Aquafilter set of 3 replacement cartridges set:
FCPP5 - polypropylene yarn cartridges
FCCBL-G - silver series carbon block
FCCBKDF- coconut shell granulated activated carbon (GAC) with KDF media
Filter Life: up to 6 months or 37000 litres
Aquafilter set of 3 replacement cartridges set:
1 x FCPS5 - melt-blown 5 micron sediment filter cartridge
2 x FCCBL - carbon block cartridge
Filter Life: up to 6 months or 16000 litres.
Aquafilter set of 3 replacement cartridges set:
FCPP5 - polypropylene yarn cartridges
FCCBL-G - silver series carbon block
FCCBKDF2- coconut shell GAC carbon cartridge with KDF and softening media
Filter Life: up to 6 months or 37000 litres
Aquafilter TFC-50F RO membrane. RO membranes consists of many thin layers of porous, semi-permeable film wound around a central core. TFC-x series membranes are compatible with most RO systems available on the market. They effectively remove 96%-99% of suspended particles, most bacteria and viruses, VOCs (not smaller than 0.0001 μm) and even ions. All filtered impurities are flushed to drain. TFC-x series membranes improve overall quality of water. Keep in mind that the performance of the RO membranes depends on water temperature and applied pressure. Low temperature of influent water will affect (lower) membrane performance. Pressure has a similar effect. In such cases, booster pump is required. Aquafilter offers TFCx-F Reverse Osmosis (RO) membrane suitable for POU (Point of Use) installations. TFCx-F membranes consist of many thin layers of porous, semi-permeable film wounded around a central core. Its small pore size (0.0001 micron) allows TFCx-F acting as a barrier against suspended particles, most of bacteria and viruses, ions and VOC’s present in your tap water. Finally, all filtrate impurities are flushed to drain, ensuring a continuous and efficient supply of clean water. TFCx-F membranes are compatible with most RO systems present on the market.
High-Quality Replacement Cartridges
Upgrade your Aquafilter FCPS5M20B, FCCBL20BB, and FCCST20B Big Blue 20 filter system with this replacement cartridges set. Each cartridge is designed to provide superior filtration performance and extend the life of your water filtration system. These high-quality cartridges ensure that your water is clean, clear, and great-tasting.
Easy Installation Process
Replacing the cartridges in your Aquafilter system is quick and easy with this convenient set. Simply follow the step-by-step instructions included with the cartridges to ensure proper installation. No special tools are required, making it a hassle-free process for anyone to complete. Keep your water filtration system running efficiently with these easy-to-install replacement cartridges.
Cost-Effective Solution
Save money on expensive bottled water purchases by maintaining your Aquafilter system with this cost-effective replacement cartridges set. Regularly replacing the cartridges helps ensure that your water remains clean and healthy for your family. With this convenient set, you can enjoy great-tasting water without breaking the bank. Invest in the longevity of your water filtration system with these affordable replacement cartridges.
Improve your household water with the Aquafilter 20" Big Blue 3-Stage Whole House Water Filter and Softener Kit.
Designed for installation on a property's incoming water supply, this three-stage filtration system combines sediment filtration, activated carbon treatment and specialist water-softening media.
Hard water contains dissolved minerals, particularly calcium and magnesium. These minerals can contribute to limescale deposits on taps, shower screens, pipework, heating elements and household appliances.
This Big Blue filtration system combines several treatment stages to help reduce suspended particles, improve chlorine-related taste and odour, and reduce hardness minerals using a dedicated softening cartridge.
Featuring three large-format 20" x 4.5" cartridges and 1" plumbing connections, it is designed for compatible domestic whole-house water-treatment installations.
Key Features
Three-stage filtration: Combines sediment, carbon and water-softening treatment.
Sediment filtration: Helps capture suspended particles such as sand, rust, silt and dirt.
Carbon filtration: Helps reduce free chlorine and improve chlorine-related taste and odour.
Hardness reduction: Uses specialist ion-exchange media to help reduce calcium and magnesium in suitable water supplies.
Whole-house application: Designed to treat incoming water before distribution around the property.
Large-format cartridges: Uses three 20" x 4.5" Big Blue filter cartridges.
1" plumbing connections: Suitable for compatible domestic plumbing installations.
Replaceable cartridges: Allows routine maintenance using compatible replacement filters.
How the Three Filtration Stages Work
Stage 1 – Sediment Filtration
The first stage helps capture suspended particles from the incoming water supply.
A suitable sediment cartridge can help reduce:
Sand
Rust particles
Silt
Dirt
Other suspended sediments
This initial filtration stage also helps protect the downstream cartridges from excessive particulate loading.
Stage 2 – Activated Carbon Filtration
The second stage uses activated carbon media to help improve water taste and odour.
Carbon filtration can help reduce free chlorine and certain substances that contribute to unpleasant tastes and smells.
The effectiveness of this stage depends on the carbon cartridge specification, incoming water quality, contact time and operating flow rate.
Stage 3 – Water Softening
The third stage uses specialist water-softening media designed to help reduce hardness minerals in suitable water supplies.
Hardness is primarily associated with dissolved calcium and magnesium. These minerals can contribute to limescale formation on plumbing fixtures, shower fittings and household appliances.
The softening cartridge uses ion-exchange technology to help reduce these hardness minerals as water passes through the filter.
Unlike a conventional regenerating water softener, a cartridge-based softening filter has a finite treatment capacity. Its performance and replacement interval depend on incoming water hardness and the volume of water treated.
What's Included?
The system is specified as a three-cartridge 20" Big Blue filtration configuration.
The matching GroAqua replacement cartridge listings identify the following types of cartridges:
1 x 5-micron sediment cartridge.
1 x activated carbon block cartridge.
1 x specialist water-softening cartridge.
The FCCST20B is listed by GroAqua as a water-softening cartridge.
Important: Confirm the exact cartridge model numbers supplied with this particular kit before ordering. Different replacement sets may use different sediment and carbon cartridge models.
