For use in the PBH plastic bag housings, this range of bags proves a simple and economic solution for the removal of particulate. PBH bags are uniquein design, fitting in an internal support basket to maximise the filtration surface area and are easy for operators to changeout. Available in washable nylon mesh in 50 to 600 micron and in polypropylene felt in 1 to 200 micron.BN Series (Strainer)
Woven monofilment materials are offered in nylon with micron ratings of 50 to 800
Efficiencies from 75 to 95 percent
Materials are cleanable and reusable
Features and Benefits
Semi-rigid cylindrical design is easily crushed and incinerated
For use with Pentair Pentek PBH-410 Housing
Higher productivity – faster bag “change-outs”
Thermally welded unique design results in consistent filtration efficiencies
Nominal 1-800 micron ratings
Aquafilter FCPS50M10B 10" Big Blue series cartridges are NSF certified using FDA approved polypropylene for material requirements. The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. FCPS50M10B uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. Polypropylene fibers are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems. FCPS50M10B series cartridges are an ideal true depth filters and can be used for filtration of cold potable water. Aquafilter wide range of melt-blown cartridges has multiple fiber zones. These multi-fibre zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: PP
Filter life: 6-12 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 50
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
Aquafilter FCPS50 10" series cartridges are NSF certified using FDA approved polypropylene for material requirements. The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. FCPS1 uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. Polypropylene fibers are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems. FCPS1 series cartridges are an ideal true depth filters and can be used for filtration of cold potable water. Aquafilter wide range of melt-blown cartridges has multiple fiber zones. These multi-fibre zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: PP
Filter life: up to 6 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 10
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
Aquafilter set of 3 replacement cartridges set:
FCPP5 - polypropylene yarn cartridges
PRISM Plus Carbon Cartridge
FCPRA-C- anti-scale and coconut shell GAC carbon cartridge
Filter Life: up to 6 months or 37000 litres
accurate pH calibration
Ensure precise calibrations with the Milwaukee M10004B pH 4.01 Calibration Solution Sachet. This pack contains 25 individual sachets of pH 4.01 solution, providing a reliable option for calibrating pH meters and electrodes. Each sachet is conveniently pre-measured for easy use and eliminates the need for measuring out liquid solutions.
high-quality formulation
The Milwaukee M10004B pH 4.01 Calibration Solution Sachet is made with high-quality ingredients to ensure accuracy and consistency in pH readings. The solution is specially formulated to maintain a pH level of 4.01, making it ideal for calibrating a wide range of pH meters used in various applications. Trust this reliable solution for your calibration needs.
convenient packaging
Each sachet in the Milwaukee M10004B pH 4.01 Calibration Solution pack is individually sealed to prevent contamination and maintain freshness. The compact size of the sachets makes them easy to store and transport, providing convenience for both laboratory and field use. Stay prepared with this convenient pack of calibration solutions for your pH testing equipment.
Set contains
FCPS5 sediment cartridge
FCPRA10 anti-scale cartridge filled with polyphosphate
FCCST Water softening cartridge
Stage 1Sediment filter removes sand, rust, silt and other sediments up to 5 micron
Stage 2FCPRA cartridges provide a strong inhibition against scaling processes in which calcium, magnesium, iron and manganese are involved. By preventing the scale deposition of many compounds, FCPRA extends the service life of your water pipes , boilers and heating elements, enhancing an efficient and clean supply of your drinking water.
Stage 3FCCST Water softening cartridge. Through its accurate media consisted of ion exchange-based resin, FCCST reduces calcium and magnesium. In case your feed water contains a high concentration of suspended matter. The softening effect takes place within the filter without adding any salt or chemicals into the water. The filter removes harmful substances and reduce limescale, prolonging life-span of your home appliances such as washing machine or dishwasher and saving you money.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
Aquafilter set of 3 replacement cartridges set:
FCPS5-AB - polypropylene yarn cartridges
PRISM Plus Carbon Cartridge
FCCST2- water softening and iron reducing cartridge
Filter Life: 6 months or 37000 litres
Versatile installation - can be mounted inside or outside water. Thermally protected with auto-resetting thermal cut out.Ideal for continuous or intermittent duty. Synchronous motor gives high performance and low running costs. Vortex impeller handles up to 8mm solid particulate.
The Hailea - T18000 Pond Pumps are without doubt one the best value pumps on the market today.
