UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 1 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 1 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 1 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms.
Here are some of the benefits of using the Aquada 1 replacement lamp:
Safe and effective: The Aquada 1 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 1 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 1 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 1 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1825
Wavelength: 254 nm
Power output: 25 watts
Lifespan: Up to 10,000 hours
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced.Key Product Features
Outstanding sediment reduction ensures less plugging, meaning the CFB-Plus achieves its full chlorine reduction capacity
100% more chlorine, taste and odour reduction than original carbon blocks
Unique post filtration layer, fused to carbon/fibre media prevents carbon fines being released into the effluent stream
Tested and certified by NSF International to ANSI/NSF Standard 42
Manufactured entirely from FDA compliant materials
Part Numbers: CFB-PLUS-10, CFB-PLUS-20, CFB-PLUS-30, CFB-PLUS-10BB, CFB-PLUS-20BB
The Hailea HX4500 Water Pump is a low level multi function immersible pump which can provide powerful water circulation of strong consistent flow below the water level.
Hailea HX4500 comes complete with a venturi attachment for infusing additional air.
Venturi can also be used for the release of carbon dioxide into the water.
Flow rate: 2000 ltrs/hr. 440 GalsHead height: 2.8 mtrs.Power: 36 watts.Delivery outlet: 20 mm.Dimensions: L:150mm W:135mm H:120mm
Also suitable for indoor fountains; fountain statues and streams.
These Hailea Pumps are also ideal for use in Hydroponic sumps.
Aquafilter FCPP5 series cartridges are made of FDA-approved polypropylene string wound on a polypropylene core which strengthens the cartridge. It has a broad chemical compatibility, good temperature resistance and low cost. FCPP5 series cartridges are primarily used as the first stage of filtration of cold potable water. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems.Specifications:
Filter media: PP
Filter Life: up to 6 months
Core: PP or PET
Nominal micron rating: 5
Min. feedwater temp. 2°C
Max. feedwater temp. 65°C
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1,1”
Avg. Efficiency: 90%
Aquafilter FCPS20-AB Melt-blown antimicrobial/antibacterial polypropylene filter cartridge. These durable melt-blown water filter cartridges are the only cartridges available treated with Antimicrobial/Antibacterial nanosilver BACINIX technology. This technology is new to the water filter industry and Aquafilter is the only firm offering this advanced technology within a wide range of product lines. Antimicrobial/Antibacterial technology has been used in the medical industry and is branching out into water treatment industries. This technology helps destroy bacteria as well as inhibit the growth of mold. The blue color of the filter indicates that it has been treated for additional safety. The Aquafilter range of melt-blown cartridges have multiple fibre zones. These multi-fiber zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fiber zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: Pure PP + ANTIMICROBIAL AGENT
Filter life: 6-12 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 20
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
Philips TUV 25W G25T8 ultraviolet lamp. Length – 451mm. Base – G13. Used for Air and Water Disinfection in Private Water Supplies, Air Conditioning and Pond UV Filters.
Philips TUV 25W G25T8.
25 watt Philips ultraviolet lamp.
For air and water treatment units.
Length (incl. pins) – 451mm.
Base – 2 pins.
Life – 9000 hours.
The Philips TUV 6W G6T5 is a ultraviolet lamp which is used to purify air, water and hard surfaces. They are used in private water supplies, air conditioning units and aquaculture. We recommend replacing this lamp after 9000 hours or 12 months service. UV Lamps replaced annually ensure high system efficacy and maximum disinfection.
Lamp – Philips TUV 6W G6T5
Application – UV Disinfection
Power – 6 watts
Length – 226 mm
Cap – 2 pin
Life – 9000 hours
Bag filters are used to remove sediment, debris and gelatinous particles from liquids in higher flow or viscosity applications.Utilising a traditional single layer manufacturing method, the SPECTRUM Economic range offers the greatest option in terms of filtration media and neck seal type, providing a suitable solution for most bulk solid removal applications.Due to an all welded seam construction, Economic bags are capable of holding several kg’s in weight whilst maintaining filter integrity and their heavy duty handles make changeouts simple, avoiding operator contact with the unwanted filtrate.Each bag is manufactured from lot controlled raw media, individually labelled and finished with a total glazing process to inhibit fibre release.Features & Benefits
All sizes, micron ratings and neck ring options are available
Each bag includes a handle for fast, easy and cleaner removal
Seams on Polypropylene and Polyester felt bags are welded to prevent bypass
Materials of construction
Filter Media: Polypropylene, Polyester, Nylon
Neck Ring: Polypropylene
Construction: Thermal Bond (Nylon is sewn)
Construction notes
Economic felt bags are of welded construction, where the bag fabric is fused together to create a strong seal, reducing the possibility of loose, fibrous edges migrating downstream
Economic nylon mesh bags are heavy-duty double stitched
Certification
WRAS approved product
BS6920 compliant materials
The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.
The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.
DESIGN FEATURES
Fast, easy-to-read results with large digital LCD readout
Repeatable, accuracy to ±1.5% FS
Lightweight and portable
Simple 2 point open air calibration (see video below)
Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluorethylene (PTFE) membrane sensor
5 O-rings, membranes and one protective cap included
10 feet probe cable for extra flexibility when testing
70 hours of battery life with continuous use (battery included) with low battery warning
CARE AND USE
“OPEN AIR” CALIBRATION PROCEDURE
1. Remove the membrane
Take the membrane off the end of the probe and dry the diode off.
2. Zero out the display
Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.
3. Fill the membrane
Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)
4. Attach the membrane
Screw the membrane on to the probe.
5. Let stablize
Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)
6. Adjust
Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.
You are now calibrated.
EXTRA TIPS
Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
Always use fresh electrolyte solution (MA9071).
DOWNLOAD EXCEL WORKSHEET FOR TEMPERATURE COMPENSATION ON MW600 DO METER (XLS)
Determine water temperature, insert reading from meter display, and this worksheet will automatically calculate a temperature-compensated DO reading for you.
