The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. ACS-1 series uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.
Aquafilter offers FCPS cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polypropylene filter media, FCPS series removes solids in suspension in a wide range of micron rating, protecting your water stream and enhancing a continuous supply of fresh and clean drinking water.
Aquafilter FCCST2 10" Water softening and iron reducing cartridge. Aquafilter FCCST2 cartridges are an effective and efficient solution for point-of-use applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters, preventing media particles from being washed out. Cartridges are available in various capacities to meet Customer demands. FCCST2 was designed to allow optimal contact between water and resin, therefore ensuring maximum performance (ion exchange). FCCST2 utilizes FDA-grade, sodium, based, strongly acidic ion exchange resin which reduces calcium and magnesium ions content and lowers the concentration of iron in water. Calcium and magnesium are often called "hardness minerals". Large amounts of these ions in water are responsible for the formation of the scale deposits, higher detergent consumption and stains on glassware. In extreme cases large amounts of calcium and magnesium can lead to glass etching. Hard water damages home appliances such as: tea kettles, dishwashers and washing machines, and increases their energy consumption. Hard water leaves an invisible film on skin, which blocks pores. This in turns causes chapping, itching and dryness. Iron imparts a disagreeable taste to the water. It can ruin the taste of tea, coffee and beverages. Iron compounds create yellow to dark-brown stains on equipment. Iron salts irritate skin. Water, after passing through FCCST2, is softened and contains almost no calcium & magnesium, as well as iron. It enables people to use lesser quantities of soap, shampoo, and skin care products. Moreover, detergent consumption is reduced. Aquafilter FCCST2 can be used in every POU application where soft water containing no iron is required.Specifications:
Media: FDA approved ion exchange resin
Filter Life: 3 - 6 months
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Aquafilter FCPS5M10B 10" Big Blue series cartridges are NSF certified using FDA approved polypropylene for material requirements. The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. FCPS5M10B uses no resin binders, lubricants, antistatic or release agents or other chemical additives. The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibres into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water. Polypropylene fibers are chemical resistant and prevent development of microorganisms. In addition, these filter cartridges effectively protect expensive home appliances and residential pluming systems. FCPS5M10B series cartridges are an ideal true depth filters and can be used for filtration of cold potable water. Aquafilter wide range of melt-blown cartridges has multiple fiber zones. These multi-fibre zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fibre zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. Aquafilter melt-blown filters demonstrate true graded depth filtration, the results are long filter service life, therefore lower consumable costs. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.Specifications:
Filter media: PP
Filter life: 6-12 months
Min. feedwater temp. 2°C
Max. feedwater temp. 80°C
Nominal micron rating: 5
Lengths: 10"
Outer diameter: 2 1/2”
Inner diameter: 1.1”
Avg. Efficiency: 90%
Aquafilter FCPS5-AB / FCPS20-AB Melt-blown antimicrobial/antibacterial polypropylene filter cartridge. These durable melt-blown water filter cartridges are the only cartridges available treated with Antimicrobial/Antibacterial nanosilver BACINIX technology. This technology is new to the water filter industry and Aquafilter is the only firm offering this advanced technology within a wide range of product lines. Antimicrobial/Antibacterial technology has been used in the medical industry and is branching out into water treatment industries. This technology helps destroy bacteria as well as inhibit the growth of mold. The blue color of the filter indicates that it has been treated for additional safety. The Aquafilter range of melt-blown cartridges have multiple fibre zones. These multi-fiber zones provide a graded pore structure throughout the filter’s depth. Our filter cartridges have been designed to capture and retain contaminants throughout the entire cross section of the filter. The multiple fiber zones give our filter cartridges a major competitive advantage over other melt-blown filters with fewer pore size gradients in their structure. The new, modern, automatic manufacturing equipment used to produce our wide range of melt-blown cartridge filters delivers consistently efficient filters at low costs.
