Spare part for FIAP Belt Feeder
Being spare part for FIAP Belt Feeder, the high-precision movement made from stainless steel with its sapphire bearing is also available separately. We offer FIAP Belt Feeder Clock Unit with a run time of 4, 12 or 24 hours.
Carbon cartridges made with Fibredyne™ technology are far more advanced than traditional carbon block cartridges. Benefits of higher flow rates, lower pressure drops, higher treatment capacity and less susceptibility to premature blocking from sediment make them the leading carbon cartridges on the market.The fibres (coated in powdered activated carbon) have a very large surface area to offer increased capacity, more flow paths to allow for increased flow and reduced pressure drop and also create areas where sediment can be trapped.The construction methods used to manufacture Fibredyne™ cartridges allow for a variety of constituents to be incorporated that solve specific application problems. Lead and other heavy metals removal can be targeted, Cryptosporidium and Giardia cysts removed and developments that produce no fines or Sulphur release is a particular benefit in electroplating applications. Fibredyne™ technology also enables the use of moulded Santoprene gaskets, meaning no glues are used and the risk of end-caps being left in the housing during cartridge change is vastly reduced..Features & Benefits
Reduces particles as small as 0.5 micron in size by mechanical means
NSF/ANSI Standard 53 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means
Premium dirt-holding capacity
Outstanding chlorine taste & odour reduction
True depth filtration
High flow rates and low pressure drop similar to a nominal 10-micron cartridge
Maximum life - dirt-holding ability of a 10-micron carbon block with the particulate efficiency of a 0.5-micron cartridge
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Netting – Polyethylene
Gaskets – Santoprene
Temperature Rating – 40-180°F (4.4-82.2°C)
CBC Series are highly effective at reducing unwanted bad taste & odour and chlorine taste & odour from potable drinking water. They are an ideal choice for a wide range of residential, food service, commercial and industrial applications. They also make excellent polishing filters or pre-filters in applications requiring fine filtration and high capacity.Technical characteristicsLength (inches): 5, 10, 20, 10BB, 20BBMicron Rating (microns): 0.5Benefits99.95% reduction of Cryptosporidium, Giardia, Entamoeba and particles bigger than 0.5 micronsPremium high capacity bad taste & odour and chlorine taste & odour reductionNominal 0.5 micron rating
Pentek EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.Features & Benefits
High dirt-holding capacity maximizes utilization of the carbon block
Highly effective bad taste & odour and chlorine taste & odour reduction
Nominal 5-micron rating
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Outer Wrap – Polyolefin
Netting – Polyethylene
Gaskets – Buna-N
Temperature Rating – 40-180°F (4.4-82.2°C)
EPM Series cartridges are a modified version of our EP Series cartridge. An economical price makes this cartridge an attractive choice for taste, odour, and chlorine taste & odor reduction, as well as sediment filtration.EPM Series cartridges have a nominal 10-micron filtration rating, high porosity and chlorine taste & odour reduction. The high porosity design helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.These cartridges are protected by an outer wrap designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.Features & Benefits
Nominal 10-micron rating
Enhanced dirt holding capacity for extended cartridge life
Lowest pressure drop
Bad taste & odour and chlorine taste & odour reduction
Economically priced
Specifications
Filter Media – Bonded PAC
Endcaps – Polypropylene
Outer Wrap – Polyolefin
Netting – Polyethylene
Gaskets – Buna-N
Temperature Rating – 40-180°F (4.4-82.2°C)
The Mimosoa N5-45x2 Sector Antenna is the industry’s first sector antenna to deliver the best of both worlds — incredible noise rejection and long-distance performance, with wideband 4.9–6.4 GHz operation for fixed wireless broadband. The dual-slant polarization, 45º sector can be used with any third-party 2x2 MIMO radio solution, or two N5-45x2 antennas can be connected to the 4x4 MIMO Mimosa A5c access point, aimed in different directions, for 2x spectrum reuse, superior range and noise rejection at collocation and tower sites.
Key Features
Industry-Leading Front-to-Back Ratio for 2x Spectrum Reuse
World-Class Noise Rejection
High-Gain for Long Distances
Wideband 4.9–6.4 GHz Sector
Reject Noise and Synchronise
Overcoming noise at tower sites is key to scaling capacity. The N5-45x2 delivers industry-leading side lobe rejection and an unprecedented 43 dB front-to-back (FTB) performance — the highest FTB ratio of any sector or horn antenna in the industry. Compatible with any third-party, 2x2 MIMO radio solution, there’s no higher performance antenna in the industry.
Wideband Operation
Supporting 4.9 GHz public safety applications and multipoint licensed operation up to 6.4 GHz, where regulations allow, the N5-45x2 provides an additional 800 MHz of spectrum beyond the crowded 5.15–5.85 GHz unlicensed channels.
Go the distance
The Mimosa N5-45x2 offers the best of both worlds — a long distance, high gain sector with the superior noise isolation of a horn. Competitive sectors offer high-gain, but fail to reduce side lobe and front-toback noise. Symmetric horn antennas achieve good noise isolation, but typically offer lower gain and inefficient symmetrical ground coverage patterns.
