With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.
With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.
ACC-4 Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. ACC-4 series Aquafilter carbon Block filter cartridge for VOC reduction is manufactured by extrusion, using mix blend GAC granular activated carbon media for improved reduction of chlorine taste and odor, and high adsorptive capacity. The 5-micron carbon block and is ideal for use as a reverse osmosis prefilter or postfilter.
Aquafilter offers FCCBL-S cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its accurate combination of mixed granular activated carbon (GAC) media, FCCBL-S series improves the bad taste and odour of your drinking water by reducing the concentration of chlorine and organic compounds (VOC’s). Additionally, the cation exchange-based resin water softening process is performed by the decrease of calcium and magnesium content, enhancing the obtaining of fresh and clean drinking water.
Aquafilter FCCBHD-STO 10" GAC coconut shell series cartridges have been our most popular carbon cartridges for years. GAC-type cartridges are designed such that water flows from bottom to top, ensuring long contact time, allowing for maximum adsorption and treatment. Utilizing a highly efficient longitudinal flow for greater carbon contact time, FCCBHD-STO is ideal where a long contact time allows for high chlorine as well as other organic reductions. Using a clean, water-washed NSF approved coconut shell activated carbon with a large mesh size, this granular range is primarily a chlorine, taste and odour reduction cartridge with the advantage of a post-filter pad to prevent carbon from being washed out and to avoid blockage if high particulate is present. According to internal laboratory studies cartridge removes 99% of free chlorine, 85% of certain pesticides, solvents, aromatic hydrocarbons, fenol, benzen and other organic compounds.Specifications:
Media: FDA and NSF approved Coconut Shell GAC
Filter Life: up to 6 months
Size : 10” x 2 1/2”
Operating Pressure: 6 bar
Min. feedwater temp. 2°C
Max. feedwater temp. 55°C
Contaminant Removal: Chlorine, VOC's
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
ACC-1 carbon filter cartridge uses mix blend of activated carbons to filter particles helps reduce unwanted taste, odours, dirt, chlorine and other contaminants from your water supply like VOCs from water supply systems. Installing an up flow non-backwashing carbon filter is an easy, cost-effective way to remove chlorine taste and odour from city or well water. Up flow filters are simple to install and do not need electricity or drain connections to function. These water filters force water through the carbon media from und from potable water.
Aquafilter offers FCCA cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its blend of mixed activated carbon and special media, FCCA cartridges improve the bad taste and odour of your drinking water. By reducing the concentration of chlorine and organic compounds (VOC’s), FCCA series enhances the continuous supply of fresh and clean drinking water.
The feed spreader significantly reduces capital and operating costs since it really does minimize feed system wastage. This is mainly attributed to the feed spreader's high-efficiency bearing, which allows significantly lower blower pressure (reportedly 30% lower) to produce a given spread radius. Consequently, there is much-reduced feed breakage and fat melt.
The feed spreader minimizes site labour requirements in several ways:
It requires no routine maintenance during the growth cycle, nor is any lubrication needed
It safely withstands vigorous water flushing of feed pipes without the need to be disconnected before pipe flushing
It is simple and quick to assemble, ready for site deployment
About the feed spreader
Self-cleaning (the bearing is open and is cleaned by air, rainwater, and seawater)
Produced for 90 mm feed pipes
Spare parts are well-priced and always in storage at our head quarters
Easily installed-the fish farmer manages the installation singlehandedly
2-years warranty
Our Wedeco - SLR 32143/4P UV Light Bulb For Germicidal Water Treatment is a 187 watts UV bulb that has a lamp length of 38.78 inches. The bulb has a base of four pin and is made using ceramic as its base material. The lamp has an average lifespan of 10,000 hours after which it must be replaced for better performance of your system
UV-C light is not a chemical but a physical process, which means that there is no change in the chemistry, pH and taste of water when UV light passes through it. The fixture is high on quality and has low mercury dosage to meet the demands of the environment. Since the light bulbs are intended to destroy microorganisms it is necessary to schedule replacement of the bulbs annually to ensure efficiency of the system. These high-quality lamps can last for approximately 10,000 working hours after which the UV output reduces though the UV lamp emits bright light.
