Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out.Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
The Hailea - T10000 Pond Pumps are without doubt one the best value pumps on the market today.
These T10000 Pond Pumps represent great value for money they are also a low wattage pump and most of all ultra reliable.
The whole Hailea T range can either be used dry inline just like the Aquamax pumps , or submerged therefore making them totally at home most environments. They have the same 1.5 inch threaded inlet and outlet
The T - Pump also has a built in thermal overload safety device to protect the pump.
Hailea Pump range are now the best selling range of pumps on the market today
Specifications
Dimensions: 359 x 135 x 162mm
Power consumption: 147 Watts
Turnover rate: 10000ltrs/hr (2222) gls
Head: 4.2
Weight: 4.5 kg Approx
Voltage: 220-240v/50Hz
Cable Length: 10 Meters
Inlet - Outlet Size: 1.5 inch BSP - inlet - Outlet 1.5 inch BSP
Aquafilter offers HHBB20A 2-Stage Whole House Big Blue® filtration System suitable for POE (Point of use) installations. HHBB20A housings are compatible with a broad range of cartridge types available on the market. Additionally, pressure drop can be monitored through the two pressure gauges located in the inlet and outlet positions of the system besides the microbial protection conferred by blue colored-housings in sunny locations. Equipped with pressure relief valves and a rounded bottom which increases stress resistance, HHBB20A ensures a continuous supply of fresh and clean drinking water.
SYSTEM CONTENT & SPECIFICATIONS
Housing sumps and filter heads: FH20Bx_L
Pressure gauge and brass extension: KCGA-1 and KCGA-1-E2
Centralizing and o-rings: NI-412-CENT-GR-AB and OR-N-1524X57
Feed water connectors: FXCG1-B
Wrench for filter: FXWR1BB-BL
Installation instructions (English language)
System dimensions (Height x Width x Length): 720 x 380 x 220 mm
Cartridge dimensions (Height x Outer Diameter): 20 x 4 1/2 inches
Operating temperature range (water): 2 - 45 °C (35 – 113 °F)
Operating pressure: 6 bar (90 psi)
100% factory-assembled, leak tested and ready for installation
Aquafilter FCPS20-L 20" series cartridges are NSF certified using FDA approved polypropylene for material requirements. The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. FCPS20-L uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. Polypropylene fibers are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems. FCPS2-L series cartridges are an ideal true depth filters and can be used for filtration of cold potable water. Aquafilter wide range of melt-blown cartridges has multiple fiber zones. These multi-fibre zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:Filter media: PPFilter life: up to 6 monthsMin. feedwater temp. 2°CMax. feedwater temp. 80°CNominal micron rating: 20Lengths: 20"Outer diameter: 2 1/2”Inner diameter: 1.1”Avg. Efficiency: 90%
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
The MA9071 electrolyte fill solution is designed for Milwaukee's polarographic dissolved oxygen probe. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe.
DESIGN FEATURES
PRECISE FORMULATION
Factory mixed using reagent grade chemicals in a dedicated, temperature controlled environment.
TRACEABLE
Product labeled with product code, lot number and expiration date.
SECURE
Air tight bottle with tamper-proof seal.
USE AND CARE
“OPEN AIR” CALIBRATION PROCEDURE FOR THE MW600 DISSOLVED OXYGEN METER
1. Remove the membrane
Take the membrane off the end of the probe and dry the diode off.
2. Zero out the display
Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.
3. Fill the membrane
Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)
4. Attach the membrane
Screw the membrane on to the probe.
5. Let stabilize
Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)
6. Adjust
Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.
You are now calibrated.
EXTRA TIPS
Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
Always use fresh electrolyte solution (MA9071).
The Replacement Quartz Sleeve for Philips G30T8 and G55T8 UV Light Bulb for Germicidal Water Treatment is an open ended, high quality quartz sleeve that works well with water sterilisation filters, UV sterilisers and purifiers.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
HVAC and Air Conditioning units
Air purifier/treatment systems
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Surface disinfection
Marine and more
Hailea Water Chiller HC500A 500 Litre Cooling Capacity
The all new Hailea HC500A chiller has a strong metal chassis with a housing of contemporary design, ensuring the chiller does not look out of place in any surroundings and as with other cooling units, The HC500A series use the environmental friendly refrigerant R134a and operates down to temperatures of 4°C where required.Electronic control on is this model ensures accurate control of temperature to 0.1 DegC increments. An excellent unit to use with hydroponics and aquarium thanks to the tough titanium heat exchanger. The HC500A is designed for hydroponics and aquarium systems with a water capacity of 500 Litres. Recommended water pump flow rates of 1200 to 3000 Litres/Hour.
