For use in the PBH plastic bag housings, this range of bags proves a simple and economic solution for the removal of particulate. PBH bags are uniquein design, fitting in an internal support basket to maximise the filtration surface area and are easy for operators to changeout. Available in washable nylon mesh in 50 to 600 micron and in polypropylene felt in 1 to 200 micron.BP Series (Polypropylene Felt)
Filtration ratings from 1 to 200 microns to comply with any filtration requirement
Manufactured from felt due to its high solids loading capabilities versus similar mesh fabrics
The media is created by needle-punching two layers of synthetic fibres together in a supporting scrim
A glazed finish, created by melting the outermost surface fibres, is used to product a bond that reduces the possibility of migration
Features and Benefits
Semi-rigid cylindrical design is easily crushed and incinerated
For use with Pentair Pentek PBH-410 Housing
Higher productivity – faster bag “change-outs”
Thermally welded unique design results in consistent filtration efficiencies
Nominal 1-800 micron ratings
Aquafilter FHPR12-B-AQ 1/2" BSP filter housing is dedicated for cold water on residential and commercial applications.FHPR12-B-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPR12-B-AQ filter housing consist of a transparent sump and head with 1/2” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).A transparent sump allows for the evaluation of cartridge contamination.Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.The FHPR12-B-AQ housings can be mounted individually or connected in a seriesSpecifications:Clear sump: PETCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 1/2" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°CFeatures:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Ideal for POE or POU use- Full flow 1/2” BSP ports- Made in EU with High Performance Components
Set contains
FCPS5 sediment cartridge
Premium FCCBL-S Silver Series activated carbon block cartridge with cation exchange based resin
FCCST Water softening cartridge
Stage 1Sediment filter removes sand, rust, silt and other sediments up to 5 micron
Stage 2Activated carbon block cartridge removes levels of Chlorine, Organic Compounds, Pesticides, Herbicides, Trihalomethanes and Volatile Organic Compounds (VOCs). Additionally, the cation exchange based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean water.
Stage 3FCCST Water softening cartridge. Through its accurate media consisted of ion exchange-based resin, FCCST reduces calcium, magnesium and iron concentration. In case your feed water contains a high concentration of suspended matter. The softening effect takes place within the filter without adding any salt or chemicals into the water. The filter removes harmful substances and reduce limescale, prolonging life-span of your home appliances such as washing machine or dishwasher and saving you money.
Specifications
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Aquafilter FCCBHD10BB 10" Big Blue ( 10"x 4 1/2") GAC coconut shell series cartridges have been our most popular carbon cartridges for years. GAC-type cartridges are designed such that water flows from bottom to top, ensuring long contact time, allowing for maximum adsorption and treatment. Utilizing a highly efficient longitudinal flow for greater carbon contact time, FCCBHD10BB is ideal where a long contact time allows for high chlorine as well as other organic reductions. Using a clean, water-washed NSF approved coconut shell activated carbon with a large mesh size, this granular range is primarily a chlorine, taste and odour reduction cartridge with the advantage of a post-filter pad to prevent carbon from being washed out and to avoid blockage if high particulate is present. According to internal laboratory studies cartridge removes 99% of free chlorine, 85% of certain pesticides, solvents, aromatic hydrocarbons, fenol, benzen and other organic compounds.Specifications
Media: FDA and NSF
approved Coconut Shell GAC
Filter Life : 6 -12 months
Size : 10” x 4 1/2”
Operating Pressure: 6 bar
Min. feedwater temp. 2°C
Max. feedwater temp. 55°C
Contaminant Removal: Chlorine, VOC's
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Aquafilter FHPRN34-B1-AQ 3/4" BSP filter housing is dedicated for cold water on residencial and commercial applications.
FHPRN34-B1-AQ housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRN34-B1-AQ filter housing consist of a blue sump and head with 3/4” inlet/outlet brass inserts and two O-rings (one placed around sump thread and the other inside filter head).
Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilization of two O-rings ensures maximum leak-proof performance.
Filter housing set includes: mounting bracket with screws, sediment cartridge (FCPS5 - 5 micron), wrench and bacteriostatic filter centralizing ring.
