Aquafilter filter housing FHPRCL12-B-TWIN 1/2" BSP two stage system with two blue filter heads with 1/2" BSP brass inserts, and two transparent filter housing sumps, wrench and color box.Set includes: FHPRCL12-B-TWIN 1/2" BSP system, wrench, 2 bacteriostatic centrering rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 1/2" BSP
Minimum Temp: 2°C
Maximum Temp: 43°C
Maximum pressure: 6 bar (90 ) PSI
Transparent Sump: PET
Filter Cap: PP
Number of O-rings: 2
Pressure Relief Valve: Yes
AQUAFILTER FCCEL5M10B Big Blue cartridges are manufactured from durable polyester non-woven fabric. They contain no binders or cellulose and have been developed specifically for drinking and bottled water applications. In order to provide increased surface area and longer life, FCCEL5M10B series cartridges are pleated around a polypropylene core. The core gives the cartridges additional strength. The end caps are immersed in a vinyl plastisol which fuses these components together acting as both an endcap and a gasket. FCCEL5M10B series cartridges provide great sediment removal and dirt holding capacity to extend the time between cartridge changeouts. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect boilers and pluming systems. Utilizing 100% synthetic media makes FCCEL5M10B series cartridges washable and reusable. If the cartridge becomes clogged you can easily clean it by direct spray into pleats to dislodge sediment or let dry and brush off filter cake from surface of the media. FCCEL5M10B series cartridges are bacteria and chemical resistant. They are characterized with very low pressure drop.FCCEL5M10B series cartridges are typically used as a first stage of potable water filtration.Specifications:
Micron rating: 5
Length: 10"
Outer diameter: 4 1/2"
Inner diameter: 1,1"
Min. feedwater temp. 2°C
Max. feedwater temp. 60°C
Avg. Efficiency: 87%
Aquafilter FCCBL20BB 20" Big Blue Carbon block cartridge. Aquafilter FCCBL20BB cartridge suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its block activated carbon media, FCCBL20BB cartridges improve the bad taste and odour of your drinking water. By reducing the concentration of chlorine and organic compounds (VOC’s), FCCBL20BB series enhances the continuous supply of fresh and clean drinking water.Specifications:
Media: bituminous activated carbon
Filter Life: up to 6 months or 109000l
Size : 20" x 4 1/2"
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 80°C
Contaminant Removal: Chlorine, VOC's
End caps: PP
Gasket: Silicone
Netting: LDPE
The filters are intended to purify water from sediment particles such as rust, sand, scale, silt etc.
Specification
The replacement filter is a roll of fiber polypropylene manufactured by using melt blowing process.
The required degree of rigidity is achieved without using a core by melting fibers into a rigid structure.
Aquafilter set of 3 replacement cartridges set:
FCPS5- melt-blown 5 micron sediment filter cartridge
FCCBL-P- carbon block cartridge
FCCST2- water softening and iron reducing cartridge
Filter Life: up to 6 months or 16000 litres
Aquafilter FCCBKDF2 Coconut shell GAC carbon cartridge with KDF and softening media. Aquafilter FCCBKDF2 are state-of-the-art multimedia filter cartridges. GAC-type cartridges are designed such that water flows from bottom to top, ensuring a long contact time, allowing for maximum adsorption and treatment. Utilizing a highly efficient longitudinal flow for greater carbon contact time, FCCBKDF2 is ideal where a long contact time allows for high chlorine as well as other organic reductions. Cartridges are filled with water washed coconut shell activated carbon, high-capacity strongly acidic ion exchange resin and KDF-55. Each layer plays an important role in potable water purification. KDF utilizing redox reactions kills or inhibits bacteria growth, converts chlorine to chlorides and removes iron, hydrogen sulphide and heavy metals (lead, arsenic, etc.). Used in combination with Activated Carbon, KDF can significantly extend the life of filter cartridges. Coconut shell activate carbon used in filter cartridges removes chlorine from water, solvents and aromatic hydrocarbons (improves the taste and odour) and compounds, phenol, benzene, and organic substances. Ion exchange resin softens water replacing hardness minerals (calcium and magnesium) with sodium ions. Additionally FCCBKDF2 cartridges are equipped with post-filter which prevents filtration media from being washed out.Specifications:Media: NSF approved Coconut Shell GAC and KDF-55, strongly acidic cation exchange resinFilter Life: up to 6 monthsSize : 10" x 4 1/2"Operating Pressure: 6 barMin. feedwater temp. 2°CMax. feedwater temp. 55°CContaminant Removal: Chlorine, VOC's, heavy metals, ferrous, iron, hydrogen sulphide, scaleEnd caps: PPGasket: SiliconeBody: HDPEPost-filter: PP
Complete set of replacement replacement filter cartridges for 6 Stage Reverse Osmosis System
(Stage 1) 10 Micron Sediment Filter
(Stage 2) Activated Carbon Block Filter
(Stage 3) Activated Carbon Block
(Stage 4) Reverse Osmosis Membrane (not included)
(Stage 5) Post Carbon filter AICRO-QC
(Stage 6) Mineral cartridge: AIMRO-QC
This replacement Reverse Osmosis Filter set is suitable for all leading brands of RO System.
