Male Aqua-Life's air-tight coupling.
Aqua-Life hose connectors specially made transport of fish. Thickness of material is approx. 2 mm and there is therefore little risk of damage to fish.
Material: Seawater resistant aluminium.
Complete spare parts set for each version of FIAP Belt Feeder Standard
The Feeder Standard Spare Parts Set is a complete spare parts set for each version of FIAP Belt Feeder Standard. Its delivery scope comprises clock unit, tension spring, conveyor belt, transparent cover, black cover, drive journal for clock unit and tension spring, as well as a set of screws for the covers.
Gray manual sorting cradle with curved screen.- Width: 50 cm- Length: 70 cm- Height: 40 cmThe grading cradle is priced without grid. The grading grid must be ordered separately.
Inox stainless steel cartridges from SPECTRUM are the most durable range of cartridges available. 316L stainless steel meshes are resilient in the toughest of fluid environments of high pressure, temperature and aggressive chemicals and when used for solid particle removal, they benefit from being reusable after a cleaning process.Standard cartridges offer these benefits combined with over 3 times the surface area of the cylindrical cartridge by pleating and strengthening the stainless-steel mesh, meaning higher dirt holding for fewer cartridge cleans or for use with heavily loaded fluidsFeatures and information
Available in either a cylindrical or pleated stainless steel configuration, using no resin or glue-based binders, these reusable cartridges offer a perfect choice for high temperature applications
The cartridges are offered in 5 to 850 micron with end cap options of 222 and 226
The pleated construction of the SPS delivers an extra 0.1m2 of surface area versus the cylindrical cartridge for improved flow and dirt holding
Suited to heavily contaminated applications and as prefiltration before expensive, disposable, final filters
For challenging, industrial environments, a pleat protector cage option is available on the SPS
Applications & Industries
High temperature specification
Caustic fluids
Petrochemicals
Corrosive liquids and gases
Chemical solutions
Straining
Inox stainless steel cartridges from SPECTRUM are the most durable range of cartridges available. 316L stainless steel meshes are resilient in the toughest of fluid environments of high pressure, temperature and aggressive chemicals and when used for solid particle removal, they benefit from being reusable after a cleaning process.Premier cartridges utilise the ultimate in material and construction technology to create a fully TIG welded cartridge capable of performance in environments where pressure differentials of 5 bar at temperatures up to 360°C exist.Features & Information
Constructed from all 316L FDA approved stainless steel, the pleated woven media, support core and fitting are TIG (Tungsten Inert Gas) welded to introduce no other materials
Higher dirt-holding capacity than the standard pleated range
The PPS can be cleaned by means of reverse flow, chemical, ultrasonic and high temperature burn-out
PPS make an economical alternative to conventional polymeric cartridges where environmental issues prevent disposal
Operating in conditions at up to 300°C and 25 bar differential pressure, these cartridges have the greatest tolerance of the range
Each cartridge is integrity tested by bubble point in IPA (Isopropyl Alcohol) with data provided at despatch, together with a unique identification number
Applications & Industries
High viscosity, such as gelatine
Magnetic coatings
High temperature specification
Caustic fluids
Petrochemicals
Corrosive liquids and gases
Chemical solutions
Straining
The new SSP97 from SPECTRUM, delivers exceptional 97% efficiency with a low clear pressure drop at an affordable price. Finer fibres used in the construction create a more accurate level of filtration, whilst maintaining a high dirt holding capacity.The SSP97 with its melt-bonded exterior minimises any fibre migration, whilst its single, one piece, graded density and thermally bonded fibre construction made from 100% polypropylene introduces no binders, lubricants, or other additives in its manufacture.Features & Information
High efficiency filtration at an affordable price
Graded density construction, manufactured from 100% polypropylene
Ideal for food and beverage and chemical applications
Where long life, high purity and low change-outs are required, the Purtrex range meets the requirements of most non-critical applications or as an economic pre-filteR.
Description
The patented construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities in standard as well as large diameter options, making it the next generation replacement product to wound and wrongly specified resin-bonded cartridges. Containing no anti-static wetting agents, solvents or binders the Purtrex’s one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Micro-filaments plus precise fibre control maximizes the positive filtration characteristics of the graded density, tight cut-offs and maximum void areas with millions of tortuous paths.