Aquafilter FCCST 10" Water softening cartridge. FCCST utilizes FDA-grade, sodium, based, strongly acidic ion-exchange resin which reduces calcium and magnesium ion content in water. Calcium and magnesium are often called "hardness minerals". Large amounts of these ions in water are responsible for the formation of scale deposits, higher detergent consumption and stains on glassware. In extreme cases large amounts of calcium and magnesium can lead to glass etching. Hard water damages home appliances such as: tea kettles, dishwashers and washing machines, and increases their energy consumption. Hard water leaves an invisible film on skin, which blocks pores. This in turns causes chapping, itching and dryness. Softened water contains almost no calcium & magnesium. It enables people to use lesser quantities of soap, shampoo, and skin care products. Moreover, detergent consumption is reduced. Aquafilter FCCST can be used in every POU application where soft water is required. Aquafilter FCCST series cartridges are an effective and efficient solution for POE and POU applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters, preventing media particles from being washed out. Cartridges are available in various capacities to meet Customer demands. FCCST was designed to allow optimal contact between water and resin therefore ensuring maximum performance (ion exchange).Specifications:
Media: FDA approved ion exchange resin
Filter Life: 3 - 6 months
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
The Aquada 2/4 replacement lamp is a UV-C water disinfection lamp that is designed to replace the original lamp in the Aquada 2/4 water disinfection system. The replacement lamp is identical to the original lamp in terms of wavelength, power output, and lifespan.
The Aquada 2/4 replacement lamp is easy to install. Simply remove the old lamp from the system and install the new lamp in its place. The new lamp will automatically turn on and start disinfecting the water.
The Aquada 2/4 replacement lamp is a safe and effective way to keep your water clean and free of bacteria, viruses, and other microorganisms. It is important to note that the lamp should not be used in water that is intended for human consumption.
Here are some of the benefits of using the Aquada 2/4 replacement lamp:
Safe and effective: The Aquada 2/4 replacement lamp is safe to use and does not produce any harmful chemicals.
Long lifespan: The Aquada 2/4 replacement lamp has a lifespan of up to 10,000 hours, which means you will need to replace it less often.
Easy to install: The Aquada 2/4 replacement lamp is easy to install and can be done by anyone.
If you are looking for a safe and effective way to keep your water clean, the Aquada 2/4 replacement lamp is a good option. It is a long-lasting lamp that is easy to install and use.
Part number: NLR1845
Wavelength: 254 nm
Power output: 45 watts
Lifespan: Up to 10,000 hours
Aquafilter AIFIR-200 In-line ionizing water cartridge. Ionizing In line cartridge in transparent housing. Contains a mixture of bioceramic media , which increases ph and lowers ORP down. Enriches water with calcium and magnesium , essential for human organism. Utilizes BACinix nonosilver technology, which protect the cartridge from microbiological growth, increasing its longevity.
Aquafilter FCCST10BB 10" Big Blue Water softening cartridge. FCCST10BB utilizes FDA-grade, sodium, based, strongly acidic ion-exchange resin which reduces calcium and magnesium ion content in water. Calcium and magnesium are often called "hardness minerals". Large amounts of these ions in water are responsible for the formation of scale deposits, higher detergent consumption and stains on glassware. In extreme cases large amounts of calcium and magnesium can lead to glass etching. Hard water damages home appliances such as: tea kettles, dishwashers and washing machines, and increases their energy consumption. Hard water leaves an invisible film on skin, which blocks pores. This in turns causes chapping, itching and dryness. Softened water contains almost no calcium & magnesium. It enables people to use lesser quantities of soap, shampoo, and skin care products. Moreover, detergent consumption is reduced. Aquafilter FCCST10BB can be used in every POU application where soft water is required. Aquafilter FCCST10BB series cartridges are an effective and efficient solution for POE and POU applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters, preventing media particles from being washed out. Cartridges are available in various capacities to meet Customer demands. FCCST10BB was designed to allow optimal contact between water and resin therefore ensuring maximum performance (ion exchange).Specifications:
Media: FDA approved ion exchange resin