Suitable Applications
This system may be suitable for:
Domestic whole-house water filtration.
Properties supplied with moderately hard water.
Reducing hardness minerals using cartridge-based treatment.
Helping address chlorine-related taste and odour.
General sediment filtration.
Compatible light-commercial water-treatment installations.
It may be particularly relevant to households looking for a combined sediment, carbon and hardness-reduction solution.
Before selecting a cartridge softener, test the incoming water hardness. This helps establish whether the cartridge capacity is appropriate for the property's water consumption.
Product Specifications
Brand: GroAqua / Aquafilter
System type: Three-stage whole-house water filter and softener
Housing size: 20" Big Blue
Cartridge configuration: 3 cartridges
Cartridge dimensions: 20" x 4.5"
Inlet/outlet connections: 1"
Maximum operating pressure: 6 bar
Listed maximum flow rate: 21 litres per minute
Published dimensions: 785 x 540 x 220 mm (H x W x L)
Specifications should be confirmed against the manufacturer's documentation for the exact product configuration.
The listed maximum flow rate should be checked carefully against the complete assembled system and the cartridges supplied. Actual flow will depend on cartridge resistance, incoming pressure, water hardness and plumbing conditions.
Installation and Maintenance
Install the system on a suitable incoming water supply using compatible 1" plumbing connections.
Allow enough space around the housings for servicing and cartridge replacement.
For reliable ongoing operation:
Check connections and housings regularly for leaks.
Monitor pressure where gauges are fitted.
Replace cartridges according to manufacturer recommendations.
Test incoming water hardness before selecting replacement softening cartridges.
Monitor treated-water hardness to assess softening performance.
Replace the softening cartridge when its treatment capacity is reached.
Cartridge service life depends on incoming water hardness, water consumption, sediment loading and operating conditions.
Important Water Softening Information
This system uses a replaceable cartridge-based softening stage to help reduce hardness minerals.
It should not be confused with a conventional automatically regenerating water softener. Cartridge-based systems have a finite capacity and may require more frequent replacement where incoming water hardness is high or water consumption is substantial.
Water testing is recommended to establish suitability and monitor performance.
This system is not a universal water purification or disinfection system. It should not be assumed to remove bacteria, viruses or every dissolved contaminant, or to make microbiologically unsafe water safe to drink.
Choose the Right Big Blue Water Treatment System
If hardness and limescale are your main concerns, this three-stage softener kit provides a combined sediment, carbon and hardness-reduction configuration.
If chlorine taste and odour are your primary concern, consider a dedicated dechlorinator system.
If iron-related staining is the problem, consider a dedicated iron-reduction system instead.
Choosing filtration according to your incoming water quality helps ensure that you select the appropriate treatment for your property.
Improve the taste and odour of your household water with the Aquafilter 20" Big Blue 3-Stage Whole House Water Filter and Dechlorinator Kit.
Designed for installation on a property's incoming water supply, this three-stage filtration system combines sediment filtration and activated carbon treatment to help reduce chlorine and improve the sensory quality of water throughout your home.
Chlorine is commonly used to disinfect public water supplies, but its taste and smell can be noticeable at household taps. Activated carbon filtration can help reduce free chlorine, making this system a practical choice for households looking to improve the taste and odour of their water.
Featuring three large-format 20" x 4.5" cartridges and 1" plumbing connections, this Big Blue system is designed for compatible domestic whole-house water-treatment installations.
Key Features
Three-stage filtration: Combines sediment and carbon-based filtration.
Chlorine reduction: Activated carbon media helps reduce free chlorine.
Improved taste and odour: Helps address unpleasant chlorine-related tastes and smells.
Sediment filtration: Helps capture suspended particles such as sand, rust and silt.
Whole-house application: Designed to treat incoming water before distribution around the property.
Large-format cartridges: Uses three 20" x 4.5" Big Blue filter cartridges.
1" plumbing connections: Suitable for compatible plumbing installations.
Replaceable cartridges: Allows routine maintenance using compatible replacement filters.
How the Three Filtration Stages Work
Stage 1 – Sediment Filtration
The first stage helps capture suspended particles from the incoming water supply.
A suitable sediment cartridge can help reduce:
Sand
Rust particles
Silt
Dirt
Other suspended sediments
This initial filtration stage also helps protect the downstream carbon cartridges from excessive particulate loading.
Stage 2 – Activated Carbon Block Filtration
The second stage uses activated carbon block media to help reduce free chlorine and improve water taste and odour.
Carbon block filtration provides a treatment medium that brings water into contact with activated carbon. Its effectiveness depends on the cartridge specification, incoming water quality, contact time and operating flow rate.
Stage 3 – Granular Activated Carbon Filtration
The third stage can provide additional carbon-based treatment using granular activated carbon (GAC), where this cartridge is included in the supplied configuration.
Granular activated carbon is commonly used to adsorb free chlorine and certain substances that can affect water taste and odour.
Using carbon block and granular activated carbon together provides two different carbon filtration formats within the system.
Actual treatment performance depends on the specific cartridges installed and operating conditions.
What's Included?
The system is specified as a three-cartridge 20" Big Blue filtration configuration.
The matching GroAqua cartridge configuration identifies the following cartridge types:
1 x 5-micron sediment cartridge.
1 x PRISM Plus activated carbon block cartridge.
1 x granular activated carbon cartridge.
Please confirm the exact cartridge model numbers supplied with this particular kit before ordering. Different Big Blue replacement sets may use different cartridge models.
The filtration assembly should also be checked against the manufacturer's supplied accessories and installation components.
Suitable Applications
This system may be suitable for:
Domestic whole-house water filtration.
Properties supplied with chlorinated mains water.
Reducing chlorine-related taste and odour.
Improving the sensory quality of water used for drinking and cooking.
General sediment filtration.
Compatible light-commercial water-treatment installations.
Installing the system on a suitable incoming water supply allows treatment before water is distributed to kitchen taps, bathrooms, showers and other outlets.
