The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring.
The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years.
The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”.
OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today.
*Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
Hand-held oxygen and temperature meter with NFC and Bluetooth technology
The Polaris C LDO Optical meter is an almost maintenance free meter for measuring dissolved oxygen and temperature. The meter is sturdy, easy to use and has an extensive longevity making it ideal for harsh conditions.Polaris C LDO can store up to 2500 complete set of data, including time and date stamps. The logged data can be stored either manually or automatically with the possibility to group the data into categories.
The stored data can be uploaded directly to Cobália using Bluetooth technology. Scan the Cobália NFC tag on the tank and all data will be uploaded to your “digital farm”. Tank specific data assigned to the tags will be stored in Cobália for analysis on temporal variation, generation of graphs and for multivariable analysis on performance.
The meter has a built-in self-check of all hardware, it compensates automatically for barometric pressure and it has a notably short response time. With this meter, you get the high-quality associated with OxyGuard technology and a product that will serve you well for many years.
The OxyGuard Polaris C Redox is a hand-held, pocket-size pH meter designed for use in demanding, wet environments for heavy-duty use. The meter itself and the electrode assembly are waterproof. This instrument does not suffer from the classical problems associated with pH/Redox meters – this Redox meter is sealed so that water cannot enter the top of the electrode or the electronics. You can drop it into the water without damaging it. In the Polaris C Redox these advantages are combined with microprocessor technology to provide an instrument that is exceptionally easy to use.
Measuring Range: +/- 1500 mV
The Polaris C Salinity is a hand-held instrument specially designed for aquaculture use. Factory calibration and automatic temperature compensation make it very easy to use. The display shows the salinity directly. Temperature is also measured and shown in the display.
The instrument incorporates automatic check functions to ensure reliability. The probe is designed to be as trouble-free as possible, with features specially suited for aquacultural use. Inductive technology is used so that you don’t have to worry about deposits on the surface of the probe – all you have to do is ensure that the hole in the probe is open and relatively clean.
The OxyGuard Polaris C TGP (Total Gas Pressure) is a hand-held gas pressure meter. It can operate in three modes, one where it acts as a standard Handy Polaris dissolved oxygen (DO) meter, one where it is a total gas pressure meter that shows pressures as percent saturation values and one where it is a total gas pressure meter that shows pressures as volume percentages.
The user can choose which value is shown in large figures in the display. This can, for example, be the percent saturation value for gases other than oxygen.
The instrument incorporates a data logger. Messages on the display, and menu functions, make the Polaris C TGP easy to use.
Marlin is a single-channel measurement transmitter instrument explicitly designed for use in aquaculture.
One of the critical advantages of Marlin is its water resistance, which means it can be used in various wet environments without fear of damage.
You can order Marlin with the probe of your choice to meet your specific needs:
Dissolved oxygen (electrochemical or optical)
Carbon Dioxide (CO2)
pH/Redox
Total Gas Pressure (TGP)
Temperature
Salinity
Ozone
Any other probe with 4-20 mA input (e.g. Model 420)
Compatibility:
Marlin features a 4-20mA output and MODBUS/TCP for PLC/SCADA compatibility, making integrating your existing systems easy.
It is also Cobália compatible, ensuring seamless communication with the Cobália digital management system.
Whether running a commercial aquaculture operation or simply monitoring the water quality in your backyard pond, Marlin is the perfect tool!
Download Brochure
The Model 420 is a membrane covered galvanic oxygen probe with built-in two-wire 4-20 mA transmitter. The probe is connected to a DC supply and draws a current of between 4 and 20 mA corresponding to the oxygen concentration.
There are only two wires to connect, and there is no limit to cable length. The output signal is galvanically isolated from the built-in electronics and the process fluid. Interference between the Model 420 and other equipment can never occur!
The OxyGuard Model 420 can therefore be connected directly to a wide range of equipment that can accept a 4-20 mA input, such as alarms, indicators, controllers, recorders, PLC’s, PC systems with A/D input etc.
The Model 420 can also be used to measure gaseous oxygen concentration.
D033 OxyGuard Model 420 DO Probe for 4-20mA
