The Aquafilter 10" Filter Housing 1/2" series housings - 10"-type filter housings offer the versatility to meet all customer filtration needs. H10B Series consists of FHPRx-B-AQ, FHPRx-B1-AQ, FHPRNx, FHPRNx-B1-AQ Series. They are all dedicated for cold water on residential and commercial applications. H10B series housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. FHPRx-B-AQ, FHPRx-B1-AQ series filter housings
DescriptionConsisting of a transparent sump and head with brass 1/2", 3/4" and 1” inlet/outlet inserts and two O-rings (one placed around sump thread and the other inside filter head). A transparent sump allows for the evaluation of cartridge contamination. FHPRNx, FHPRNx-B1-AQ Series consists of blue sump, ring and head with brass 1/2", 3/4" and 1” inlet/outlet inserts and two O-rings (one placed around sump thread and the other inside filter head). Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure). Utilisation of two O-rings ensures maximum leak-proof performance. Optionally, filter housings can be equipped with additional features, such as: mounting bracket, wrench or filter cartridge (for details refer to product brochure). The H10B Series housings can be mounted individually or connected in a series.
Technical SpecificationHigh quality NSF certified for structural integrity and material requirements WRAS certificate FDA CFR Title 21 Compliance Factory Tested Two O-rings for maximum leak proof protection Domestic and commercial use Equipped with filter bracket, wrench and cartridge* Equipped with antibacterial and antimicrobial filter centralizing ring* - Ideal for POE or POU use - Maintenance Free -Saves Money, Time and Labour - Easy to connect to cold water inlet - Easy to install, No Electricity, No Drain Required - Full flow 1/2”, 3/4" or 1” ports - Made in EU with High Performance Components
This complete 7 stage reverse osmosis system is ready to install made by Aquafilter. Made of NSF and WRAS certified components. Due to the high membrane quality it is possible to purify up to 280 litres of water per day. Small micron rating 0,0001 µm, allows to remove most contaminants from water including bacteria and viruses. System is equipped with post filtration carbon cartridge (AICRO), which improves the taste and aroma of water and AIMRO mineralising cartridge, which enriches water with elements such as calcium and magnesium.Set includes: RX-RO6-NN system, FCCA, FCCBL, FCPS20 sediment filter,(one extra sediment filter 5 micron), AICRO, AIMRO cartridges and TFC-75F-AQM RO membrane, FXFCH5 faucet, feed water connector 1/2″, tubing, tank, instruction, and accessories.If your water pressure is less than 2.8bar, we recommend you choose the pumped system.
Please find a link to the Instructions here. A QR Code linking to instructions is included in the box.
We recommend using a plumber or other suitable tradesperson for the installation of these systems.
UsesDrinking water for home and office Aquarium waterwindow cleaning
What we offer7 stage complete Ro filter system 75 GPD.(Stage 1) 20 Micron Sediment Filter: FCPS20 or FCPS5(Stage 2) Activated Carbon Block Filter: FCCBL(Stage 3) Carbon Block Filter: FCCA(Stage 4) Reverse Osmosis Membrane 75 GPD per day: TFC-75F-AQM(Stage 5) Post Carbon filter: AICRO(Stage 6) Mineral cartridge: AIMRO(Stage 7) Ionizing Cartr0dge: AIFIR2000.
FeaturesConnectors type: Quick connect fittings3.2 Gallons NSF Standards Water Storage Tank: PRO3200PNSF Approved 3 Filter Housings (double o’ring): 3 whiteMounting bracket: Plastic type Automatic Shut-off Valve:AJ-S-3000WFlow Restrictor: 420cc AQ-FR-420Attractive design faucet: FXFCH5Feed water connector and deliver valve: FT06P, AQ-SEWBV1414-PPDrain Saddle Valve:AJ-SC500B14White Colour Coded 1/4 inch Tubing for System ConnectionAssembled &100% Factory leak tested ready for Installation
Technical FeaturesMembrane: 75 GPD / 283 LPDOperation pressure: 2.75 – 5.5 bar (40 -80 psi)Tank Pressure: 8 psiDimensions: (cm) 37 (L) x 45(H) x 20 (W) – system (cm) 28 (L) x 28(W) x 35 (H)- tank
10” in-line set: filter housing, with pressure relief valve and transparent sump, mounting bracket with screws, wrench, cartridge, bacteriostatic filter centralizing ring, instruction, color box. Available with brass inserts: 1/2", 3/4" or 1" BSP. The design in combination with two O-rings (one inside filter head and second on the edge of filter sump), ensures maximum leak proof performance.FHPR12-B1-AQ - 1/2"FHPR34-B1-AQ - 3/4"FHPR1-B1-AQ - 1"
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out.Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
The Hailea - T25000 Pond Pumps are without doubt one the best value pumps on the market today.
