oxyguard
OxyGuard Calibration Solution for OxyGuard CO2 sensor calibration
Calibration Solution for OxyGuard CO2 sensor calibration
£54.99
OxyGuard Check solution for redox/ORP Probes - 250 ml
Redox Test Solution 250mV +/- 10mV @ 20C P/N K10RCH50
£89.99
OxyGuard Electrolyte Type 1 for OxyGuard Handy Polaris dissolved oxygen meters
Standard electrolyte for OxyGuard Handy Probes
£38.72
OxyGuard Electrolyte Type 3 for OxyGuard on-line dissolved oxygen sensors 1 Litre
Standard electrolyte for Type 3 OxyGuard Probes
£38.34
OxyGuard Membrane installation tool for OxyGuard Handy
Membrane installation tool for OxyGuard Handy
£10.85
OxyGuard Membrane protector for OxyGuard Handy Polaris
Membrane protector for OxyGuard Handy Polaris
£23.63
OxyGuard Oxygen Pacific LDO Oxygen Probe
OxyGuards new optical oxygen probe is developed in cooperation with world leading experts. Based on luminescence quenching of a sensor dye immobilized on a support foil it can be used for gas measurements as well as for dissolved oxygen (DO). The presence of molecular oxygen quenches the luminescence, changing its intensity and lifetime fully reversibly. The measurement principle is very robust. It shows virtually no interference to other gases and has very low drift. Bleaching is not an issue because low energy red light excites the sensor spot and emission is NIR. Special features High-accuracy measurements of oxygen in gas or water (DO) Low drift Long lifetime Fast response Digital output of all major oxygen units Technical Data Sheet
£1,610.40
OxyGuard OxyGuard Atlantic Single Channel Dissolved Oxygen Meter
The OxyGuard Atlantic is an accurate, reliable and easy to use oxygen meter with features ideal for use in aquaculture facilities such as shrimp farms, carp farms and other installations with individual, large ponds. It measures both dissolved oxygen and temperature, and has 4 relay outputs. The dissolved oxygen measurement is compensated for atmospheric pressure, which permits accurate control of aerators. The user can link setpoints to parameters as desired. Setpoints can then be linked to output relays. It is also possible to link setpoints together. This permits, for example, an aerator to be started both from a DO setpoint and a temperature set point. Download Brochure
£1,084.82
OxyGuard OxyGuard Commander Dissolved Oxygen/Temperature Probe
The OxyGuard Commander probe is a membrane covered galvanic cell that generates an electrical signal proportional to the oxygen pressure it senses. The probe is designed for use in applications across the aquaculture industry and is capable of measuring oxygen in clean water, waste water, and air for ambient monitoring. It requires neither an applied voltage nor microprocessor controlled electronics in order to function. Even in the most demanding aquaculture applications the OxyGuard Commander probe can keep its calibration for about a year and operate for three to five years before membrane replacement is needed.
£560.40
OxyGuard OxyGuard DO Probe c/w NTC Sensor for mg/l (ppm)
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring. The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years. The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”. OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today. *Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
£636.00
OxyGuard OxyGuard DO Probe with built in PT100 Temperature Sensor
The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring. The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years. The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”. OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today. *Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.
£481.20 - £636.00
OxyGuard Oxyguard Handy Accessory Kit
Oxyguard Handy Accessory Kit for Handheld Units. Includes: 10 membranes & o-rings 50ml electolyte Tool Cathode Cleaning Pad
£32.27