Filtration applications are typically defined by the performance characteristics of the filter cartridge being used, however selecting the right filter housing can optimize and enhance the results achieved from different cartridges. Several factors are important to consider when selecting housings such as system operating pressure, flow rate and pipework requirements, application temperature, chemical compatibility and the housing location/environment.
Filter Housings
-
Pentair Pentair 10" Blue Housing 1" MB Without Pressure Release 1501031
Standard Filter Housings are manufactured of a durable polypropylene or clear Styrene-Acrylonitrile (SAN). All are equipped with 3/4" NPT inlet and outlet ports. Standard Filter Housings are available in both 10" and 20" lengths and will accommodate a wide range of 2-1/2" to 2-7/8" diameter cartridges. The reinforced polypropylene cap offers an optional pressure relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges.Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps offer on-site examination of the cartridge.Opaque Standard Filter Housings are moulded from rugged reinforced polypropylene. They offer outstanding chemical compatibility and are ideal for use in a variety of low-flow applications.Clear Standard Filter Housings offer on-site examination of flow, performance, and cartridge life. They are ideal for a variety of applications.Features, Options, & Benefits Ideal for a wide range of applications, including residential, commercial and industrial Available in 10" and 20" lengths Optional pressure relief/bleed button on inlet side of cap Thick walls for increased strength Leak-proof sealing with top-seated Buna-N O-ring Available with clear or opaque sumps Specifications Housing - Polypropylene (opaque) or Styrene Acrylonitrile (clear) Cap - Reinforced polypropylene Button Assembly - 300-Series stainlesssteel, EPDM, and polypropylene Temperature Rating - 4.4-51.7°C Maximum Pressure - 125 psi (8.6 bar) NSF CertificationsThe 150001, 150002, 150067, 150068, 150071, 150072, 150435 and 150436 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements.
£92.57
-
Pentair PENTAIR 10" Blue Housing 3/4" VIH with Pressure Release
Standard Filter Housings are manufactured of a durable polypropylene or clear Styrene-Acrylonitrile (SAN). All are equipped with 3/4" NPT inlet and outlet ports. Standard Filter Housings are available in both 10" and 20" lengths and will accommodate a wide range of 2-1/2" to 2-7/8" diameter cartridges. The reinforced polypropylene cap offers an optional pressure relief button on the inlet side to relieve pressure inside the housing when changing filter cartridges.Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications. Clear sumps offer on-site examination of the cartridge.Opaque Standard Filter Housings are moulded from rugged reinforced polypropylene. They offer outstanding chemical compatibility and are ideal for use in a variety of low-flow applications.Clear Standard Filter Housings offer on-site examination of flow, performance, and cartridge life. They are ideal for a variety of applications.Features, Options, & Benefits Ideal for a wide range of applications, including residential, commercial and industrial Available in 10" and 20" lengths Optional pressure relief/bleed button on inlet side of cap Thick walls for increased strength Leak-proof sealing with top-seated Buna-N O-ring Available with clear or opaque sumps Specifications Housing - Polypropylene (opaque) or Styrene Acrylonitrile (clear) Cap - Reinforced polypropylene Button Assembly - 300-Series stainlesssteel, EPDM, and polypropylene Temperature Rating - 4.4-51.7°C Maximum Pressure - 125 psi (8.6 bar) NSF CertificationsThe 150001, 150002, 150067, 150068, 150071, 150072, 150435 and 150436 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity requirements.
£77.15
-
Spectrum SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 226 Configuration, 30"
SPECTRUM Inox single round housings were specifically designed in a heavy duty construction to perform in the harshest of application environments with high temperatures, high pressures and challenging liquids. Offering solutions beyond plastic housings, these high grade 316L stainless steel housings suite applications from nominal particulate removal to critical absolute filtration when selecting the appropriate end-capped cartridges.When an application requires an absolute seal, the Premier filter housing (PFH) is the go-to choice in this range of single-round housings. With an electropolished finish and with options to accept either 222 double O-ring fittings or the 226 fitting with locking tabs for additional security, these housings are designed to perform under high pressure and temperatures whilst fulfilling the needs of sub-micron or critical applications.Maximum Pressure: 21 barMaximum Temperature: 93°CFeatures & Information 316L electropolished stainless steel enables more compatibility in critical applications. The threaded ring-nut closure connects the housing body and head and is secured using the closure tool. PFH housings come in either 222 or 226 cartridge connector options wither either Fin or Flat ends for wider application capabilities. Drain plug is fitted with PTFE tape. Housings include: mounting bracket kit with two screws and spring washers. Features & Information Commercial filtration High Temperature installations High Pressure applications Industrial applications
£784.00
-
Spectrum SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 226 Configuration, 10"
