With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.
With higher efficiency and a longer service life than both the Economic and Standard spun, the PSP is the most versatile and adept cartridge in the TruDepth range. The deep grooved construction significantly increases the surface area, maximising the dirt holding capacity of the cartridge whilst the integral support core increases pressure and temperature operating conditions. Available with a range of end-caps for added seal security and operator ease for fitting in multi-round housings.
Protect your home, health, and appliances by filtering your water. The ACC-2 Aquafilter Granular Activated Carbon Filter removes major contaminants from your water supply and provides clean water for drinking, showering, cooking, and other home uses. The GAC removes major water contaminants like Chlorine, Total Organic Carbon (TOC), Pharmaceuticals, Turbidity, Volatile Organic Chemicals (VOC), Herbicides, Industrial Solvents, Insecticides, Pesticides, and Chemicals causing bad tastes, odours, and more. The UDF type filter is vacuum sealed and complete with a polypropylene shell, a thermal bonded cap, and an industrial sealed silicon ring to make sure its durable and reliable. Filter your water with high quality coconut carbon for maximum chemical absorption. Choose the filter that lasts longer to give you the best value in filtration.
Aquafilter offers FCCBHD cartridges (FCCHD5, FCCBHD-STO, FCCBHD, FCCBHD-L, FCCBHD10BB, FCCBHD20BB) suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its granular activated carbon (GAC) media, FCCBHD cartridges improves the bad taste and odour of your drinking water. By reducing the concentration of chlorine and organic compounds (VOC’s), FCCBHD series enhances the continuous supply of fresh and clean drinking water.
Marlin is a single-channel measurement transmitter instrument explicitly designed for use in aquaculture.
One of the critical advantages of Marlin is its water resistance, which means it can be used in various wet environments without fear of damage.
You can order Marlin with the probe of your choice to meet your specific needs:
Dissolved oxygen (electrochemical or optical)
Carbon Dioxide (CO2)
pH/Redox
Total Gas Pressure (TGP)
Temperature
Salinity
Ozone
Any other probe with 4-20 mA input (e.g. Model 420)
Compatibility:
Marlin features a 4-20mA output and MODBUS/TCP for PLC/SCADA compatibility, making integrating your existing systems easy.
It is also Cobália compatible, ensuring seamless communication with the Cobália digital management system.
Whether running a commercial aquaculture operation or simply monitoring the water quality in your backyard pond, Marlin is the perfect tool!
Download Brochure
The Mimosa B5x is one of the industry’s fastest unlicensed, point-to-point (PTP), backhaul solutions. It’s ideal for short to medium range relay and tower links, custom-engineered collocation, and licensed 4.9 GHz spectrum. It’s modular, with the ability to connect X-series compatible twist-on antennas (12 dBi horn, 16 dBi horn, 20 dBi dish, 25 dBi dish).
Mimosa B5x Key Features
Wide Frequency Range
Beamforming Technology
Optimised 360º Performance
Fast and Flexible
As one of the highest capacity, unlicensed PTP solutions in the industry, it delivers up to 1.5 Gbps (IP). 160 MHz of aggregate channel capacity and GPS Sync mode provide flexibility for performance.
Double Reliability
Tame unlicensed spectrum interference via custom-engineered multi-channel and auto-everything technology—as good as two smart links in one radio.
Extended Frequency
Rise above the noise with extended frequency support from 4.9–6.4 GHz.
Ultra Rugged
Carrier-grade IP67 design allows the B5x to withstand the harshest of environmental conditions.
Easily Add New Links
The B5x is spectrum friendly. Unique, high-precision GPS Sync technology reuses the same channel network wide. Keep adding more capacity to more sites and waste less spectrum.
Monitor With Ease
Assessing link health and identifying potential problems has never been easier. Links are instantly monitored from the Mimosa management platform.
Product Features:
As one of the highest capacity, unlicensed PTP solutions in the industry, it delivers up to 1.5Gbps (IP). 160MHz of aggregate channel capacity and GPS Sync mode provide flexibility for performance.
Tame unlicensed spectrum interference via custom-engineered multi-channel and auto-everything technology—as good as two smart links in one radio.
Rise above the noise with extended frequency support from 4.9GHz – 6.4GHz.
Carrier-grade IP67 design allows the B5x to withstand the harshest of environmental conditions.
The B5x is spectrum friendly. Unique, high-precision GPS Sync technology reuses the same channel network wide. Keep adding more capacity to more sites and waste less spectrum.
Assessing link health and identifying potential problems has never been easier. Links are instantly monitored from the Mimosa management platform.