Product Specifications
Brand: Aquafilter / GroAqua
System type: Three-stage whole-house water filter and dechlorinator
Housing size: 20" Big Blue
Cartridge configuration: 3 cartridges
Cartridge dimensions: 20" x 4.5"
Inlet/outlet connections: 1"
Maximum operating pressure: 6 bar
Listed maximum flow rate: 210 litres per minute
Published dimensions: 785 x 540 x 220 mm (H x W x L)
Specifications should be confirmed against the manufacturer's documentation for this exact product configuration.
The listed maximum flow rate should be verified for the complete assembled system with the supplied cartridges installed. Actual flow depends on cartridge resistance, incoming pressure, water quality and plumbing conditions.
Installation and Maintenance
Install the filtration assembly on a suitable incoming water supply using compatible 1" plumbing connections.
Allow sufficient clearance around the housings for servicing and cartridge replacement.
For reliable ongoing operation:
Check connections and housings regularly for leaks.
Monitor pressure where gauges are fitted.
Replace cartridges in accordance with manufacturer recommendations.
Consider incoming water quality and household consumption when planning maintenance.
Check chlorine reduction performance if a particular treatment level is required.
Cartridge lifespan depends on chlorine concentration, sediment loading, water consumption and operating conditions.
Important Filtration Information
This system combines sediment filtration and carbon-based treatment to help improve water taste and odour and reduce free chlorine.
Carbon filtration performance depends on the type of cartridge, water chemistry, contact time and flow rate.
This is not a universal water purification or disinfection system. It should not be assumed to remove bacteria, viruses or every dissolved contaminant, or to make microbiologically unsafe water safe to drink.
For applications requiring specific contaminant reduction, choose cartridges with appropriate independently verified performance data.
Explore Other Big Blue Water Treatment Systems
If chlorine taste and odour are your main concerns, this three-stage dechlorinator kit is designed for that application.
If your water has iron-related staining, consider a dedicated iron-reduction system. If hardness and limescale are your main problems, explore a suitable cartridge-based water-softening system.
Choosing filtration according to your incoming water quality helps ensure that you select the appropriate treatment for your property.
Improved Water Quality
Aquafilter brings you a set of 3 replacement filters for your whole house water purifier softener. These filters are specifically designed to reduce chlorine and other impurities, providing you with cleaner and healthier drinking water. Say goodbye to foul tastes and odors, and enjoy the benefits of fresh and purified water every day.
Chlorine Reduction
One of the key features of these replacement filters is their ability to effectively reduce chlorine levels in your water. Chlorine is commonly used as a disinfectant in municipal water supplies but can leave your water with a strong chemical taste and smell. With Aquafilter's filters, you can enjoy chlorine-free water that is safe for drinking, cooking, and bathing.
Water Softening
In addition to reducing chlorine, Aquafilter's replacement filters also work to soften your water. Hard water can leave behind mineral deposits on your appliances, dishes, and plumbing fixtures. By incorporating a water softening filter into your system, you can prevent these issues and prolong the life of your household items. Invest in Aquafilter's replacement filters and experience the difference in your water quality today.
3 Stage 10" Water purifier and iron reducing filter kitKit contains:
3 Stage 10" water filter housing
Housing wrench
1 x FCPS5 sediment cartridge
2 x FCCFE iron reducing
Dimensions (H x W x L): 390 x 140 x 360 (mm)Minimum Temp.: 2°CMaximum Temp.: 45°CMaximum Flow: 33 lpmWorking Pressure: 6 bar
OxyGuard temperature probes are robust, accurate and easy to use. They are filled with a special compound that protects against moisture. As standard the probes are fitted with 7 m cable, but they can be supplied with other lengths on request. The sensor in both types of probe consists of a stainless steel cylinder containing the thermistor or Pt100 element. This sensor tip is fitted to a black plastic housing. Standard types of housing are shown overleaf, but others can be supplied on request, e.g. to fit other pipe threads or fittings.
The Milwaukee MI56P is a genuine replacement pH and temperature electrode designed for the Milwaukee pH55 PRO and pH56 PRO waterproof testers.
If the original electrode on your Milwaukee tester has become slow to respond, produces unstable readings or has reached the end of its working life, replacing the probe can restore the instrument's measurement performance without needing to purchase a completely new tester.
The MI56P combines pH and temperature-sensing functions in one replaceable electrode. When connected to a compatible Milwaukee tester, it supports automatic temperature compensation for reliable pH measurements.
It is a practical replacement for aquarium keepers, aquaculture professionals and water-quality users who rely on their Milwaukee pH55 or pH56 for regular testing.
Key Features
Genuine Milwaukee replacement electrode – designed for the pH55 PRO and pH56 PRO testers.
pH and temperature measurement – combination electrode with integrated temperature-sensing capability.
Replaceable design – extends the useful life of your existing Milwaukee tester.
Easy installation – slides into the tester fitting and secures with a screw-on connection.
Double-junction pH electrode – designed for dependable pH measurement and reduced maintenance.
Automatic temperature compensation support – works with the compatible tester's temperature-compensation function.
Suitable for aquarium testing – ideal for routine pH monitoring in freshwater and marine aquarium applications.
Aquaculture applications – suitable for maintaining pH measurement capability in fish-farming and aquatic systems.
Why Replace Your pH Electrode?
pH electrodes naturally deteriorate with use and age. Over time, you may notice:
Slower response when measuring pH.
Unstable or fluctuating readings.
Difficulty calibrating the tester.
Reduced measurement reliability.
Physical damage or deterioration of the sensing element.
Replacing the electrode with a compatible MI56P can help restore the performance of your Milwaukee pH55 or pH56 tester.
Designed for Aquarium pH Monitoring
Maintaining stable pH is an important part of aquarium management. Different fish, invertebrates and aquatic plants have different pH requirements, making regular measurement useful for monitoring water conditions.