Key Product Data:
High Output 550 Watt
Digital read-out (precise to 0,1°C increments)
New more robust design for longer life
Lowered noise output quieter than a standard refrigerator
Suitable for continuous operation
Auto restart after power outage
Refrigerant R134a
Titanium heat exchanger
Recommended Flow (LPH) 1200 - 3000
Suitable for aquariums up to 500L
Dimensions : 475×360×490mm
Includes Fittings
The Pentek QC10-TSGACR Under sink Quick-Change Replacement Filter Cartridge features a quick-change design that makes filter replacement easy. It provides superior taste and odour reduction properties and is designed to prevent scale build-up. Its high-efficiency design provides up to 6 months of clean, clear, great tasting water.
Easy to install, easy filter change
Filter life 1700 gallons (6435 L)
Flow rate 0.75 gpm (2.8 L/min)
PENTEK's quick-change filter system applications include:
under-sink drinking water
refrigerator/icemaker
pre/post RO membrane
vending machine
ice machine
coffee machine
other OEM applications
The Milwaukee MW101 PRO pH meter has won fans around the world with its reliable, fast operation as well as its rugged design and accuracy.
WHAT PEOPLE ARE SAYING
"This is an awesome pH meter!"
"I love this little meter."
"Rugged portable meter, calibrates easily with pH 4, 7 and 10 buffers, readings dead on."
SUMMARY
The Milwaukee MW101 PRO pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy.
The Milwaukee PRO pH Meter is preferred by people testing samples that cause other pH testers and meters to fail from brewers and wine makers to hydroponic growers and farmers.
The Milwaukee PRO pH meter offers:
SPEED
The MW101 delivers fast results to ±0.02 pH accuracy with two point calibration.
TOUGHNESS
The rugged meter is designed to take knocks. Paired with low maintenance, lab grade SE220 double junction, gel filled electrode, the MW101 is ideal for everyone from educators and pool professionals to brewers and growers.
DESIGN FEATURES
Fast easy to read results with large digital LCD readout.
Accurate to ±0.02 pH with a 0.00-14.00 pH range.
Lightweight and portable.
Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
Simple manual two-point calibration for increased accuracy.
Gel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage (SE220 probe included).
3 feet probe cables for extra flexibility when testing.
Auto shut off and low power demand for approx. 300 hours of continuous use. (battery included)
USE AND CARE
pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.
SENSING BULB
The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.
REFERENCE JUNCTION
The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.
You can extend the life of your pH electrode in the following ways.
CLEANING AND STORAGE
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee codes MA9015 and MA9016 at checkout time! This will be needed to help clean and condition the pH electrode before use!
STORAGE
The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.
Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.
The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.
CLEANING
Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.
CALIBRATION
The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
Aquafilter FCCFE20BB 20" Big Blue Iron reducing and pH adjusting cartridge. Aquafilter FCCFE20BB series cartridges are an effective and efficient solution for point-of-use and point-of-entry applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters preventing media particles from being washed out. Cartridges, are available in various capacities to meet the Customers demands. FCCFE20BB was designed to allow optimal contact between water and the resin therefore ensuring maximum performance (iron and manganese removal). FCCFE20BB utilizes NSF approved media which increase pH and reduce the concentration of iron and manganese in water. Iron in a concentration as low as 0,3 mg/l can become a source of yellow to dark-brown stains often found in sinks, toilets and other plumbing fixtures. If iron is present in detectable amounts it can ruin the taste of tea, coffee and beverages. Iron salts may irritate skin. Manganese is much more annoying than iron. Even low concentrations of this element ( > 0,05 mg/l) create dark-brown or black stains on everything with which it comes in contact. Both manganese and iron form deposits inside piping systems, which (after a while) may severely reduce flow.Specifications:
Media: NSF approved Birm and Corosex
Filter Life: 3-6 months
Size : 20" x 4 1/2"
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Contaminant Removal: iron, manganese
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
