ACC-4 Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. ACC-4 series Aquafilter carbon Block filter cartridge for VOC reduction is manufactured by extrusion, using mix blend GAC granular activated carbon media for improved reduction of chlorine taste and odour, and high adsorptive capacity. The 5-micron carbon block and is ideal for use as a reverse osmosis prefilter or postfilter.
Aquafilter offers FCCBL cartridges (FCCBL5, FCCBL, FCCBL10BB, FCCBL-L, FCCBL20BB) suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its block activated carbon media, FCCBL cartridges improve the bad taste and odour of your drinking water. By reducing the concentration of chlorine and organic compounds (VOC’s), FCCBL series enhances the continuous supply of fresh and clean drinking water.
Aquafilter FCCBL10BB-S 10" Big Blue Carbon block cartridge suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its accurate combination of mixed granular activated carbon (GAC) media, FCCBL10BB-S series improves the bad taste and odor of your drinking water by reducing the concentration of chlorine and organic compounds (VOC’s). Additionally, the cation exchange-based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean drinking water.Specification
Media: bituminous activated carbon and NSF approved coconut shell activated carbon, zeolite
Filter Life: 6 - 12 months or 123000 liters
Size : 10" x 4 1/2"
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 80°C
Contaminant Removal: Chlorine, VOC's, heavy metals, reduces water hardness
End caps: PP
Gasket: Silicone
Neting: LDPE
Aquafilter FCCBL20BB-S 20" Big Blue Carbon block cartridge suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its accurate combination of mixed granular activated carbon (GAC) media, FCCBL20BB-S series improves the bad taste and odour of your drinking water by reducing the concentration of chlorine and organic compounds (VOC’s). Additionally, the cation exchange-based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean drinking water.Specification:
Media: bituminous activated carbon and NSF approved coconut shell activated carbon, zeolite
Filter Life: 6 - 12 months or 257000 litres
Size : 20" x 4 1/2"
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 80°C
Contaminant Removal: Chlorine, VOC's, heavy metals, reduces water hardness
End caps: PP
Gasket: Silicone
Netting: LDPE
Pentair Quick Change are designed for easy installation and filter change.
The cartridge filter is easily changed with a quarter-turn of the filter. Water is automatically shut off during the change of the filter through the auto shut-off feature built into the filter head. This feature eliminates the need for additional shut-off valves to and from the filter system.
Easy to install, easy filter change
Filter life 500 gallons (1890 L)
Flow rate 0.50 gpm (1.9 L/min)
0.5 Micron rating
PENTEK's quick-change filter system applications include:
under-sink drinking water
refrigerator/icemaker
pre/post RO membrane
vending machine
ice machine
coffee machine
other OEM applications
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.Key Product Features
0.5 micron nominal that flows like a 10 micron
99.95% reduction of Cryptosporidium and Giardia cysts
NSF/ANSI certified range of filters
Lasts up to 6 times longer than traditional cyst filters
Premium dirt-holding capacity
High chlorine taste & odour and bad taste & odour reduction
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Netting – Polyethylene
Gaskets – Santoprene
Temperature Rating - 40-180°F (4.4-82.2°C)
CFBC-10, CFBC-20
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
Aquafilter FCPS5-AB / FCPS20-AB Melt-blown antimicrobial/antibacterial polypropylene filter cartridge. These durable melt-blown water filter cartridges are the only cartridges available treated with Antimicrobial/Antibacterial nanosilver BACINIX technology. This technology is new to the water filter industry and Aquafilter is the only firm offering this advanced technology within a wide range of product lines. Antimicrobial/Antibacterial technology has been used in the medical industry and is branching out into water treatment industries. This technology helps destroy bacteria as well as inhibit the growth of mold. The blue color of the filter indicates that it has been treated for additional safety. The Aquafilter range of melt-blown cartridges have multiple fibre zones. These multi-fiber zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fiber zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.
he construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. ACS-1 series uses no resin binders, lubricants, antistatic or release agents or other chemical additives.The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
In-line sediment filter cartridge, which removes sediments such as sand, silt, rust and suspended solids. Available with 1/4" NPT connection. Available sizes: 2,5" x 12"Available micron rating: 5
Multi-use washable sediment filter cartridge, manufactured from durable polyester fabric. In order to provide increased surface area and longer life, ACS-3 series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
Sediment filter cartridge Aquafilter offers FCCEL cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polyester filter media, FCCEL series removes solids in suspension, protecting your water stream and enhancing a continuous supply of fresh and clean drinking water.
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.Key Product Features
Outstanding sediment reduction ensures less plugging, meaning the CFB-Plus achieves its full chlorine reduction capacity
100% more chlorine, taste and odour reduction than original carbon blocks
Unique post filtration layer, fused to carbon/fibre media prevents carbon fines being released into the effluent stream
Tested and certified by NSF International to ANSI/NSF Standard 42
Manufactured entirely from FDA compliant materials
Part Numbers: CFB-PLUS-10, CFB-PLUS-20, CFB-PLUS-30, CFB-PLUS-10BB, CFB-PLUS-20BB
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced..Features & Benefits
Reduces particles as small as 0.5 micron in size by mechanical means
NSF/ANSI Standard 53 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means
Premium dirt-holding capacity
Outstanding chlorine taste & odour reduction
True depth filtration
High flow rates and low pressure drop similar to a nominal 10-micron cartridge
Maximum life - dirt-holding ability of a 10-micron carbon block with the particulate efficiency of a 0.5-micron cartridge
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Netting – Polyethylene
Gaskets – Santoprene
Temperature Rating – 40-180°F (4.4-82.2°C)