The MI56P allows existing Milwaukee pH55 and pH56 owners to continue monitoring:
Freshwater aquarium pH.
Marine aquarium water pH.
Reef aquarium water as part of a wider testing routine.
Aquaculture water conditions.
Water used for aquarium water changes.
pH changes during aquarium maintenance and water treatment.
The probe measures pH and temperature. It does not measure other aquarium parameters such as ammonia, nitrite, nitrate, alkalinity or salinity.
Compatible Milwaukee Testers
The Milwaukee MI56P is designed for:
Milwaukee pH55 PRO – waterproof pH and temperature tester with 0.1 pH resolution.
Milwaukee pH56 PRO – waterproof pH and temperature tester with 0.01 pH resolution.
The probe is not a standalone instrument. A compatible Milwaukee tester is required to display measurements.
Easy Replacement
The MI56P features a replaceable design that allows the electrode to be changed without replacing the complete tester.
Installation involves removing the existing electrode and fitting the replacement into the tester's connection. The probe slides into the fitting and is secured by screwing the retaining section into the meter body.
Follow Milwaukee's instructions when replacing the electrode and take care not to damage the connector or sealing components.
Electrode Care and Maintenance
Correct maintenance helps maximise electrode life and maintain reliable readings.
For best results:
Rinse the probe with clean water after use.
Keep the pH sensing element hydrated during storage.
Store the electrode using Milwaukee MA9015 storage solution.
Never store the pH electrode in distilled or deionised water.
Clean the electrode periodically using suitable pH electrode cleaning solution.
Recalibrate the tester after replacing the electrode.
Use fresh calibration solutions for accurate calibration.
Recommended maintenance products:
Milwaukee MA9015 – pH electrode storage solution.
Milwaukee MA9016 – pH electrode cleaning solution.
Milwaukee M10007B – pH 7.01 calibration solution.
Milwaukee M10004B – pH 4.01 calibration solution.
Technical Specifications
Specification
Details
Model
Milwaukee MI56P
Product type
Replacement pH and temperature electrode
Compatible testers
Milwaukee pH55 PRO and pH56 PRO
Measurement
pH and temperature sensing
Electrode type
Gel-filled, double-junction pH electrode
Temperature compensation
Supports automatic temperature compensation on compatible testers
Replacement design
Removable, screw-in electrode
Installation
Slides into tester fitting and screws into meter body
Important Compatibility Information
The MI56P is specifically designed for the Milwaukee pH55 PRO and pH56 PRO.
It is not a universal replacement pH electrode and should not be purchased for other Milwaukee testers without checking compatibility first.
Keep your Milwaukee aquarium pH tester performing reliably with the genuine MI56P replacement electrode. Replace a deteriorated probe rather than the entire instrument and continue monitoring aquarium and aquaculture water conditions.
The Milwaukee EC60 PRO is a professional waterproof pocket meter designed to measure electrical conductivity (EC), total dissolved solids (TDS) and temperature in water. With a wide conductivity measurement range, automatic temperature compensation and a replaceable probe, it provides a convenient way to monitor changes in dissolved mineral content.
For aquarium keepers, the EC60 PRO can be used to compare source water, reverse osmosis (RO) water and prepared aquarium water, as well as monitor conductivity changes in freshwater systems. It is also suitable for hydroponics, nutrient solutions and other applications where conductivity measurements are important.
Three measurements in one waterproof meter
The EC60 PRO measures:
Electrical conductivity (EC): 0.00–20.00 mS/cm
Total dissolved solids (TDS): 0.00–10.00 ppt
Temperature: 0.0–60.0°C
The dual-level display shows the selected EC or TDS reading alongside the water temperature.
Electrical conductivity indicates how readily water conducts electricity, which is influenced by the concentration of dissolved ions. It is a useful way to monitor changes in mineral content, although it does not identify individual minerals or contaminants.
Useful for aquarium water monitoring
Conductivity is a useful supporting measurement for aquarium water preparation and maintenance.
The Milwaukee EC60 PRO can help you:
Compare conductivity in tap water, RO water and prepared aquarium water.
Monitor changes in dissolved mineral content.
Check consistency when preparing water for aquarium water changes.
Track conductivity changes in freshwater aquariums.
Monitor water temperature alongside conductivity or TDS.
Important: The EC60 PRO is not a dedicated marine aquarium salinity meter. Its maximum conductivity range is 20.00 mS/cm, which is below the conductivity of typical full-strength seawater. For routine marine aquarium salinity measurement, choose an instrument specifically designed for that application.
Automatic temperature compensation
Conductivity readings are affected by temperature. The EC60 PRO includes automatic temperature compensation (ATC), helping compensate for temperature-related changes during measurement.
Its temperature compensation coefficient is adjustable from 0.0 to 2.4% per °C, providing flexibility for different measurement conditions.
Temperature is displayed simultaneously with the EC or TDS reading, making it easier to monitor both measurements together.
Replaceable measuring probe
The EC60 PRO features a replaceable EC/TDS probe, helping extend the useful life of the meter without replacing the complete instrument.
The compatible replacement electrode is the Milwaukee MI59P, designed for both the EC59 PRO and EC60 PRO.
The probe can be replaced by unscrewing the retaining ring and fitting a new electrode.
For reliable measurements, rinse the probe with clean water after use and follow the manufacturer's maintenance recommendations.
Waterproof, practical design
Designed for use around water, the EC60 PRO features an IP65-rated waterproof housing and a floating casing.
Additional features include:
Automatic one-point calibration.
Automatic temperature compensation.
Adjustable temperature compensation coefficient.
Dual-level LCD display.
Measurement stability indicator.
Battery level indicator.
Hold function.
Automatic shut-off after approximately eight minutes of inactivity.
Temperature display in °C or °F.
Replaceable measuring probe.