Product Specifications:
Max Throughput: Up to 1.5Gbps IP aggregate UL/DL (1.7Gbps PHY)
Latency: <1ms in auto mode
Wireless Protocols: Fixed TDMA and TDMA-FD (Frequency Diversity) with 75:25,m67:33, or 50:50 traffic ratios with 2, 4, or 8ms timeslots; Auto-TDMA
MIMO & Modulation: 4x4:4 MIMO OFDM up to 256QAM
Bandwidth: Single or dual 20/40/80 MHz channels
Frequency Range: 4.90GHz – 6.40GHz; Restricted by country of operation
Max Output Power: 30dBm (1x mode, i.e. single frequency) 27dBm (2x mode, i.e. dual frequency)
Sensitivity (MCS 0): -87dBm @ 80MHz -90dBm @ 40MHz -93dBm @ 20MHz
Integrated Antenna Gain: 8dBi
Max Power Consumption: 20W
System Power Method: 48VDC 802.3at (PoE+) active or passive compliant power injectors
System Lightning & ESD Protection: 6kV
Recommended Power Supply: (not included): 50 VDC passive Gigabit PoE injector
Operating Temperature: -40°C to +55°C (-40°F to 131°F)
Dual Link Operation: 2 independent dual-stream radios operating on non-contiguous frequencies; Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
Management Services: Mimosa management; SNMPv2 & Syslog legacy monitoring; HTTPS; HTML 5 based Web UI
Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels (no service impact); Dynamic auto-optimization of channel and bandwidth use
Security: 128-bit AES PSK with hardware acceleration
QoS: 4 classes of QoS, with user configurable priority queuing, weighted fair queuing, MIR, CIR, and rate limiting
Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated cochannel radios; Adjustable up/downstream bandwidth ratio
Regulatory and Compliance: FCC Part 15.407, IC RSS210, CE, ETSI 301 893/302 502
RoHS Compliance: Yes
Safety: EN 62638-1, CAN/CSA C22.2 No. 62368-1
Product Includes:
(1) Mimosa B5x PTP Backhaul Radio (100-00109)
The GroLight is an underwater light solution, that allows farmers to control the maturation of fish throughout the seasons. The product works seamlessly with the rest of the Gro product line, and is produced and tested to withstand some the harshest weather conditions in the world, with little to no maintenance required.
The OxyGuard TGP probe measures Total dissolved Gas Pressure and is designedspecifically for use with OxyGuard Commander or Pacific systems. It can be addedto existing systems. It contains sensors for dissolved gas pressure and temperature.The gases dissolved in water consist of oxygen and “other gases”. “Other gases” aremainly nitrogen. It is important to measure if the water is supersaturated in order toprevent the fish from getting gas bubble disease.
The Commander or Pacific system to which the probe is connected uses a dissolvedoxygen measurement made by a DO probe placed near the TGP probe forcalculations and presents the degrees of saturation for the total gas, dissolvedoxygen and for “other gas”.
F01 OxyGuard Total Gas Pressure probe
To ensure quality, YSI inspects conductivity solutions with reference to primary standard solutions according to OIML recommendation 56. Bottles include a table of corrections at temperatures between 20 and 30 oC.
For sea water equipment.
Complete spare parts set for each version of FIAP Belt Feeder Standard
The Feeder Standard Spare Parts Set is a complete spare parts set for each version of FIAP Belt Feeder Standard. Its delivery scope comprises clock unit, tension spring, conveyor belt, transparent cover, black cover, drive journal for clock unit and tension spring, as well as a set of screws for the covers.
Auxiliary drive shaft for FIAP Belt Feeder Pro 5 kg
Being made from seawater-resistant aluminium and including a conveyor belt, FIAP Belt Feeder Pro Conveyor Belt is the auxiliary drive shaft for FIAP Belt Feeder Pro available in two different versions (3 and 5 kg). Its innovative, spring-loaded centre bolt allows for removing the entire conveyor belt with a single hand movement.
Manufactured from polycoated 316L stainless steel, the Standard range of multi-round filter housings uses an industry standard V-band clamp to secure the head. The housings have threaded ports and they come supplied complete with a universal cartridge plate.
The Standard range is capable of operating up to 700lpm, with flow rates beyond this capacity requiring the Premier range. From the 7 x 40″ housing down to the 3 x 10″, these smaller vessels do not require the additional heavy duty features of the Premier range, such as Davit assemblies and swing-bolt lids. With gauge ports, drain ports and a universal cartridge adaptor to accept AA, DOE and 222 end capped cartridges, this range offers a competitive solution for smaller flow rate applications.
Key Product Features
V-Clamp closure for a secure seal
Universal cartridge adaptors securely hold 222, DOE or AA cartridges
Drain ports allow for quick and easy cartridge changeout
Gauges ports come fitted with 316L plugs when gauges are not required
Technical Data
SPECTRUM Inox 3/5/7 Standard Filter Housings Technical Data Sheet
Drawings
SPECTRUM Inox Standard Filter Housing 3 Round DrawingSPECTRUM Inox Standard Filter Housing 5 Round DrawingSPECTRUM Inox Standard Filter Housing 7 Round Drawing
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filter.The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges.Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.Material of Construction
Filtration Media: Polypropylene
End caps and Adapters: Polypropylene
Dimensions
Nominal Outside Diameter: 2.50 inch (6.4 cm)
Nominal Inside Diameter: 1 inch (2.5 cm)
Operating Limits
Maximum Differential Pressure:35psi (2.4bar) at =100°F (38°C)
Maximum Temperature: 160°F (71°C) at =15psid (1.0bar)
Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