Filter Life: 3 - 6 months
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Aquafilter FCCST20BB 20" Big Blue Water softening cartridge. FCCST20BB utilizes FDA-grade, sodium, based, strongly acidic ion-exchange resin which reduces calcium and magnesium ion content in water. Calcium and magnesium are often called "hardness minerals". Large amounts of these ions in water are responsible for the formation of scale deposits, higher detergent consumption and stains on glassware. In extreme cases large amounts of calcium and magnesium can lead to glass etching. Hard water damages home appliances such as: tea kettles, dishwashers and washing machines, and increases their energy consumption. Hard water leaves an invisible film on skin, which blocks pores. This in turns causes chapping, itching and dryness. Softened water contains almost no calcium & magnesium. It enables people to use lesser quantities of soap, shampoo, and skin care products. Moreover, detergent consumption is reduced. Aquafilter FCCST20BB can be used in every POU application where soft water is required. Aquafilter FCCST20BB series cartridges are an effective and efficient solution for POE and POU applications. Their undeniable benefit is ease of installation and changeout. Cartridges include pre- and post-filters, preventing media particles from being washed out. Cartridges are available in various capacities to meet Customer demands. FCCST20BB was designed to allow optimal contact between water and resin therefore ensuring maximum performance (ion exchange).Specifications:
Media: FDA approved ion exchange resin
Filter Life: 3 - 6 months
Operating Pressure: 6 bar
Minimum Temperature: 2ºC
Maximum Temperature: 40°C
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Aquafilter FCCA 10" combination of NSF approved coconut shell activated carbon and speciality media provides efficient removal of contaminants from potable water. GAC-type cartridges are designed such that where water flows from bottom to top, ensuring long contact time and allowing for maximum adsorption and treatment. Due to the unique formula developed by our R&D Department, the GAC cartridges made by Aquafilter are capable of water softening and scale prevention and reduction in addition to traditional product competencies. They also remove chlorine and organic contaminants, heavy metals from water (i.e. lead, copper, mercury) as well as radioactive particles (cesium, strontium). The cartridges are excellent for taste and odour improvement.Specifications:
Media: NSF approved Coconut Shell GAC, zeolite
Filter Life: up to 6 months
Size : 10” x 2 1/2”
Operating Pressure: 6 bar
Min. feedwater temp. 2°C
Max. feedwater temp. 55°C
Contaminant Removal: Chlorine, VOC's, heavy metals, reduces water hardness
End caps: PP
Gasket: Silicone
Body: HDPE
Post-filter: PP
Please note that the probe is replaceable on this unit.The Milwaukee Waterproof pH51 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, pools and many other applications.
The Milwaukee pH51 pH tester offers:
ACCURACY
The Waterproof pH51 tester is accurate to ±0.1 pH and is easy to read.
With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.
LONG LIFE
The tester comes with a replaceable pH probe with a double junction probe designed for longer life.
FAST RESPONSE
The probe is double junction allowing quick, accurate pH readings and respose times.
WATERPROOF CONSTRUCTION
No more worries about dropping your tester while measuring. The pH51 is waterproof to IP65.
LIGHT WEIGHT
At just 3.5 ounces, the pH51 is easy to handle at up to half the weight of other testers.
EASE-OF-USE
A large LCD screen makes reading results easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper.
DESIGN FEATURES
Fast easy to read results with large digital LCD readout.
Extreme pH accuracy to ±0.1 pH with a pH range (0.0 pH to 14.0 pH).
Lightweight and portable.
Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
Simple manual one or two-point calibration.
Gel-filled, double junction pH electrode for low maintenance and high performance.
Fully waterproof to IP65.
Over 1500 hours of continuous battery life (batteries included).
Replaceable pH electrode.
CARE AND USE
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!
Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.
Thank you for considering Milwaukee to help you take your results to the next level.
Philips TUV 15W G15T8 ultraviolet lamp.
Emits uv-c light at a wavelength of 254 nm.
Used for Air, Water and Surface Disinfection.
Used in Drinking Water Systems, Air Purification Units and Pond UV Filters.
Philips G15T8 lamps have a life of 9000 hours.
After this time, the lamp should be replaced as the amount of uv-c light will diminish.
Length – 451mm.
Base – G13.