Technical specifications
Specification
EC60 PRO
EC range
0.00–20.00 mS/cm
EC resolution
0.01 mS/cm
EC accuracy
±2% of full scale
TDS range
0.00–10.00 ppt
TDS resolution
0.01 ppt
TDS accuracy
±2% of full scale
Temperature range
0.0–60.0°C / 32.0–140.0°F
Temperature resolution
0.1°C / 0.1°F
Temperature accuracy
±0.5°C / ±1°F
Calibration
Automatic, one point
Calibration standard
12.88 mS/cm
Temperature compensation
Automatic, adjustable β = 0.0–2.4%/°C
Replaceable probe
Milwaukee MI59P
Operating environment
0–50°C
Waterproof rating
IP65
Batteries
4 × 1.5V LR44 / A76 alkaline
Battery life
Approximately 100 hours
Auto shut-off
After approximately 8 minutes
Understanding EC and TDS measurements
EC measures the electrical conductivity of water and is expressed in µS/cm or mS/cm.
TDS is an estimated value derived from conductivity using a conversion factor. Different conversion scales, such as 0.5 and 0.7, can produce different TDS readings from the same water sample.
For this reason, TDS readings from different meters may not be directly comparable unless the same conversion scale is being used.
For consistent aquarium monitoring, EC is often the more useful measurement to record and compare.
Supplied with
Milwaukee EC60 PRO meter.
Replaceable EC/TDS probe.
Protective cap.
12.88 mS/cm calibration solution sachet.
Four batteries.
Instructions.
Recommended accessories
Milwaukee MI59P replacement probe – replacement EC/TDS electrode compatible with the EC59 PRO and EC60 PRO.
Milwaukee MA9060 calibration solution – 12.88 mS/cm conductivity calibration solution in a 230 ml bottle.
Milwaukee M10030B calibration sachets – 12.88 mS/cm calibration solution in convenient individual sachets.
Milwaukee MA9016 cleaning solution – helps maintain the measuring probe.
The Milwaukee EC60 PRO is a versatile choice for users who need a waterproof conductivity and TDS tester with a wider measurement range, replaceable probe and simultaneous temperature display.
The Milwaukee MA73600 is a genuine replacement pH electrode designed for the Milwaukee pH51 and pH54 waterproof pH testers.
Over time, pH electrodes can deteriorate through normal use, contamination, drying out or inadequate maintenance. Replacing a worn or damaged electrode helps keep your compatible Milwaukee tester in service and supports reliable pH measurement.
For aquarium keepers, water-quality professionals and other users who regularly monitor pH, the MA73600 provides a practical replacement for the original measuring electrode.
Compatible with Milwaukee pH51 and pH54
The MA73600 is designed for use with:
Milwaukee pH51 waterproof pH tester.
Milwaukee pH54 waterproof pH tester.
It is a replacement electrode for these specific instruments. Please check your meter model before ordering to ensure compatibility.
Suitable for aquarium pH monitoring
Maintaining a reliable pH tester is important when monitoring aquarium water quality.
The MA73600 replacement electrode helps keep a compatible Milwaukee tester operational for routine pH checks, including:
Freshwater aquarium monitoring.
Checking pH in prepared aquarium water.
Monitoring pH changes during routine maintenance.
Testing water used for fishkeeping and aquatic systems.
The electrode measures pH when connected to a compatible meter. It does not independently display or process pH readings.
Why replace a pH electrode?
A pH electrode is a consumable measuring component. Its performance can gradually decline, particularly if it is allowed to dry out, becomes contaminated or is not maintained correctly.
Common reasons for replacement include:
Slow response when taking measurements.
Unstable or inconsistent readings.
An electrode that has become damaged.
Reduced performance despite correct cleaning and calibration.
An electrode that has reached the end of its useful service life.
Replacing the electrode can help restore the performance of a compatible tester, although the condition of the meter itself and correct calibration also affect measurement results.
Electrode care and maintenance
Correct storage and regular maintenance help extend the working life of a pH electrode.
For best results:
Keep the electrode hydrated using a suitable pH electrode storage solution.
Do not store the electrode in distilled or deionised water.
Rinse the electrode with suitable rinse solution or clean water between samples.
Use an appropriate electrode cleaning solution when contamination is suspected.
Calibrate the pH meter using fresh, suitable buffer solutions.
Follow Milwaukee's instructions for electrode replacement and conditioning.
Technical compatibility
Specification
Details
Product code
MA73600
Product type
Replacement pH electrode
Compatible instruments
Milwaukee pH51 and pH54
Measurement parameter
pH
Installation
Replacement electrode for compatible tester
Application
Water-quality and pH measurement
Recommended accessories
For reliable pH measurements and good electrode maintenance, consider:
Milwaukee MA9015 storage solution – helps keep the pH electrode properly hydrated during storage.
Milwaukee MA9016 cleaning solution – for cleaning the electrode when contamination affects performance.
Milwaukee M10004B pH 4.01 buffer solution – calibration buffer for acidic-range measurements.
Milwaukee M10007B pH 7.01 buffer solution – calibration buffer for neutral-range measurements.
Milwaukee M10010B pH 10.01 buffer solution – calibration buffer for alkaline-range measurements.
Milwaukee M10000B electrode rinse solution – for rinsing the electrode between measurements.
The Milwaukee MA73600 is the correct replacement electrode for users who want to maintain their existing Milwaukee pH51 or pH54 tester rather than replace the complete instrument.
The Milwaukee TH300 is a compact digital thermometer designed for accurate and convenient temperature measurement in water and other applications. Supplied with a stainless-steel probe connected to the meter by a flexible 1-metre cable, it makes checking temperatures in difficult-to-reach areas straightforward.
For aquarium keepers, the TH300 provides a convenient way to check aquarium water temperature, compare replacement water before water changes and monitor temperatures in different tanks.
With a wide measurement range of -50.0 to 150.0°C, a clear digital display and 0.1°C resolution, the TH300 is also suitable for brewing, winemaking, food preparation, educational experiments and general laboratory use.