ConstructionFiltration Media: Polypropylene End caps and Adapters: Polypropylene
Operating LimitsMaximum Differential Pressure:35psi (2.4bar) at =100°F (38°C) Maximum Temperature: 160°F (71°C) at =15psid (1.0bar) Recommended Maximum Water Flow: 5 gpm (19L/min) per 10-inch length
YSI 5913 screw-on cap dissolved oxygen membranes for 2002 Galvanic sensors
Includes bottle of NaCl electrolyte, 1 sanding disc, and 6 screw-on cap membranes. 1.25 Mil PE, Polyethylene membrane {Yellow cap). Convenient scew-on cap membranes make membrane changes simple and easy. Response Time (T95 - from 0 to 100%) = 8 seconds Flow Dependence After 4 Minutes = 25% Required Flow Rate = 6 inches/ second.
The ProSolo ODO/T kit includes the digital ProSolo handheld, an optical dissolved oxygen and temperature probe assembly (4 or 10 meter cable length), and a soft-sided carrying case.
OverviewThe ODO/T probe assembly pairs with the ProSolo Handheld to form a complete sampling system. Featuring integral, digital sensors, the ODO/T is plug-and-play which minimizes time spent on instrument setup. Pro DIGITAL technology allows the handheld to automatically recognize connected sensors, so there is no need to tell the instrument what is connected. Optical Dissolved Oxygen (ODO) technology is non-consumptive, meaning oxygen is not consumed during the measurement. Flow dependence is non-existent and no stirring is required, resulting in the most accurate DO measurements available from a probe. The ODO sensor is not susceptible to interferences from other gases, drifts less and holds calibration longer than membrane covered sensors. Maintenance is a breeze with a simple, threaded optical cap that is good for at least two years. The ProSolo Handheld features an easy-to-read color display, large capacity memory, intuitive interface, rechargeable battery, and powerful data management software (KorDSS) for powerful, yet convenient sampling experience. Great for surface water, groundwater, coastal/estuarine, aquaculture, and wastewater applications!
Calibration
400 detailed calibration records can be stored and are available to view, download, and print
Certifications
CEC, CE; RoHS; IP-67; WEEE; FCC; UN Part III, Section 38.3, Test methods for lithium-ion batteries (Class 9)
Data Management
100 user-defined sites and 100 user-defined data ID tags; site pictures can be sent to the handheld via KorDSS
Display
Color, LCD graphic display; 3.9 cm width x 6.5 cm height
Languages
English, Spanish, German, French, Italian, Norwegian, Portuguese, Japanese, Chinese (Simplified & Traditional), Korean, Thai
Logging Capabilities
Single point or continuous with autostable feature
Memory
> 100,000 data sets
Operating Temperature
0 to 50 °C (32 to 122 °F)
Power
Rechargeable lithium-ion battery pack provides ~48 hours with the handheld only; battery recharge time is ~9 hours with the AC power adapter; the instrument can also be powered via AC or external power pack through the USB port
Size
8.3 cm width x 21.6 cm length x 5.6 cm depth (3.27 in x 8.5 in x 2.21 in)
Storage Temperature
0 to 45 °C (32 to 113 °F) with battery installed; 0 to 60 °C (32 to 140 °F) without battery installed
USB
Built-in micro USB On-The-Go port for PC connection, recharging/powering the handheld and connecting directly to a USB stick
Warranty
3-year handheld warranty
Weight
567 grams (1.25 lbs) with battery
YSI ProSolo Quick Start Guide
Manuals
626973-01 | ProDIGITAL User Manual | English
626973-03 | Manuel d'utilisation ProDIGITAL | Français
626973-06 | ProDIGITAL Benutzerhandbuch | Deutsche
626973-04 | Manuale d’uso ProDIGITAL | Italiano
626973-07 | ProDIGITAL 取扱説明書 | 日本人
626973-05 | Manual do Utilizador ProDIGITAL | Português
626973-08 | ProDIGITAL 用户手册 | 中文 (Simplified)
626973-02 | Manual de usuario de ProDIGITAL | Español
626973-09 | ProDIGITAL 用戶手冊 | 中文 (Traditional)
OxyGuard's developed ozone sensor is designed specifically for use in aquaculture. The sensor uses an entirely new innovative technology, and the partial pressure of ozone is measured directly without the use of electrolyte, reagents, light, or other traditional methods. As a result, there is almost no maintenance, the probe is exceptionally stable, and the response time is extremely fast.With the possibility to measure ozone content in the water down to only a few μg/L, it is possible to ensure safe conditions for the stock.
Unit of Measurement: ppm (mg/l) Measuriing Range (Low): 0-0.8mg/l (best between 0 and 0.5) Mesauring Range (High): 0.5-8mg/l Operating Temperature: 0-40C Dimensions: 40 x 104mm Cable Legnth: 7m Response Time: 90% in less than 45s (for the low range type) Medium: Water Installation: For use with Pacific or Marlin
G20 OxyGuard Ozone Sensor Data Sheet
