This 55W UV unit with full WRAS approval is ideal for 3-4 bedroom family homes with no more than 2 bathrooms. They're also great for other light applications where the water quality is relatively good, but there is a bacteriological issue.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 42l/min or 2.5m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced..Features & Benefits
Reduces particles as small as 0.5 micron in size by mechanical means
NSF/ANSI Standard 53 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means
Premium dirt-holding capacity
Outstanding chlorine taste & odour reduction
True depth filtration
High flow rates and low pressure drop similar to a nominal 10-micron cartridge
Maximum life - dirt-holding ability of a 10-micron carbon block with the particulate efficiency of a 0.5-micron cartridge
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Netting – Polyethylene
Gaskets – Santoprene
Temperature Rating – 40-180°F (4.4-82.2°C)
Following successful field trials of a new micro bubble diffuser designed for the fish farming industry, Mantec has now launched an enhanced variant of the product into the market place under the brand CORALith. Building on our heritage of supplying more than 300,000 ceramic diffusers in the past 20 years, this new micro bubble diffuser introduces very small bubbles into the body of water, resulting in more surface area per unit volume and greater oxygen transfer exchange. In addition, agglomeration of bubbles as they rise to the surface is minimised.
Mantec has been active in the supply of ceramic diffusers into the aquaculture sector since the 1990s. In recent times, the sector is increasingly demanding diffusers which produce the finest bubbles to ensure adequate and efficient oxygenation of the water in which fish are farmed. The need for finer bubbles is grounded on maximising the oxygen transfer at greater water depths.With this in mind Sterner's new Mantec diffuser is based on a porous ceramic tube, having a closely controlled pore size of one micron. This results in even, fine bubbles to produce efficient oxygen transfer. Fitted with two square stainless steel end caps, the CORALith diffuser assembly can be positioned in the tank in any horizontal orientation, without the operator having to be concerned that the diffuser is sitting flat on the base of the tank. The diffuser assembly is designed with a replaceable ceramic tube.Furthermore, the diffuser has been designed to minimise any potential leak paths, thereby ensuring the efficiency of oxygen transfer. Thanks to its robust construction, the operator need not be concerned about removing the diffuser from the tank when the oxygen feed remains switched on. In addition, the hose tail coupling does not rely on push-fit connections, instead it is secured with a British Standard Pipe thread to provide a secure connection with the mating hose.
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
Green drive technology – energy efficient motors low power consumption. Specially formulated diaphragm material for extended life. Due to no wearing parts no reduction in performance. Robust and compact construction – weatherproofEasy to service with competitively priced spares kit. Suited to intermittent or continuous duty applications. Whisper quiet operation as low as 35db ET40 Pump:
Product Type: Oil Free Air
Maximum Flow: 40 Litres Per Minute @ 0.12 bar
Power Consumption: 30 Watts
Weight: 4.3 kgs
Dimensions: 218mm Long x 156mm Wide x 182mm High
Connector Size: 14mm
Accessories Included: Screw in brass connector, L shaped elbow & 2 hose clips
Supply Voltage: 220v - 240v 50Hz
Aquafilter FCPP10 series cartridges are made of FDA-approved polypropylene string wound on a polypropylene core which strenghtens the cartridge. It has a broad chemical compatibility, good temperature resistance and low cost. FCPP10 series cartridges are primarily used as the first stage of filtration of cold potable water. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems.Specifications:
Filter media: PP
Filter Life: up to 6 months
Core: PP or PET
Nominal micron rating: 10
Min. feedwater temp. 2°C
Max. feedwater temp. 65°C
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1,1”
Avg. Efficiency: 90%
Aquafilter FCPS5-AB Melt-blown antimicrobial/antibacterial polypropylene filter cartridge. These durable melt-blown water filter cartridges are the only cartridges available treated with Antimicrobial/Antibacterial nanosilver BACINIX technology. This technology is new to the water filter industry and Aquafilter is the only firm offering this advanced technology within a wide range of product lines. Antimicrobial/Antibacterial technology has been used in the medical industry and is branching out into water treatment industries. This technology helps destroy bacteria as well as inhibit the growth of mold. The blue color of the filter indicates that it has been treated for additional safety. The Aquafilter range of melt-blown cartridges have multiple fibre zones. These multi-fiber zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fiber zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: Pure PP + ANTIMICROBIAL AGENT
Filter life: 6-12 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 5
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
Aquafilter FCPS20 10" series cartridges are NSF certified using FDA approved polypropylene for material requirements. The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. FCPS20 uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. Polypropylene fibers are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems. FCPS20 series cartridges are an ideal true depth filters and can be used for filtration of cold potable water. Aquafilter wide range of melt-blown cartridges has multiple fiber zones. These multi-fibre zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: PP
Filter life: up to 6 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 20
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
The Milwaukee MW11 Total Chlorine Photometer lets you go digital with your testing. No more hit and miss testing with strips. Great for aquariums, aquaculture & coral, labs, water conditioning , classroom and more. This meter is also ideal for educators that want their students to learn the basics of water quality analysis to apply in the real world.
Simply add the reagent and get a digital reading accurate to ±0.03 ppm within minutes.
DESIGN FEATURES
Fast, easy-to-read results with large digital LCD readout.
Range from 0.00 to 3.50 ppm.
Accurate to ±0.03 ppm or ±3% of reading @ 25 °C.
Small and ergonomic design.
No calibration needed.
Reliable and repeatable measurements with no visual assessment.
Runs on 1 x AAA battery with auto shut off to extend battery life.
Adaptation of the USEPA Method 330.5. The reaction between Free Clorine and DPD causes a slight pink tint in the sample.
Thank you for considering Milwaukee to help you take your results to the next level.