Ideal for aquarium temperature checks
Temperature is an important water-quality parameter in aquarium keeping. Monitoring it helps ensure that aquarium water and replacement water are within the intended temperature range for the livestock being kept.
The Milwaukee TH300 can be used to:
Check the temperature of freshwater aquarium water.
Compare aquarium temperature with replacement water before a water change.
Check water temperature in breeding and quarantine tanks.
Monitor the temperature of prepared water.
Take measurements in containers and other hard-to-reach locations.
The 1-metre cable allows the stainless-steel probe to reach into a tank or sample while the digital display remains conveniently positioned outside.
Stainless-steel probe with 1-metre cable
The TH300 is supplied with a general-purpose stainless-steel temperature probe connected to the meter by a flexible 1-metre cable.
Simply place the probe in the sample being measured and allow the reading to stabilise.
The stainless-steel probe is durable, easy to clean and suitable for repeated temperature measurements in water and other samples.
Keep the meter housing and electrical connections dry. The TH300 is a portable thermometer, not a waterproof aquarium controller designed for permanent installation.
Wide temperature measurement range
The Milwaukee TH300 measures temperatures from -50.0 to 150.0°C, making it suitable for a wide range of applications.
Its 0.1°C resolution allows users to see temperature changes in small increments.
The specified accuracy is ±0.5°C between -20°C and 90°C.
Clear digital display and simple operation
The TH300 features a large LCD display designed to make temperature readings easy to see.
Its straightforward operation makes it suitable for aquarium keepers, laboratories, brewing applications and general-purpose temperature checks.
The meter is supplied with a battery and has an approximate battery life of one year under normal use.
Technical specifications
Specification
Milwaukee TH300
Measurement range
-50.0 to 150.0°C
Resolution
0.1°C
Accuracy
±0.5°C from -20 to 90°C
Typical EMC deviation
±0.3°C
Probe material
Stainless steel
Probe cable length
1 metre
Display
Digital LCD
Battery
1 × 1.5V AAA
Approximate battery life
1 year
Operating environment
0 to 50°C
Maximum relative humidity
95%
Calibration check
Not available
Power switch
No separate ON/OFF switch
Supplied with
Milwaukee TH300 digital thermometer.
Stainless-steel temperature probe.
1-metre probe cable.
Battery.
Instruction manual.
Suitable for more than aquarium use
Although particularly useful for aquarium temperature checks, the TH300 is a versatile general-purpose thermometer.
Other applications include:
Brewing and winemaking.
Food and beverage preparation.
Educational experiments.
Laboratory temperature checks.
General liquid temperature measurement.
The Milwaukee TH300 is a practical choice for aquarium keepers and other users who need a compact digital thermometer with a remote stainless-steel probe and a wide temperature measurement range.
Step up your water filtration system with the Pentair Pentek "Big Blue" Large Diameter Housing 10". Designed to accommodate high-capacity filtration needs, this housing supports larger cartridges, making it ideal for residential, commercial, and industrial applications. With its durable polypropylene construction and user-friendly features, it delivers consistent performance with minimal maintenance.
Key Features
Fits Larger-Diameter CartridgesDesigned for Ø 4 ½” cartridges, this housing provides increased filtration capacity, reducing the frequency of replacements.
Durable ConstructionMade of robust polypropylene, it resists wear and tear, ensuring durability even under demanding conditions.
Integrated Pressure Relief ButtonSimplifies maintenance by allowing pressure to be released before changing cartridges.
Versatile Port SizesAvailable with 3/4", 1", or 1 ½” BSP or NPT threaded ports for compatibility with various system configurations.
Certified for SafetyNSF/ANSI-certified to ensure material integrity and structural reliability for safe water filtration.
Benefits
Handles Higher Flow RatesPerfect for applications requiring high-capacity filtration, offering smooth water flow at up to 76 Lpm (depending on port size).
Reliable in Challenging EnvironmentsWithstands pressures of up to 6.9 bar (100 psi) and temperatures up to 37.8°C (100°F), ensuring consistent performance.
Ideal for Heavy-Duty FiltrationSuitable for large households, multi-unit buildings, and commercial or industrial spaces requiring scalable filtration solutions.
Enhanced User ConvenienceThe bleed valve on the inlet side minimizes messes and ensures a simpler, cleaner cartridge replacement process.
Standard Filter Housings are manufactured of a durable polypropylene or clear Styrene-Acrylonitrile (SAN). All are equipped with 3/4" NPT inlet and outlet ports. Standard Filter Housings are available in both 10" and 20" lengths and will accommodate a wide range of 2-1/2" to 2-7/8" diameter cartridges. The reinforced polypropylene cap offers an optional pressure relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges.Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps offer on-site examination of the cartridge.Opaque Standard Filter Housings are moulded from rugged reinforced polypropylene. They offer outstanding chemical compatibility and are ideal for use in a variety of low-flow applications.Clear Standard Filter Housings offer on-site examination of flow, performance, and cartridge life. They are ideal for a variety of applications.Features, Options, & Benefits
Ideal for a wide range of applications, including residential, commercial and industrial
Available in 10" and 20" lengths
Optional pressure relief/bleed button on inlet side of cap
Thick walls for increased strength
Leak-proof sealing with top-seated Buna-N O-ring
Available with clear or opaque sumps
Specifications
Housing - Polypropylene (opaque) or Styrene Acrylonitrile (clear)
Cap - Reinforced polypropylene
Button Assembly - 300-Series stainlesssteel, EPDM, and polypropylene
Temperature Rating - 4.4-51.7°C
Maximum Pressure - 125 psi (8.6 bar)
NSF CertificationsThe 150001, 150002, 150067, 150068, 150071, 150072, 150435 and 150436 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements.Part numbers: 150071, 150072, 150435, 150436, 150106, 150096
Utilising a traditional single layer manufacturing method, the PRISM range of bags offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications. PRISM polypropylene and polyethylene felt bags also benefit from an all welded seam construction, meaning they are capable of holding several kg's whilst maintaining filter integrity. Heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.
