This complete 7 stage reverse osmosis system is ready to install made by Aquafilter. Made of NSF and WRAS certified components. Due to the high membrane quality it is possible to purify up to 280 litres of water per day. Small micron rating 0,0001 µm, allows to remove most contaminants from water including bacteria and viruses. System is equipped with post filtration carbon cartridge (AICRO), which improves the taste and aroma of water and AIMRO mineralising cartridge, which enriches water with elements such as calcium and magnesium.Set includes: RX-RO6-NN system, FCCA, FCCBL, FCPS20 sediment filter,(one extra sediment filter 5 micron), AICRO, AIMRO cartridges and TFC-75F-AQM RO membrane, FXFCH5 faucet, feed water connector 1/2″, tubing, tank, instruction, and accessories.If your water pressure is less than 2.8bar, we recommend you choose the pumped system.
Please find a link to the Instructions here. A QR Code linking to instructions is included in the box.
We recommend using a plumber or other suitable tradesperson for the installation of these systems.
UsesDrinking water for home and office Aquarium waterwindow cleaning
What we offer7 stage complete Ro filter system 75 GPD.(Stage 1) 20 Micron Sediment Filter: FCPS20 or FCPS5(Stage 2) Activated Carbon Block Filter: FCCBL(Stage 3) Carbon Block Filter: FCCA(Stage 4) Reverse Osmosis Membrane 75 GPD per day: TFC-75F-AQM(Stage 5) Post Carbon filter: AICRO(Stage 6) Mineral cartridge: AIMRO(Stage 7) Ionizing Cartr0dge: AIFIR2000.
FeaturesConnectors type: Quick connect fittings3.2 Gallons NSF Standards Water Storage Tank: PRO3200PNSF Approved 3 Filter Housings (double o’ring): 3 whiteMounting bracket: Plastic type Automatic Shut-off Valve:AJ-S-3000WFlow Restrictor: 420cc AQ-FR-420Attractive design faucet: FXFCH5Feed water connector and deliver valve: FT06P, AQ-SEWBV1414-PPDrain Saddle Valve:AJ-SC500B14White Colour Coded 1/4 inch Tubing for System ConnectionAssembled &100% Factory leak tested ready for Installation
Technical FeaturesMembrane: 75 GPD / 283 LPDOperation pressure: 2.75 – 5.5 bar (40 -80 psi)Tank Pressure: 8 psiDimensions: (cm) 37 (L) x 45(H) x 20 (W) – system (cm) 28 (L) x 28(W) x 35 (H)- tank
10” in-line set: filter housing, with pressure relief valve and transparent sump, mounting bracket with screws, wrench, cartridge, bacteriostatic filter centralizing ring, instruction, color box. Available with brass inserts: 1/2", 3/4" or 1" BSP. The design in combination with two O-rings (one inside filter head and second on the edge of filter sump), ensures maximum leak proof performance.FHPR12-B1-AQ - 1/2"FHPR34-B1-AQ - 3/4"FHPR1-B1-AQ - 1"
The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. ACS-1 series uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
Aquafilter offers FCPS cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polypropylene filter media, FCPS series removes solids in suspension in a wide range of micron rating, protecting your water stream and enhancing a continuous supply of fresh and clean drinking water.
10x Genuine Aquafilter 10" x 2.5” 1,5,10,20,50 Micron Sediment Removal Water Filter Cartridge FCPS5AQUAFILTER FCPS5 series cartridges are NSF certified using FDA approved polypropylene for material requirements.The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities.FCPSx uses no resin binders, lubricants, anti-static or release agents or other chemical additives.The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene micro-fibres into a complex filter matrix.Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.Polypropylene fibres are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential plumbing systems.FCPSx series cartridges are an ideal true depth filters and can be used for filtration of cold potable water.Aquafilter wide range of melt-blown cartridges has multiple fibre zones.These multi-fibre zones provide a graded pore structure throughout the filter's depth.Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter.The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure.Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs.The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs
Features:
NSF approved product with FDA CFR Title 21 Compliance
85% efficiency at stated nominal micron rating
Multi-layer construction gives true graded depth filtration, high dirt holding capacity and long service life
Constructed from 100% polypropylene without added binders, resins or adhesives
Provides consistently efficient filtration with low inlet pressure
Chemical resistant and prevents development of micro-organisms
Made in the EU with High Quality materials
Specifications:
Filter Media: PP
Min. Feed Water Temp. 2°C (35º F)
Max. Feed Water Temp. 60°C (176ºF)
Length: 10"
Outer Diameter: 2.5"
Avg. Efficiency: 90%
Maximum Flow: 30 lpm
Filter Life: 6 months*
10” three stage system with three blue filter heads with BSP brass inserts, and three transparent filter housing sumps, wrench and colour box. Set includes: 3 stage systemSystem is available with several connection types: FHPRCL12-B-TRIPLE - 1/2" BSP.FHPRCL34-B-TRIPLE - 3/4" BSP
10” two stage system with two blue filter heads with BSP brass inserts, and two transparent filter housing sumps, wrench and color box.Set includes: FHPRCLx-B-TWIN system, wrench, 2 bacteriostatic centering rings, instruction and color box.System is available with several connection types:FHPRCL12-B-TWIN - 1/2" BSP,FHPRCL34-B-TWIN - 3/4" BSP.
