The Milwaukee EC59 PRO Conductivity (EC) & Total Dissolved Solids (TDS) Tester is designed for aquaculture, food, wine, laboratory, water treament and many other applications. It is the ideal meter to help make sure that your EC/TDS/Temp. needs are being met and are reliable results for your analysis. Keep EC/TDS/TEMP. in your target range to help your achieve best results.
DESIGN FEATURES
Measures EC/TDS/Temp. with automatic temperature compensation (ATC).
Ideal range for all different applications (0 to 3999 uS/cm) | 0 to 2000 ppm | 0.0 to 60°C (32.0 to 140.0°F).
Units in uS/cm or ppm easily convertable to other ranges.
Factory calibrated with the ability to recalibrate if needed.
Replaceable electrode Mi59P.
Fully waterproof to IP65.
Approximately 100 hours of use (4 x 1.5V batteries included).
CARE AND USE
MAINTENANCE
EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap water after every use.
CONVERTING EC TO TDS
The Milwaukee PRO Conductivity Tester, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.
EC/TDS can converted. Different scales include the 500 scale, 650 scale and the 700 scale.
Your uS/cm reading can be approximately converted to other scales as shown in the examples below.
2.00 mS/cm = 2000 uS/cm = 1000 ppm on .50 factor scale
2.00 mS/cm = 2000 uS/cm = 1400 ppm on the 442 scale or .70 factor scale
Pentair Quick Change are designed for easy installation and filter change.
The cartridge filter is easily changed with a quarter-turn of the filter. Water is automatically shut off during the change of the filter through the auto shut-off feature built into the filter head. This feature eliminates the need for additional shut-off valves to and from the filter system.
Easy to install, easy filter change
Filter life 500 gallons (1890 L)
Flow rate 0.50 gpm (1.9 L/min)
0.5 Micron rating
PENTEK's quick-change filter system applications include:
under-sink drinking water
refrigerator/icemaker
pre/post RO membrane
vending machine
ice machine
coffee machine
other OEM applications
The filters are intended to purify water from sediment particles such as rust, sand, scale, silt etc.
Specification
The replacement filter is a roll of fiber polypropylene manufactured by using melt blowing process.
The required degree of rigidity is achieved without using a core by melting fibers into a rigid structure.
Complete set of replacement replacement filter cartridges for 6 Stage Reverse Osmosis System
(Stage 1) 10 Micron Sediment Filter
(Stage 2) Activated Carbon Block Filter
(Stage 3) Activated Carbon Block
(Stage 4) Reverse Osmosis Membrane (not included)
(Stage 5) Post Carbon filter
This replacement Reverse Osmosis Filter set is suitable for all leading brands of RO System.
Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.
M10007B is a lab grade pH 7.01 calibration solution certified to meet the standard with an accuracy of ±0.01 pH removing the inaccuracies involved with mixing solutions from powder.
Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution.
Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.
DESIGN FEATURES
pH 7.01 Calibration Buffer Solution - 20 mL
Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings
Sealed against light and air
Ideal for on-the-spot calibration
Simply open, insert the tester or electrode into the sachet and calibrate
Formulated with a 5 year expiry
Colour coded for easy identification
Whole House Purification
Experience clean and safe water throughout your entire home with the 3 Stage Big Blue 20" Water Purifier and Softener Filter Kit. This advanced system is designed to effectively remove impurities, eliminate chlorine taste, and reduce unpleasant odors from your water supply. Ensure your family's health and well-being with this comprehensive whole house filtration solution.
Chlorine Taste & Odor Reduction
Say goodbye to the harsh taste and smell of chlorine in your drinking water with our high-performance water filtration system. The three-stage filtration process targets chlorine molecules, ensuring that every drop of water is free from contaminants and odors. Enjoy refreshing and pure water straight from your tap, shower, or any other outlet in your home.
Water Softening Technology
In addition to purifying your water, this innovative system also incorporates water softening technology to prevent mineral buildup and extend the life of your appliances. Say goodbye to limescale deposits on your fixtures and dishes, and enjoy softer skin and hair after bathing. Invest in the 3 Stage Big Blue 20" Water Purifier and Softener Filter Kit for a complete water treatment solution for your home.
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out.Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
The Hailea - T4000 Pond Pumps are without doubt one the best value pumps on the market today.
These T4000 Pond Pumps represent great value for money they are also a low wattage pump and most of all ultra reliable.
The whole Hailea T range can either be used dry inline just like the Aquamax pumps , or submerged therefore making them totally at home most environments. They have the same 1.5 inch threaded inlet and outlet
The T - Pump also has a built in thermal overload safety device to protect the pump.
Hailea Pump range are now the best selling range of pumps on the market today
Specifications
Dimensions: 359 x 135 x 162mm
Power consumption: 45 Watts
Turnover rate: 3600ltrs/hr (800) gls
Head: 2.6
Weight: 4.5 kg Approx
Voltage: 220-240v/50Hz
Cable Length: 10 Meters
Inlet - Outlet Size: 1.5 inch BSP - inlet - Outlet 1.5 inch BSP
This filter head with integral bracket, is designed to accommodate the PRISM range of encapsulated food service cartridges. Designed with a simple insert and twist action for cartridge fitting, the head comes with push fit connections for easy installation.
The most popular wound cartridge media by far, the PRISM wound polypropylene offers broad chemical compatibility and good temperature resistance at low cost. With over 50 years proven experience and in a variety of micron sizes, across regular and large diameters, the DWPP provides a basic filtration solution perfectly suited for first-stage and general particulate reduction. Whilst newer spun technologies offer higher efficiency and longer life cartridges, wounds still exceed filtration standards in many applications.