For industrial batch processes that value efficiency and flexibility, the PRISM FC-DBPC Core Carbon Block Filter delivers reliable water filtration. Designed for environments where extended service life isn’t a priority, this carbon block filter excels in removing organic contaminants like benzene. Built with acid-washed bituminous carbon, it ensures cleaner operation by targeting ash removal and reducing rinse-up fines commonly found with non-acid-washed carbon. Available in multiple micron sizes, this filter suits a variety of applications where sediment can impact performance.
Key Features
Specialized for Industrial Batch ProcessesIdeal for applications where longer filter life isn’t required but effective filtration is critical.
Acid-Washed Bituminous CarbonResults in a cleaner operation with fewer rinse-up fines and effective ash removal.
Microporous StructureTargets larger organic molecules such as benzene, ensuring clean, contaminant-free water.
Flexibility with Micron SizesChoose from 1, 5, and 10-micron ratings to suit different sediment removal needs.
Durable and Reliable DesignDouble open-ended caps (DOE) and EPDM seals improve strength and compatibility in diverse setups.
Why Choose the PRISM FC-DBPC Core Filter?
The PRISM FC-DBPC Core Carbon Block Filter is the ultimate solution for industrial workflows requiring versatile and cost-effective filtration. Its acid-washed carbon construction targets organic contaminants, while its multiple micron size options address challenges like sediment buildup. Reliable, adaptable, and efficient, this filter is built to meet the demands of batch processing environments with precision.
This 55W UV unit with full WRAS approval is ideal for family homes with more than 4 bedrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 75l/min or 4.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
Superior Chlorine Reduction
Upgrade your water filtration system with the Pentair/Pentek ChlorPlus 10 Carbon Block Water Filter. This 10-inch filter is designed to effectively reduce chlorine and chloramine in your water, providing you with cleaner and better-tasting water for your household.
Advanced Carbon Block Technology
The ChlorPlus 10 Water Filter utilizes advanced carbon block technology to remove impurities and contaminants from your water supply. By reducing chlorine and chloramine levels, this filter helps protect your appliances and plumbing fixtures while also enhancing the quality of your drinking water.
Easy Installation and Maintenance
With its compact 10-inch size, the Pentair/Pentek ChlorPlus 10 Water Filter is easy to install and maintain. Simply follow the manufacturer's instructions for proper installation and replacement, and enjoy the benefits of cleaner, fresher water throughout your home.
Pentek EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.Features & Benefits
High dirt-holding capacity maximizes utilization of the carbon block
Highly effective bad taste & odour and chlorine taste & odour reduction
Nominal 5-micron rating
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Outer Wrap – Polyolefin
Netting – Polyethylene
Gaskets – Buna-N
Temperature Rating – 40-180°F (4.4-82.2°C)
EPM Series cartridges are a modified version of our EP Series cartridge. An economical price makes this cartridge an attractive choice for taste, odour, and chlorine taste & odor reduction, as well as sediment filtration.EPM Series cartridges have a nominal 10-micron filtration rating, high porosity and chlorine taste & odour reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by an outer wrap designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.Features & Benefits
Nominal 10-micron rating
Enhanced dirt holding capacity for extended cartridge life
Lowest pressure drop
Bad taste & odour and chlorine taste & odour reduction
Economically priced
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Outer Wrap – Polyolefin
Netting – Polyethylene
Gaskets – Buna-N
Temperature Rating – 40-180°F (4.4-82.2°C)
The Spectrum SRIF OilOut-99 is an advanced solution designed for polishing trace hydrocarbons. With the capability to absorb up to three times its weight in hydrocarbons, it delivers powerful and cost-effective oil reduction. Perfect for applications like surface runoff water, CNC coolant treatment, and bilge waste management, this cartridge ensures clean and efficient hydrocarbon removal.
Key Benefits
Highly Absorbent DesignRetains up to 3x its own weight in hydrocarbons, reducing the need for frequent cartridge changes.
Efficient Hydrocarbon RemovalRemoves up to 99% of dispersed hydrocarbons, ensuring a cleaner and safer water output.
Durable and ReliableMaintains low-pressure drop even when saturated, providing consistent performance.
Versatile ApplicationsEffective for a range of contaminants, including mineral oils and BTEX hydrocarbons.
Cost-Effective SolutionProvides high flow oil reduction for various industrial and environmental needs.
Features
25-micron resin-impregnated felt media, dedicated to hydrocarbon absorption.
Constructed with durable polypropylene wrap, core, and end-cap for maximum stability.
Buna-N gaskets offer secure sealing to prevent leakage.
Suitable for use in double-pass systems or as a polishing phase.
Capable of handling inlet contamination levels below 500mg/L.
Rotary microscreen drum filters are ideal for the removal of fine suspended solids in recirculating systems where water reuse strategies are imperative—zoos, aquariums, greenhouses, aquaculture systems, wastewater treatment plants, and more. HydroTech drum screen filters are trusted by facilities worldwide for critical filtration needs. Constructed of the highest-quality materials and engineered for the rigors of commercial aquaculture, they provide exceptional reliability and a long service life. Designed with the needs of the commercial operator in mind, the filters are also inexpensive to operate.
We stock a wide range of filter screens for HydroTech Drum Filters.
The OxyGuard Polaris C MaxiTemp is a small electronic thermometer specially designed to meet the demands of fish farmers and other professional people for a rugged, reliable and accurate thermometer with data logging function. It has a measuring range of -5 to +45°C with an accuracy of +/- 0.1°, and will measure up to +60°C with an accuracy of +/- 0.2°C. The probe is manufactured in plastic and sea-water resistant stainless steel, and is connected to the display with a 1.5 m cable. Both probe and display are sealed and waterproof.
Values can be stored either automatically at preset time intervals, or manually. You can group values according to the place of measurement. Stored values can be transferred to a PC using the Polaris Link, which connects to the PC via a USB cable.