Systems consist of Big Blue ® filter housings to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housings are compatible with a 4 1/2” x 20" type cartridges widely available on the market. Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.System is equipped with either 20" Big Blue ® filter housings in blue colour, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue® type cartridge
Product features:
High quality
Hand Built & Factory Tested
Equipped with antibacterial and antimicrobial filter centralizing ring
Ideal for family use as POE
Easy to connect to cold water inlet
Easy to install, No Electricity, No Drain Required
Heavy-duty filter housings
Full flow 1"ports
Large capacity housing suitable for high flow applications
Pressure relief/bleed on inlet side of cap
Compatible with most 4 1/2" x 20" type cartridges available on the market
Housings are NSF approved for structural integrity and material requirements
Easy to install with System Specifications
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Housing: PP
Cap: PP
Inserts: brass
Pressure relief valve: brass
No. of pressure gauge: 2
O-ring: NBR
Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC (35ºF)
Maximum Temperature: 45°C (113°F)
Dimensions (H x W x L) HHBB10B: 720mm x 540mm x 220mm
Cartridge dimensions HHBB10B: 20" x 4 1/2" (508 mm x 115 mm)
System includes:
1 x metal platform
3 x big blue type filter housings (20")
2 x pressure gauges (inlet & outlet) with nickel extension to the pressure gauges
3 x antibacterial and antimicrobial filter centralizing ring
1 x full instructions
1 x wrench
Aquafilter ACS-2 series cartridges are made of FDA approved polypropylene string wound yarn on a polypropylene core which strengthens the cartridge. It has a broad chemical compatibility, good temperature resistance and low cost. ACS-2 series cartridges are primarily used as the first stage of filtration. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
Cartridges made of polypropylene yarn (FDA compliant). They remove sediments such as sand, silt, rust and suspended solids. Products dedicated to cold water filtration.Available sizes: 10", 20", 10"BB, 20"BBAvailable micron rating: 1, 5, 10, 20, 50, 100
10" high efficiency in-line system Big Blue® type with metal platform, pressure gauges and connection adapters. Housing head is equipped with pressure relief valve and brass connection 1" BSP. Depending on water quality, system can be freely configurated using mechanical, carbon or specialty cartridges. Metal platform stabilizes the system.Set include: HHBB10B system, 2 pressure gauges, wrench, 3 bacteriostatic location rings, instruction.
Aquafilter FCPP series cartridges are made of FDA-approved polypropylene string wound on a polypropylene core which strenghtens the cartridge. It has a broad chemical compatibility, good temperature resistance and low cost. FCPP1 series cartridges are primarily used as the first stage of filtration of cold potable water. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems.Specifications:Filter media: PPCore: PP or PETNominal micron rating: 1, 5, 10, 20, 50, 100Min. feedwater temp. 2°CMax. feedwater temp. 65°CLengths: 10"Outer diameter: 2 1/2”Inner diameter: 1,1”Avg. Efficiency: 90%
Aquafilter FCPRA-10 10"Anti-scale cartridges filled with polyphosphate. Aquafilter FCPRA-10 Series cartridges are filled with polyphosphate, anti-scale and anti-lime media. Polyphosphate prevents scale by reacting with dissolved hardness minerals (e.g. calcium carbonate and calcium bicarbonate) and transforming them into harmless, microscopic crystals of calcium orthophosphate. These crystals stay suspended in water and will not create scale build-up in heating elements, pipes, water heaters, boilers, etc. Moreover polyphosphate helps to deal with iron and all the problems which it causes. Polyphosphates do not remove iron from water. Rather they stabilize and disperse the iron so that the water remains clear and does not produce iron stains. FCPRA-10 series filter cartridges require very little maintenance, no backwashing and no salt. The filters were designed such that water flows from bottom to top, ensuring a long contact time, allowing maximum performance. Cartridges include pre- and postfilters preventing media particles from being washed out.Specifications:
Media: polyphosphate
Filter Life: 3-6 months
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 45°C
Contaminant Removal: iron, manganese, scale
Gasket: Silicone
Body: PS
Post-filter: PP
Aquafilter TLCHF-2T In-line ultrafiltration membrane 0.01 micron cartridge 1/4" NPT. Compatible with most under-counter systems available on the market. Due to the small pore size (0,02 micron) in combination with its unique structure, which decreases from the outside to the inside, the membrane is capable of removing various contaminants such as: sand, silt, rust and other suspended impurities, most bacteria, and some viruses. Large sediment particles are blocked near the capillary surface (surface filtration) and smaller ones flow inside until they are captured by smaller pores (depth filtration). Unlike RO membranes, UF membranes are characterized by zero rejection ratio which in turn leads to quicker and more efficient delivery of clean water. Moreover hollow fiber UF membranes leave beneficial minerals intact. TLCHF-2TF is designed for cold potable water filtration. Aquafilter TLCHF-2TF Ultra filtration membrane. Fits most 1/4” water lines and requires no additional tools for installation.Specifications:
Size: 10" x 2"
Micron rating: 0.02 microns
Filter Life: 6-12 months
Max pressure: 3,5 bar
Min temp.: 2'C
Max temp.: 45'C