Aquafilter 10'' Set of 3 Replacement Filters Whole House Water Purifier and Softener Set contains: FCPP5 Yarn string wound sediment Premium FCCBL activated carbon block cartridge FCPRA-C Coconut Shell GAC and Anti-Scale Water Filter Stage 1:Yarn sediment filter removes sand, rust, silt and other sediments up to 5 micron Stage 2Activated carbon block cartridge removes levels of Chlorine, Organic Compounds, Pesticides, Herbicides, Trihalomethanes and Volatile Organic Compounds (VOCs).
Additionally, the cation exchange based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean water. Stage 3The FCPRA-C filter cartridges require very little maintenance, no back-washing and no salt. Coconut shell activated carbon used in filter cartridges removes chlorine from water, solvents and aromatic hydrocarbons (improves the taste and odour) and compounds, phenol, benzene, and organic substances. FCPRA-C is equipped with a post-filter pad to prevent carbon from being washed out and to avoid blockage if high particulate is present.
Specifications:
Maximum Operating Pressure: 6 bar (90 psi)
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
This Milwaukee 3-in-1 Low Range combo meter allows you to measure pH, EC (conductivity) and TDS with a single meter and one single probe.
WHAT PEOPLE ARE SAYING
"Superb meter, easy to use, great customer service."
"Best meter I have ever owned."
"The best meter on the market and Milwaukee customer service is the best."
"I have owned this meter for almost 8 years and only replaced the probe once. The calibration nobs are easy to use, and even when I am less then gentle with the thing it keeps on going. I wouldn't consider any other meter."
"Easy calibration features."
"Light weight and ergonomic."
SUMMARY
pH and TDS are critical for water conditioning and aquariums. Total Dissolved Solids in drinking water can effect clarity and taste of water. In addition, high TDS levels can effect the health of a fish in an aquarium. High concentrations of TDS can decrease clarity of water in aquariums and decrease photosynthesis in aquatic plants.
The Milwaukee MW801 PRO Low Range Combo Meter lets you easily and accurately test pH, conductivity and total dissolved solids (TDS) using a single meter and integrated probe.
Simple, portable and rugged. No more juggling multiple electrodes and wires. Automatic temperature compensaton included.
The MW801 is the ultimate solution for pH and nutrient management.
DESIGN FEATURES
The design of the MW801 is focused on simple operation and ruggedness. With a single probe, big screen, easy calibration, the MW801 is exceptionally simple to operate.
A tough meter build and a rugged but replaceable probe means that you can expect years of use.
The Milwaukee PRO Combo meter offers:
pH, conductivity / nutrient EC, TDS (ppm) with automatic temperature compensation.
A replaceable, integrated pH, EC, and TDS (ppm) probe with a single 3 foot cable for easy use (SE600 probe included).
A fiber junction on the pH sensor to reduce contamination when measuring fertilizer solutions.
A light weight and portable form factor at just 5.8 ounces with battery and just over 3 inches wide.
A large easy to read display.
Factory calibration with a simple, single point manual calibration for both pH and EC.
A reputation for a rugged build and long life
Specialized design for drinking water, aquaponic, and aquariums.
CARE AND USE
The MW801 PRO Combo Meter includes both a pH and EC sensor in the SE600 integrated probe. All pH sensors have a limited life and response time gets longer with age. EC sensors are more robust but can still be affected by residue build up. Both need maintenance. Properly maintaining your probe will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH/EC electrode before use!
Here are our top four tips.
1. Always store with the cap full of buffer or storage solution not water.
2. Clean your probe regularly by soaking in cleaning solution.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor.
4. Gently stir the probe in the sample for a faster result.
Thank you for considering Milwaukee to help you take your results to the next level.
Aquafilter filter housing FHPRN12-B-TWIN 1/2" BSP two stage system with two blue filter heads with 1/2" BSP brass inserts, and two blue filter housing sumps, wrench and colour box.
Set includes: FHPRN12-B-TWIN system, wrench, 2 bacteriostatic centring rings, instruction and colour box.Features
High quality
Hand Built & Factory Tested
Ideal for family use as POE
Heavy-duty filter housing
Systems ready to install
Manufactured from FDA CFR-21 compliant materials
Made in EU with High Performance Components
Specifications:
Thread Diameter: 1/2" BSP
Minimum Temp.: 2°C
Maximum Temp.:43°C
Maximum pressure: 6 bar (90 PSI)
Blue Sump: PP
Filter Cap: PP
Number of O-rings inside filter housing head: 2
Pressure Relief Valve: Yes
The Hailea Aquarium Chiller HC2200BH is suitable for aquariums up to 2000 litres in size and has a recommended flow rate of up to 3000~6000 litres per hour. Demonstrating a high quality design with superb precision, the low noise producing chiller has an accurate and highly legible digital display with clear numbering and functions for fast operation.
The Hailea HC chillers use the environmentally friendly refrigerant R134a and are built from a solid steel chassis with anti-corrosive pure titanium evaporator for fresh or salt water use.
The HC range of Chillers from Hailea have a modern contemporary design.
At a Glance:
For Aquariums up to 2000 Litres
Dimensions L634mm x W468mm x H580mm
Recommended Flow rate - 1500 ~4000L/H
High Output 1800 watts
Water Refrigerated: 2000 litres
Suitable for freshwater and saltwater aquariums
Low noise producing chiller
Accurate digital display.
Built from solid steel chassis
Anti-corrosive pure titanium evaporator
Modern contemporary design
High quality materials
Superb precision
Easy to operate
Highly legible display for instant and easy operation
Weight: 47.0 Kg