These T25000 Pond Pumps represent great value for money they are also a low wattage pump and most of all ultra reliable.
The whole Hailea T range can either be used dry inline just like the Aquamax pumps , or submerged therefore making them totally at home most environments. They have the same 1.5 inch threaded inlet and outlet
The T - Pump also has a built in thermal overload safety device to protect the pump.
Hailea Pump range are now the best selling range of pumps on the market today
Specifications
Dimensions: 402 x 165 x 189mm
Power consumption: 620 Watts
Turnover rate: 25000ltrs/hr
Head: 9.5 mtr
Weight: 5.9 kg Approx
Voltage: 220-240v/50Hz
Cable Length: 10 Meters
Inlet - Outlet Size: 1 1/2", 2"
The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. ACS-1 series uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
Aquafilter offers FCPS cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polypropylene filter media, FCPS series removes solids in suspension in a wide range of micron rating, protecting your water stream and enhancing a continuous supply of fresh and clean drinking water.
The service kit for the ET30-120 series includes 2 diaphragms, 1 filter and 1 magnet.
The service kit for the ET150-200 includes 2 diaphragms, 1 filter and 8 valves.
We recommend your ET pump be serviced every 18 months.
10x Genuine Aquafilter 10" x 2.5” 1,5,10,20,50 Micron Sediment Removal Water Filter Cartridge FCPS5AQUAFILTER FCPS5 series cartridges are NSF certified using FDA approved polypropylene for material requirements.The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities.FCPSx uses no resin binders, lubricants, anti-static or release agents or other chemical additives.The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene micro-fibres into a complex filter matrix.Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.Polypropylene fibres are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential plumbing systems.FCPSx series cartridges are an ideal true depth filters and can be used for filtration of cold potable water.Aquafilter wide range of melt-blown cartridges has multiple fibre zones.These multi-fibre zones provide a graded pore structure throughout the filter's depth.Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter.The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure.Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs.The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs
Features:
NSF approved product with FDA CFR Title 21 Compliance
85% efficiency at stated nominal micron rating
Multi-layer construction gives true graded depth filtration, high dirt holding capacity and long service life
Constructed from 100% polypropylene without added binders, resins or adhesives
Provides consistently efficient filtration with low inlet pressure
Chemical resistant and prevents development of micro-organisms
Made in the EU with High Quality materials
Specifications:
Filter Media: PP
Min. Feed Water Temp. 2°C (35º F)
Max. Feed Water Temp. 60°C (176ºF)
Length: 10"
Outer Diameter: 2.5"
Avg. Efficiency: 90%
Maximum Flow: 30 lpm
Filter Life: 6 months*
10” two stage system with two blue filter heads with BSP brass inserts, and two transparent filter housing sumps, wrench and color box.Set includes: FHPRCLx-B-TWIN system, wrench, 2 bacteriostatic centering rings, instruction and color box.System is available with several connection types:FHPRCL12-B-TWIN - 1/2" BSP,FHPRCL34-B-TWIN - 3/4" BSP.
Green drive technology – energy efficient motors low power consumption. Specially formulated diaphragm material for extended life. Due to no wearing parts no reduction in performance. Robust and compact construction – weatherproofEasy to service with competitively priced spares kit. Suited to intermittent or continuous duty applications. Whisper quiet operation as low as 35dbET60 Pump:
Product Type: Oil Free Air
Maximum Flow: 60 Litres Per Minute @ 0.12 bar
Power Consumption: 55 Watts
Weight: 6.0 kgs
Dimensions: 203mm Long x 165mm Wide x 153mm High
Connector Size: 18mm
Accessories Included: Screw in brass connector, L shaped elbow & 2 hose clips
Supply Voltage: 220v - 240v 50Hz
10” three stage system with three blue filter heads with BSP brass inserts, and three transparent filter housing sumps, wrench and colour box. Set includes: 3 stage systemSystem is available with several connection types: FHPRCL12-B-TRIPLE - 1/2" BSP.FHPRCL34-B-TRIPLE - 3/4" BSP
Philips TUV 55W HO G55T8. Philips 55 watt ultraviolet lamp used in air and water disinfection systems. Common applications are Pond UV Filters and clarifiers, Residential Drinking Water Systems and Air Disinfection units. They are 99.9% effective against bacteria, viruses and other harmful pathogens. Philips ultraviolet lamps have the lowest percentage of lamps that fail prematurely in the market.
This lamp fits into the following Pond UV Filters :
Daro ECO-3
Daro ECO-5
Evolution Aqua Evo 55w UVC
Evolution Aqua Evo 110w UVC
Kockney Koi Yamitsu 55w UVC
TMC Pro Clear UV55
TMC Pro Pond UV55 and UV110