SPECTRUM Inox single round housings were specifically designed in a heavy duty construction to perform in the harshest of application environments with high temperatures, high pressures and challenging liquids. Offering solutions beyond plastic housings, these high grade 316L stainless steel housings suite applications from nominal particulate removal to critical absolute filtration when selecting the appropriate end-capped cartridges.When an application requires an absolute seal, the Premier filter housing (PFH) is the go-to choice in this range of single-round housings. With an electropolished finish and with options to accept either 222 double O-ring fittings or the 226 fitting with locking tabs for additional security, these housings are designed to perform under high pressure and temperatures whilst fulfilling the needs of sub-micron or critical applications.Maximum Pressure: 21 barMaximum Temperature: 93°CFeatures & Information 316L electropolished stainless steel enables more compatibility in critical applications. The threaded ring-nut closure connects the housing body and head and is secured using the closure tool. PFH housings come in either 222 or 226 cartridge connector options wither either Fin or Flat ends for wider application capabilities. Drain plug is fitted with PTFE tape. Housings include: mounting bracket kit with two screws and spring washers. Features & Information Commercial filtration High Temperature installations High Pressure applications Industrial applications
£560.00
-
Spectrum SPECTRUM INOX Premier Filter Housing 1 X 20" 1" Ports & 222 Cup CSF
SPECTRUM Inox stainless steel filter housings are designed for the toughest liquid environments involving filtration. The full range of Economic, Standard and Premier are all manufactured from 316L stainless steel. Aggressive chemicals, high temperatures, high pressures and cleanrooms where purity is important are all environments these housings are designed for. The differences between the ranges are designed to cover the diverse circumstances involving aggressive environments in applications. Industrial applications often benefit from using the Economic range as simple double-open-ended (DOE) filter cartridges are accepted and the housing can be placed inline on the pipework or mounted using the bracket provided. This range, rated at 17.2 bar is the lowest priced and comes complete with tie-rod and gasket on the top-nut closure for a secure seal plus an 1/8” drain to reduce liquid spillage during the filter change. Applications where the top-nut arrangement does not suit or higher pressures to 21 bar are required, benefit from the use of the Standard housing range which includes a 1/4” drain and uses a ring closure arrangement and closure tool to secure the housing sump to the head after the filter change. The tie-rod is not present in the Standard range, replaced by a spring in the base for a tight seal which means this range can be used for longitudinal as well as radial cartridges. Critical applications where secure fittings, sub-micron filtration or cartridge fitting compatibility are required, have the solution in the Premier range of housings which offer options of 222 or 226 fitting cups as well as all the benefits of the Standard range, as above.
£1,061.99
-
Spectrum SPECTRUM Inox Premier (PFH) Stainless Steel Housing, 222 Configuration, 10"
SPECTRUM Inox stainless steel filter housings are designed for the toughest liquid environments involving filtration. The full range of Economic, Standard and Premier are all manufactured from 316L stainless steel. Aggressive chemicals, high temperatures, high pressures and cleanrooms where purity is important are all environments these housings are designed for. The differences between the ranges are designed to cover the diverse circumstances involving aggressive environments in applications. Industrial applications often benefit from using the Economic range as simple double-open-ended (DOE) filter cartridges are accepted and the housing can be placed inline on the pipework or mounted using the bracket provided. This range, rated at 17.2 bar is the lowest priced and comes complete with tie-rod and gasket on the top-nut closure for a secure seal plus an 1/8” drain to reduce liquid spillage during the filter change. Applications where the top-nut arrangement does not suit or higher pressures to 21 bar are required, benefit from the use of the Standard housing range which includes a 1/4” drain and uses a ring closure arrangement and closure tool to secure the housing sump to the head after the filter change. The tie-rod is not present in the Standard range, replaced by a spring in the base for a tight seal which means this range can be used for longitudinal as well as radial cartridges. Critical applications where secure fittings, sub-micron filtration or cartridge fitting compatibility are required, have the solution in the Premier range of housings which offer options of 222 or 226 fitting cups as well as all the benefits of the Standard range, as above.
£560.00
-
Spectrum Spectrum Inox Economic (EFH) Housing, 30", 1" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£783.99
-
Spectrum Spectrum Inox Economic (EFH) Housing, 20", 1" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£392.00
-
Spectrum Spectrum Inox Economic (EFH) Housing, 20", 3/4" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£747.19
-
Spectrum Spectrum Inox Economic (EFH) Housing, 20", 1/2" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£392.00
-
Spectrum Spectrum Inox Economic (EFH) Housing, 10", 1" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£280.00
-
Spectrum Spectrum Inox Economic (EFH) Housing, 10", 3/4" Ports
The Inox Economic Filter Housing (EFH) is an entry level housing into the heavy-duty industrial and commercial stainless steel housings range.Equipped with .1/2", 3/4" and 1" BSP ports in all 316L stainless steel construction. For lower flow applications where space is limited, a 4." is available. Housings accept DOE cartridges with radial flow and secure with a tie rod through the centre of the head, tightening by head nut. Cartridge changeout is made easy with a base drain to reduce spillage and the housing requiring just 60mm ground clearance.Maximum Temperature: 135°CMaximum Pressure: 17.2 barCertifications: DWI Regulation 31, PED97/23/ECFeatures & Information Manufactured from quality corrosion resistant 316L stainless steel PED compliant and DWI approved Single top nut releases the housing, offering quick and simple cartridge change outs Accepts DOE with radial flow 1/8" drain allows for easy drainage with minimal ground clearance Easily outperform any comparable polypropylene housing. Features & Information•Commercial filtration•Industrial filtration•High Temperature installations•High Pressure applicationsNotes:1) 10" housing accepts 93/4" and 10" cartridge.2) Standard seal is Buna-N.
£280.00