The FHPRN34-B1-AQ housings can be mounted individually or connected in a series
Specifications:Blue sump: PPCap: PPInserts: brassPressure relief valve: brassO-ring: NBRNumber of orings: 2Thread: 3/4" BSPMaximum Pressure: 6 bar (90 psi)Minimum temperature: 2ºCMaximum temperature: 43°C
Features:- High quality- NSF certified for structural integrity and material requirements- FDA CFR Title 21 Compliance- Factory Tested- Two O-rings for maximum leak proof protection- Domestic and commercial use- Equipped with filter bracket, wrench and cartridge- Ideal for POE or POU use- Full flow 3/4” BSP ports- Made in EU with High Performance Components
AQUAFILTER FCCEL20 cartridges are manufactured from durable polyester non-woven fabric. They contain no binders or cellulose and have been developed specifically for drinking and bottled water applications. In order to provide increased surface area and longer life, FCCEL20 series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. FCCEL20 series cartridges provide great sediment removal and dirt holding capacity to extend the time between cartridge changeouts. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect boilers and pluming systems. Utilizing 100% synthetic media makes FCCEL20 series cartridges washable and reusable. If the cartridge becomes clogged you can easilly clean it by direct spray into pleats to dislodge sediment or let dry and brush off filter cake from surface of the media. FCCEL20 series cartridges are bacteria and chemical resistant. They are characterized with very low pressure drop.FCCEL20 series cartridges are typically used as a first stage of potable water filtration.Specifications:
Micron rating: 20
Lengths: 10"
Outer diameter: 2 1/2"
Inner diameter: 1,1"
Min. feedwater temp. 2°C
Max. feedwater temp. 60°C
Avg. Efficiency: 87%
Aquafilter FCCFE 10" Iron reducing and pH adjusting cartridge. Aquafilter FCCFE series cartridges are an effective and efficient solution for point-of-use and point-of-entry applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters preventing media particles from being washed out. Cartridges, are available in various capacities to meet the Customers demands. FCCFE was designed to allow optimal contact between water and the resin therefore ensuring maximum performance (iron and manganese removal). FCCFE utilizes NSF approved media which increase pH and reduce the concentration of iron and manganese in water. Iron in a concentration as low as 0,3 mg/l can become a source of yellow to dark-brown stains often found in sinks, toilets and other plumbing fixtures. If iron is present in detectable amounts it can ruin the taste of tea, coffee and beverages. Iron salts may irritate skin. Manganese is much more annoying than iron. Even low concentrations of this element ( > 0,05 mg/l) create dark-brown or black stains on everything with which it comes in contact. Both manganese and iron form deposits inside piping systems, which (after a while) may severely reduce flow.Specifications:
Media: NSF approved Birm and Corosex
Filter Life: 3-6 months
Size : 10" x 2 1/2"
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Contaminant Removal: iron, manganese
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
The Replacement Quartz Sleeve for Philips G30T8 and G55T8 UV Light Bulb for Germicidal Water Treatment is an open ended, high quality quartz sleeve that works well with water sterilisation filters, UV sterilisers and purifiers.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
HVAC and Air Conditioning units
Air purifier/treatment systems
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Surface disinfection
Marine and more
The MA9070 Zero Oxygen Calibration Solution Kit is made up of two components for use in calibrating the Milwaukee MW600 DO Meter.
Design Features
Easy to use
Simple mix the two components and place in solution to quickly calibrate to 0% oxygen concentration
Traceable
Product labeled with product code, lot number and expiration date
Secure
Air tight bottle with tamper-proof seal
MA9016 is a lab grade electrode cleaning solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens.
Your accuracy and speed of your results are dependent on your pH sensing bulb and ORP platinum tip being clean. pH and ORP electrodes also need a free flowing junction to function.
Milwaukee's cleaning solution helps both keep sensing parts clean and the junction open. Simply open the bottle, fill a beaker or container so that the level covers the sensor and junction, and soak for 15 to 20 minutes followed by a soaking in MA9015 storage solution for at least 2 hours.
DESIGN FEATURES
Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings.
Specially formulated for cleaning electrodes
Factory blended to precise standards in a dedicated, temperature controlled environment.
Sealed against light with air tight, tamper proof cap.
Each bottle marked with lot number and expiration date.
Basic technology that works, the SPECTRUM Wound range is perfectly suited as a pre-filter to protect more expensive secondary or final filtration systems.The SPECTRUM Wound polypropylene range is offered in a wide span of micron ratings (0.5 to 150), offering cost effective particulate filtration with a tried and tested history to prove it.General use, polypropylene-on-polypropylene corePolypropylene (max temp. 65°C)Easily the most popular cartridge media, having a broad chemical compatibility, good temperature resistance and low cost, this standard and large diameter filter is an effective solution for many applications.Features & Information
Exact computer controlled wound pattern delivers reliable particulate removal throughout its media
Available in a wide range of micron sizes from 0.5 - 150 are available in standard diameter, 10" to 40" lengths
Available in large diameter 10" and 20" lengths for reduced cartridge changeout frequency
Constructed with polypropylene media on a polypropylene core
Graded density construction ensures high dirt-holding capacity
Applications & Industries
Sand, silt and rust removal
Manufacturing chemicals
Metal finishing
Surface coating
Valve, pump or nozzle protection