Compatibility:
Ideal Horizons 38595
UVDRX-1613
11270-C
AF25
W00025
Wedeco 6101277
Wedeco 6102167
EcoRay 32143/4P
TAK33
TAK55
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Marine and more
Technical Specification:
Wattage: 187 Watts
Wavelength range: 254NM
Length: 38.78 inches (985mm)
Base: 4 pin
Base Material: Ceramic
Average Lifespan: Up to 10,000 hours
Wedeco quartz sleeves offer optimal protection against fractures caused by internal stresses, external mechanical forces, vibration and lamp-water temperature differentials. Robust and scratch-resistant, they also reduce fouling.
The OceanCable is a wear-proof marine cable used by fish farmers around the world. It is used to supply electrical power to and between farming cages, underwater lights, and other sea-based installations.
OverviewThe renowned blue cable is produced from high-quality materials and is designed for use in extreme weather conditions. It has a virtually unlimited life expectancy when in an undisturbed installation. Should the cable require replacement, it is normally due to physical damage rather than wear. OceanCable does not require a conduit or tube; it can be installed directly into the sea. The outer sheath is produced out of highly wear-proof PU (Polyurethane) surrounding the individual conductor insulation. Such construction ensures a very strong cable and protects the copper from wear. The core covering is replaced with insulation – extruded polyolefin compound – that gives it high flexibility. The conductors consist of stranded, flexible copper. DESIGNED FOR EXTREME WEATHER CONDITIONS With three decades of experience, our products have become high in demand in the aquaculture industry. We believe that simple and durable technology is key to efficient and profitable fish farming. And this clearly resonates with our ever-growing client base that includes fish farmers in the Faroe Islands, Scotland, Norway, Canada, and other countries around the world. The OceanCable fish farming cables are used in some of the most exposed offshore fish farms in the North Atlantic. They provide a stable power supply in the most extreme weather conditions, as they are some of the most durable and promising marine cables on the market today.
AboutService temperature: -40 to +90 Celsius Minimum bending radius: 5xD Halogen-free Superior mechanical resistance against abrasion, tearing, pressure and wear Superior chemical resistance against fuels, oil, grease and other compounds Superior resistance against environmental factors such as ozone, UV rays, humidity and water
OptionsOCEANCABLE 3G2.5 MM² OCEANCABLE 5G2.5 MM² OCEANCABLE 5G6 MM² OCEANCABLE 5G10 MM² OCEANCABLE 5G16 MM² OCEANCABLE ETHERNET EXTREME CUSTOM CABLES
The demand for monitoring the environment in and around fish farming sites is increasing in scope. The GroSensor provides fish farmers with vital and highly reliable measurements of their environment. It measures dissolved oxygen levels and temperature, both crucial for ensuring the health and wellbeing of the fish.
Qualities
The GroSensor utilizes one of the best sensors in the world to ensure accurate readings. It includes data backup measures for secure data storage and is compatible with a variety of hardware and software solutions. The sensor is housed in a robust casing with a durable cable that can withstand some of the harshest conditions.
A durable, compact, and light-sensitive underwater video camera specifically developed for monitoring fish feeding in aquaculture. The GroCamera provides the fish farmer with an indispensable tool for monitoring and evaluating fish appetite, animal behaviour, and the general situation in the cage.
Qualities
The GroCamera is a small and compact device that is perfect for monitoring fish feeding in aquaculture. It is equipped with a wide-angle lens, ensuring a full view of what is happening in the fish cage. The camera is also light-sensitive, allowing for clear visibility even in low-light underwater conditions. The device is also designed to withstand harsh environments, with strong and durable casing and cable.
Better Efficiency and Less Waste
The use of GroCamera allows the operator to take direct control of a feed line’s delivery to a cage. Under observation, the camera can see if pellets descend below the main body of the fish. This is a clear indication that the appetite is satisfied. As a consequence, both feed wastage and seabed pollution can be minimized, and production efficiency optimized.
Our customers say that investment in GroCamera creates value from day one. The GroCamera is an optimal tool for the realization of maximum fish growth potential.