The SPECTRUM PPP Premier Series Pleated Cartridge combines precision engineering and durability to meet demanding filtration needs. With superior media and advanced design, it offers reliable performance across a variety of applications and industries.
Key Benefits
Maximized Filtration CapacityA media surface area of 0.6m² delivers higher flow rates and up to 50% greater dirt-holding capacity compared to standard industry alternatives.
Dependable Particle RemovalSharp cut-off characteristics ensure consistent and precise removal of required particle sizes, extending filter life and ensuring application integrity.
Safe and Non-Leaching DesignThe thermally-bonded construction eliminates adhesive leaching, maintaining purity for sensitive applications, such as food and beverage processing.
Chemical CompatibilityConstructed entirely of polypropylene, the cartridge is resistant to a wide range of chemicals, making it versatile and dependable for challenging processes.
Customizable and VersatileFDA-compliant media, with 11 micron ratings, 6 length options, and 9 end-cap configurations, ensures flexibility to suit diverse application needs.
Features at a Glance
Superior Surface Area: 0.6m² per 10" provides higher flow rates and dirt-holding capacity.
Exacting Micron Sizes: Available in 11 precise micron ratings.
Multiple Lengths and End Caps: Six standard lengths and nine end-cap options for flexible compatibility.
Chemical Resistant: Made with all-polypropylene construction for extensive chemical compatibility.
Thermal Bonding: Ensures no contamination from adhesives, vital for food-grade and sensitive uses.
High Efficiency: Achieves up to 99% efficiency for dependable performance.
Applications & Industries
The SPECTRUM PPP Premier Series Pleated Cartridge is ideal for numerous filtration applications, including:
General Water FiltrationSuitable for pre- or final-stage filtration in general water applications.
Beverage ProductionEnsures purification and clarification, meeting strict quality standards.
Hospital UseProvides secure seals and ensures cartridge integrity for critical applications.
Chemical FiltrationResistant to aggressive chemicals, making it perfect for chemical manufacturing and processing.
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - coefficient of performance and the lowest noise levels
Digital Thermostat
The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces.
Unique Features
Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi.
Power supply
Water temp
Liters
US Gallons
COP***
50Hz
25°C*
2000
530
2,49
50Hz
8°C**
300
105
1,70
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
350W
R290
47,2 lb
10°C - 38°C
ll data are approximate and may be changed without notice by TECO
Technical Details
Supply
230V-50Hz
Cooling Power Consumption
350 w
Ecological Refrigerant
R290
Min and Max Flow Rate
500 l/h - 800 l/h
Tank Size
up to 2000 l (water temp. 25°C - Room temp. 30°C - Heating load 0.3 w/l)
Dimensions (millimeters)
310 (w) x 310 (d) x 500 (h)
Dimensions (inches)
12.2 (w) x 12.2 (d) x 19.69 (h)
Weight
21.4 kg
Connections
fitting 3/4" - 16mm int. tube diameter
The exclusive use of high-quality and internationally accepted and of the titanium heat exchanger, ensures high performance and low energy consumption. The set of technologies used allow you to achieve the highest COP - Coefficient Of Performance and the lowest noise levels
Digital Thermostat
The setting of functions is intuitive and the temperature reading is accurate, resolution 0.1°C/1°F. The setting range is 5°C - 30°C (41°F - 86°F) and the temperature is kept constant with a maximum differential of 0.5°C/0.5°F. Displayed temperature is in °C or °F and there are security alarms.
Efficient Design
The chiller, with its innovative design, is characterized by a solid structure designed to guarantee a perfect protection against rust. The user will appreciate the functionality of the shape and the compact size also adaptable to confined spaces.
Unique Features
Innovative TECOair system: a system that, thanks to the conveyor rotation, assure to the chiller an optimal air exchange and heat expulsion from the cabinet; Magnetic filter for quick maintenance; R290 environmentally friendly gas that reduce power consumption with increased performance and COP; Designed for TECOnnect Wi-Fi.
Power supply
Water temp
Liters
US Gallons
COP***
50Hz
25°C*
500
130
1,83
50Hz
8°C**
100
250
1,09
* The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.3 w/lt. ** The values reported in the table refer to the following conditions: room temp. 30°C, heating load of 0.1 w/lt. *** Coefficient of performance.
Power Supply
Power Consumption
Gas
Weight
Ambient temperature
50Hz
240W
R290
36,4 lb
10°C - 38°C
ll data are approximate and may be changed without notice by TECO
Technical Details
Supply
230V-50Hz
Cooling Power Consumption
240 w
Ecological Refrigerant
R290
Min and Max Flow Rate
500 l/h - 800 l/h
Tank Size
up to 500 l (water temp. 25°C - Room temp. 30°C - Heating load 0.5 w/l)
Dimensions (millimeters)
310 (w) x 310 (d) x 416 (h)
Dimensions (inches)
12.2 (w) x 12.2 (d) x 16.38 (h)
Weight
16.5 kg
Connections
fitting 3/4" - 16mm int. tube diameter
Effective Sediment Removal
Keep your water clean and free of sediment with the 10pk Ecosoft CPN251010ECO 10 micron polypropylene yarn cartridges. Designed to effectively remove sediments and particles as small as 10 microns, these cartridges ensure that your water is clear and safe to use for drinking, cooking, and other household purposes.
High-Quality Water Filtration
Upgrade your water filter system with these high-quality cartridges from Ecosoft. Made with durable polypropylene yarn, these cartridges are designed to provide long-lasting filtration performance, ensuring that your water remains clean and pure. Say goodbye to murky water and enjoy crystal-clear H2O with the Ecosoft CPN251010ECO cartridges.
Convenient 10-Pack
This convenient 10-pack of Ecosoft CPN251010ECO cartridges makes it easy to keep your water filter system running smoothly. Simply replace the old cartridge with a new one whenever needed to maintain optimal filtration performance. With 10 cartridges included in each pack, you'll have more than enough to last you for an extended period of time.
