S810RL ultraviolet lamp.
Used in Sterilight and Viqua uv systems.
Length – 810 mm (31.90 inches).
Base – 4 pins stepped.
Full one-year warranty.
100% compatible with the OEM
Replace your lamp every 9000 hours or 12 months.
The Philips TUV 8W G8T5 is a ultraviolet or germicidal lamp. They are used in air purification and water disinfection systems. Common applications include air conditioning, private water supplies and aquaculture. We recommend replacing your lamp after 9000 hours or every 12 months to ensure maximum disinfection.
Type – Philips TUV 8W G8T5
Application – Air and Water Treatment
Power – 8 watts
Length – 300 mm
Cap – 2 pins
The Replacement Quartz Sleeve for Philips G30T8 and G55T8 UV Light Bulb for Germicidal Water Treatment is an open ended, high quality quartz sleeve that works well with water sterilisation filters, UV sterilisers and purifiers.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
HVAC and Air Conditioning units
Air purifier/treatment systems
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Surface disinfection
Marine and more
This 85W UV unit with full WRAS approval is ideal for commercial and light industrial applications. They're great for multi-residency water treatment plants, building services and process water applications where the water quality is already pretty good, but there's either an existing bacteriological issue, or there's a high risk that needs safeguarding against.
As a quick summary, the difference between the systems are as follow:
Altima – Basic system. Essentially comes with an LED to show it’s turned on.
Proxima – Upgraded system. Comes with display, alarms and countdown timer.
Maxima – Fully loaded. Comes with extra UV sensor and temperature sensor functionality.
The thing to remember in all this is that the system will function exactly the same way regardless of the system you have. The controller will turn the UV lamp on and monitor it. The functionality of the Proxima and Maxima systems are for ease of use and monitoring purposes. If in doubt, go for the Proxima system, they’re the most popular.
As you can see from the table, they will treat up to 225l/min or 13.0m³/hour and are fine to be left turned on for long periods (during periods of shutdown for example) but care will be needed when flow resumes, the heated water in the reactor will be quite hot.
This system comes with everything you need to fit and run it for the whole first year and is WRAS approved. The next thing you'll need to buy for the system is the lamp replacement that it'll need after the first year of operation.
The ArrowMAX 2.0, the most popular LED UV disinfection water treatment system from ACUVA, it inactivates 99.999% of E. coli bacteria. It comes with an Advanced Pre-filter, removing 99% of chlorine and lead, plus VOCs and unpleasant odours.
Supplied with a 120-240VAC power adapter and a 12V DC connection it provides high-performance UV water treatment without needing ongoing lamp replacement. Enjoy instant, on-demand, water treatment with low power requirements and without the drawbacks of legacy systems.
The ArrowMAX 2.0 is a great choice for boats, caravans and RV’s, office lunch rooms, or under the sink in any room of your home.
For in-home installations FILTEC recommend the ASV10 adapter for easy installation.
Compact and easy to install and ideal for retrofitting
No ongoing system maintenance only regular pre filter replacement required
Provides a flow rate of 2.0 litres per minute
Fill time for 1 cup of water 10 seconds
Can dispense 120,00 litres of water in its lifetime. Expected life is 7+ years.
Acuva Smart Faucet glows blue when the unit is activated.
High-quality compact polymer body casing with visual feedback on system performance
NSF/ANSI 55 Class ‘B’ and NSF/ANSI 372 certified by IAPMO R&T
QS-463 replacement quartz sleeve.
Used in conjunction with S463RL lamp.
Fits into Sterilight and Viqua S5Q, S5Q-PA, S5Q-Gold and SSM-24 uv disinfecion systems.
Supplied with two replacement O-rings.
High quality, fire polished quartz sleeve.
Length – 502mm
End Type – Open Both Ends
Layers of minerals and contaminants form over time on the surface of the quartz sleeve, impeding the strength or dosage of ultraviolet light into the water. The quartz sleeve be cleaned every 12 months when replacing the uv lamp. Depending on the quality of your water, you may need to remove the quartz sleeve and clean it every few months. We recommend replacing the quartz sleeve every 24 months.
The Philips TUV 6W G6T5 is a ultraviolet lamp which is used to purify air, water and hard surfaces. They are used in private water supplies, air conditioning units and aquaculture. We recommend replacing this lamp after 9000 hours or 12 months service. UV Lamps replaced annually ensure high system efficacy and maximum disinfection.
Lamp – Philips TUV 6W G6T5
Application – UV Disinfection
Power – 6 watts
Length – 226 mm
Cap – 2 pin
Life – 9000 hours
The Replacement Quartz Sleeve for Philips G15T8 and G25T8 UV Light Bulb for Germicidal Water Treatment is an open ended, high quality quartz sleeve that works well with water sterilisation filters, UV sterilisers and purifiers.
Common Applications:
Well water
Drinking water
Surface water
Municipal water
Wastewater
Food service/processing
Beverage service/processing
HVAC and Air Conditioning units
Air purifier/treatment systems
Hospitals
Aquaculture
Pools, Spas and Water Features
Chemicals
Oil, Gas and Power
Pulp, paper and wood
Electronics
Cosmetics
Pharmaceuticals
Hotels
Water bottlers
Laboratories
Surface disinfection
Marine and more
QS-330 Quartz Sleeve.
Used in conjunction with S330RL lamp.
Fits into Sterilight and Viqua VT4, S2Q-PA, SSM-17 and SC4 UV systems.
Supplied with two replacement O-rings.
High quality, fire polished quartz sleeve.
Length – 375 mm.
End Type – Open Both Ends.
Layers of minerals and contaminants form over time on the surface of the quartz sleeve, impeding the strength or dosage of ultraviolet light into the water. The quartz sleeve be cleaned every 12 months when replacing the uv lamp. Depending on the quality of your water, you may need to remove the quartz sleeve and clean it every few months.
We recommend replacing the quartz sleeve every 24 months.
This quartz sleeve offers a reliable fit for Wedeco Aquada 1 UV system. It's made with high-quality quartz to ensure a secure seal and maximum transparency, delivering intense, effective UV light.
This sleeve will fit the Aquada 1 Altima, Proxima and Maxima systems.
The Aquada 7/10 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 7/10 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 7/10 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 7/10 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 7/10 replacement lamp:
Safe and effective: The Aquada 7/10 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 7/10 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 7/10 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 7/10 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1880
Wavelength: 254 nm
Power output: 75 watts
Lifespan: Up to 10,000 hours
UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 1 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 1 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 1 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 1 replacement lamp:
Safe and effective: The Aquada 1 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 1 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 1 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 1 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1825
Wavelength: 254 nm
Power output: 25 watts
Lifespan: Up to 10,000 hours