These T18000 Pond Pumps represent great value for money they are also a low wattage pump and most of all ultra reliable.
The whole Hailea T range can either be used dry inline just like the Aquamax pumps , or submerged therefore making them totally at home most environments. They have the same 1.5 inch threaded inlet and outlet
The T - Pump also has a built in thermal overload safety device to protect the pump.
Hailea Pump range are now the best selling range of pumps on the market today
Specifications
Dimensions: 410mm L x 155mm W x 189mm H
Power consumption: 285 Watts
Turnover rate: 17350ltrs/hr (3855) gls
Head: 6.1
Weight: 5.9 kg Approx
Voltage: 220-240v/50Hz
Cable Length: 10 Meters
Inlet - Outlet Size: 1.5 inch BSP - inlet - Outlet 1.5 inch BSP
The Milwaukee MW803 MAX Waterproof Low Range 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers.
The Milwaukee MW803 MAX Waterproof 4-in-1 Tester offers:
ACCURACY
The MW803 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% Full Scale and ±0.5°C / ±1°F for temperature.
With automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.
LONG LIFE
The tester comes with a replaceable pH probe with a double junction probe design for longer life.
FAST RESPONSE
An exposed temperature probe is located close to the pH probe for fast temperature compensation.
WATERPROOF CONSTRUCTION
No more worries about dropping your tester while measuring. The MW803 is fully waterproof to IP65.
LIGHT WEIGHT
At just 3.5 ounces, the MW803 MAX is easy to handle at up to half the weight of other testers.
EASE-OF-USE
A large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out.
DESIGN FEATURES
Fast easy to read results with large digital dual LCD readout.
Extreme accuracy to ±0.05 pH, EC / TDS 2% Full Scale and Temperature ±0.5 C / ±1 F.
Range 0.00 – 14.00 pH | EC 0 to 3999 uS/cm | TDS 0 - 2000 ppm | Temperature: 0.0 to 50.0 C / 32.0 to 122.0 F.
Lightweight and portable at just 3.5 ounces.
Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
Simple push button, automatic 1 or 2 point pH calibration with 5 saved calibration points and simple 1 point EC calibration.
Gel-filled, double junction pH electrode for low maintenance and high performance with exposed temp. sensor for fast readings.
Auto shut off after 8 minutes of non-use.
Fully waterproof to IP65.
Battery life approx. 100 hour of continuous use (batteries included).
CARE AND USE
The MW803 PRO Tester includes both a pH and EC electrode. Both need maintenance.
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!
EC sensors are more robust but can still be affected by residue build up.
Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor.
4. Gently stir the PRO Tester in the sample for a faster result.
5. Rinse in water after every test.
Thank you for considering Milwaukee to help you take your results to the next level.
The Milwaukee T75 Waterproof Total Dissolved Solids (TDS) Pen is designed for, aquariums, aquaculture, education, water conditioning and many other applications. The T75 helps you make sure that your fish have the right TDS balance to help them stay healthy. TDS also help keep filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results.
DESIGN FEATURES
Measures Total Dissolved (TDS) direct and with automatic temperature compensation.
Easy-to-read LCD.
Ideal range for aquariums (0 to 1999 ppm).
Units in ppm easily convertible to uS/cm.
Factory calibrated with the ability to recalibrate if needed.
250 hours continuous use (3 x 1.5V batteries included).
Simple one point calibration.
Fully waterproof to IP65
Replaceable TDS electrode MA73075.
CARE AND USE
MAINTENANCE
TDS/PPM electrodes can develop nutrient build up over time. To miminice build up, always rinse the probe in fresh tap or DI water after every use.
CONVERTING TDS TO EC
The Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution.
TDS/PPM is often converted to uS/cm. Different scales include the 500 scale, 650 scale and the 700 scale.
Your TDS/PPM readings can be approximately converted to uS/cm as shown in the examples below.
1 ppm = 2 uS/cm on the 0.5 factor scale
1 ppm = 1.43 µS/cm on the 442 scale or .70 factor scale
Thank you for considering Milwaukee to help you take your results to the next level.
Utilising a traditional single layer manufacturing method, the PRISM range of bags offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications. PRISM polypropylene and polyethylene felt bags also benefit from an all welded seam construction, meaning they are capable of holding several kg's whilst maintaining filter integrity. Heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.
