" 6.2 bar
Standard Filter Housings are manufactured of a durable polypropylene or clear Styrene-Acrylonitrile (SAN). All are equipped with 3/4" NPT inlet and outlet ports. Standard Filter Housings are available in both 10" and 20" lengths and will accommodate a wide range of 2-1/2" to 2-7/8" diameter cartridges. The reinforced polypropylene cap offers an optional pressure relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges.Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps offer on-site examination of the cartridge.Opaque Standard Filter Housings are moulded from rugged reinforced polypropylene. They offer outstanding chemical compatibility and are ideal for use in a variety of low-flow applications.Clear Standard Filter Housings offer on-site examination of flow, performance, and cartridge life. They are ideal for a variety of applications.Features, Options, & Benefits
Ideal for a wide range of applications, including residential, commercial and industrial
Available in 10" and 20" lengths
Optional pressure relief/bleed button on inlet side of cap
Thick walls for increased strength
Leak-proof sealing with top-seated Buna-N O-ring
Available with clear or opaque sumps
Specifications
Housing - Polypropylene (opaque) or Styrene Acrylonitrile (clear)
Cap - Reinforced polypropylene
Button Assembly - 300-Series stainlesssteel, EPDM, and polypropylene
Temperature Rating - 4.4-51.7°C
Maximum Pressure - 125 psi (8.6 bar)
NSF CertificationsThe 150001, 150002, 150067, 150068, 150071, 150072, 150435 and 150436 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements.Part numbers: 150071, 150072, 150435, 150436, 150106, 150096
Manufactured from polycoated 316L stainless steel, the Standard range of multi-round filter housings uses an industry standard V-band clamp to secure the head. The housings have threaded ports and they come supplied complete with a universal cartridge plate.
The Standard range is capable of operating up to 700lpm, with flow rates beyond this capacity requiring the Premier range. From the 7 x 40″ housing down to the 3 x 10″, these smaller vessels do not require the additional heavy duty features of the Premier range, such as Davit assemblies and swing-bolt lids. With gauge ports, drain ports and a universal cartridge adaptor to accept AA, DOE and 222 end capped cartridges, this range offers a competitive solution for smaller flow rate applications.
Key Product Features
V-Clamp closure for a secure seal
Universal cartridge adaptors securely hold 222, DOE or AA cartridges
Drain ports allow for quick and easy cartridge changeout
Gauges ports come fitted with 316L plugs when gauges are not required
Technical Data
SPECTRUM Inox 3/5/7 Standard Filter Housings Technical Data Sheet
Drawings
SPECTRUM Inox Standard Filter Housing 3 Round DrawingSPECTRUM Inox Standard Filter Housing 5 Round DrawingSPECTRUM Inox Standard Filter Housing 7 Round Drawing
Aquafilter Filter Housing FHPRCL12-B-TRIPLE 1/2" BSP
This high-quality Aquafilter filter housing is perfect for both residential and industry use. Designed to accommodate a triple 1/2" BSP filter configuration, this housing ensures efficient water filtration for a variety of applications.
Premium Filtration for Clean Water
With the Aquafilter Filter Housing FHPRCL12-B-TRIPLE, you can trust that your water is clean and safe for drinking, cooking, and other uses. The durable construction of this housing is built to withstand daily use and provide reliable filtration performance.
Easy Installation and Maintenance
Installing and maintaining this filter housing is a breeze, thanks to its user-friendly design. Whether you're a homeowner looking to improve your water quality or a business owner in need of a dependable filtration solution, this Aquafilter housing is an excellent choice.
High-Quality Bracket Kit
This Pentair BB & PBH Housing 316 Stainless Steel plated bracket kit is a durable and reliable accessory designed to enhance the performance of your water filtration system. Made from high-quality stainless steel, this bracket kit is built to last and withstand the rigors of daily use. The sleek design adds a touch of elegance to your filtration system while ensuring secure installation.
Easy Installation Process
With this kit, you'll receive all the necessary screws for a hassle-free installation process. The included screws are specifically designed for use with the Pentair BB & PBH housing, ensuring a perfect fit and easy assembly. Whether you're a DIY enthusiast or a professional installer, you'll appreciate the convenience and simplicity of installing this bracket kit.
Secure Your Filtration System
Ensure the stability and security of your Pentair BB & PBH housing with this stainless steel plated bracket kit. By securely mounting your filtration system with this kit, you can have peace of mind knowing that it will remain in place and function effectively. Take your water filtration to the next level with this reliable and sturdy bracket kit.
Filter housing brackets allow for housings to be attached in a fixed location which facilitates easy installation, maintenance and on-going filter change. Double and Triple brackets offer the solution for multiple housing connections. Bracket kits include appropriate screws for quick installation.