Compatible with Third-Party Radios
Blending the best of sector antennas with the best features of a horn, the Mimosa N5-45x2 is a great sector antenna choice to use with any 2x2 MIMO radio. Even better, the ultra-wide 9º vertical beamwidth covers substantially more ground than other leading sector antennas.
Product Features:
Industry-Leading Front-to-Back Ratio for 2x Spectrum Reuse
World-Class Noise Rejection
High-Gain for Long Distances
Wide-band 4.9GHz – 6.4GHz Sector
Antenna Specifications:
Gain: 19dBi
Polarization: Slant 45°
Azimuth Beamwidth (3 dB): 42°
Elevation Beamwidth (3 db): 9°
Electrical Downtilt: 2°
Front-to-Back Ratio (min): 43dB
Cross-Polar Isolation: >30dB
Port-to-Port Isolation: >10dB
Impedance: 50 Ω
Max Input Power: 30dBm
Physical Specifications:
Dimensions: Height: 427mm (16.81”) Width: 143mm (6.63”) Depth: 76mm (3.0”) including connectors
Shipping Box Dimensions: Height: 662mm (26.06”) Width: 166mm (6.53”) Length: 100mm (3.94”)
Weight: 2.81kg (6.2lbs)
RF Connectors: 2 N-type female (includes two 1 meter LMR 240 Type-N to Type-N cables)
RF Connectors Position: Back of antenna, near center
Enclosure Characteristics: Outdoor, UV stabilized, engineered polymer
Mounting: Galvanized steel, dual attached pole mount with 20° mechanical up or down tilt. Two mounting brackets included. For pole sizes, maximum is 3.5” (90 mm) and minimum is 1.5” (38 mm).
Wind Survivability: 200 km/h (125 mph)
Wind Loading: 4.77 kg @ 160 km/h (10.49lbs @ 100 mph)
Environmental:
Outdoor Ingress Protection Rating: IP55
Operating Temperature: -40°C to +55°C (-40°F to 131°F)
Operating Humidity: 5 to 100% condensing
Operating Altitude: 4,420 m (14,500’) max
Shock & Vibration: ETS 300-019-2-4 class 4M5
RoHS Compliance: Yes
Product Includes:(1) N5-45x2 Sector Antenna(1) User Manual(2) Mounting Brackets
Rotary microscreen drum filters are ideal for the removal of fine suspended solids in recirculating systems where water reuse strategies are imperative—zoos, aquariums, greenhouses, aquaculture systems, wastewater treatment plants, and more. HydroTech drum screen filters are trusted by facilities worldwide for critical filtration needs. Constructed of the highest-quality materials and engineered for the rigors of commercial aquaculture, they provide exceptional reliability and a long service life. Designed with the needs of the commercial operator in mind, the filters are also inexpensive to operate.
We stock a wide range of filter screens for HydroTech Drum Filters.
The OxyGuard Polaris C MaxiTemp is a small electronic thermometer specially designed to meet the demands of fish farmers and other professional people for a rugged, reliable and accurate thermometer with data logging function. It has a measuring range of -5 to +45°C with an accuracy of +/- 0.1°, and will measure up to +60°C with an accuracy of +/- 0.2°C. The probe is manufactured in plastic and sea-water resistant stainless steel, and is connected to the display with a 1.5 m cable. Both probe and display are sealed and waterproof.
Values can be stored either automatically at preset time intervals, or manually. You can group values according to the place of measurement. Stored values can be transferred to a PC using the Polaris Link, which connects to the PC via a USB cable.
Inox stainless steel cartridges from SPECTRUM are the most durable range of cartridges available. 316L stainless steel meshes are resilient in the toughest of fluid environments of high pressure, temperature and aggressive chemicals and when used for solid particle removal, they benefit from being reusable after a cleaning process.The Inox Economic cartridges are all-welded with a cylindrical stainless-steel mesh surface, they are supplied complete with gaskets for sealing into the housing and a wide range of micron ratings are available.Features and information
Available in either a cylindrical or pleated stainless steel configuration, using no resin or glue-based binders, these reusable cartridges offer a perfect choice for high temperature applications
The cartridges are offered in 5 to 850 micron with end cap options of 222 and 226
The pleated construction of the SPS delivers an extra 0.1m2 of surface area versus the cylindrical cartridge for improved flow and dirt holding
Suited to heavily contaminated applications and as prefiltration before expensive, disposable, final filters
For challenging, industrial environments, a pleat protector cage option is available on the SPS
Applications & Industries
High temperature specification
Caustic fluids
Petrochemicals
Corrosive liquids and gases
Chemical solutions
Straining
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
For use in the PBH plastic bag housings, this range of bags proves a simple and economic solution for the removal of particulate. PBH bags are uniquein design, fitting in an internal support basket to maximise the filtration surface area and are easy for operators to changeout. Available in washable nylon mesh in 50 to 600 micron and in polypropylene felt in 1 to 200 micron.BN Series (Strainer)
Woven monofilment materials are offered in nylon with micron ratings of 50 to 800
Efficiencies from 75 to 95 percent
Materials are cleanable and reusable
Features and Benefits
Semi-rigid cylindrical design is easily crushed and incinerated
For use with Pentair Pentek PBH-410 Housing
Higher productivity – faster bag “change-outs”
Thermally welded unique design results in consistent filtration efficiencies
Nominal 1-800 micron ratings
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
