Products


  • Electrolyte Type 1 for OxyGuard Handy Polaris dissolved oxygen meters Calibration Solution OxyGuard

    OxyGuard Electrolyte Type 1 for OxyGuard Handy Polaris dissolved oxygen meters

    Standard electrolyte for OxyGuard Handy Probes

    £38.72

  • Electrolyte Type 3 for OxyGuard on-line dissolved oxygen sensors 1 Litre Calibration Solution OxyGuard

    OxyGuard Electrolyte Type 3 for OxyGuard on-line dissolved oxygen sensors 1 Litre

    Standard electrolyte for Type 3 OxyGuard Probes

    £38.34

  • Last stock! Membrane installation tool for OxyGuard Handy Handheld Spares OxyGuard

    OxyGuard Membrane installation tool for OxyGuard Handy

    Membrane installation tool for OxyGuard Handy

    £10.85

  • Membrane protector for OxyGuard Handy Polaris Handheld Spares OxyGuard

    OxyGuard Membrane protector for OxyGuard Handy Polaris

    Membrane protector for OxyGuard Handy Polaris

    £23.63

  • Oxygen Pacific LDO Oxygen Probe Probe OxyGuard

    OxyGuard Oxygen Pacific LDO Oxygen Probe

    OxyGuards new optical oxygen probe is developed in cooperation with world leading experts. Based on luminescence quenching of a sensor dye immobilized on a support foil it can be used for gas measurements as well as for dissolved oxygen (DO). The presence of molecular oxygen quenches the luminescence, changing its intensity and lifetime fully reversibly. The measurement principle is very robust.  It shows virtually no interference to other gases and has very low drift. Bleaching is not an issue because low energy red light excites the sensor spot and emission is NIR. Special features High-accuracy measurements of oxygen in gas or water (DO) Low drift Long lifetime Fast response Digital output of all major oxygen units Technical Data Sheet

    £1,610.40

  • OxyGuard Atlantic Single Channel Dissolved Oxygen Meter Static System OxyGuard 24vDC

    OxyGuard OxyGuard Atlantic Single Channel Dissolved Oxygen Meter

    The OxyGuard Atlantic  is an accurate, reliable and easy to use oxygen meter with features ideal for use in aquaculture facilities such as shrimp farms, carp farms and other installations with individual, large ponds. It measures both dissolved oxygen and temperature, and has 4 relay outputs. The dissolved oxygen measurement is compensated for atmospheric pressure, which permits accurate control of aerators. The user can link setpoints to parameters as desired. Setpoints can then be linked to output relays. It is also possible to link setpoints together. This permits, for example, an aerator to be started both from a DO setpoint and a temperature set point. Download Brochure

    £1,084.82

  • OxyGuard Commander Dissolved Oxygen/Temperature Probe Probe OxyGuard

    OxyGuard OxyGuard Commander Dissolved Oxygen/Temperature Probe

    The OxyGuard Commander probe is a membrane covered galvanic cell that generates an electrical signal proportional to the oxygen pressure it senses. The probe is designed for use in applications across the aquaculture industry and is capable of measuring oxygen in clean water, waste water, and air for ambient monitoring. It requires neither an applied voltage nor microprocessor controlled electronics in order to function. Even in the most demanding aquaculture applications the OxyGuard Commander probe can keep its calibration for about a year and operate for three to five years before membrane replacement is needed.

    £560.40

  • OxyGuard DO Probe c/w NTC Sensor for mg/l (ppm) Probe OxyGuard

    OxyGuard OxyGuard DO Probe c/w NTC Sensor for mg/l (ppm)

    The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring. The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years. The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”. OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today. *Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.

    £636.00

  • OxyGuard DO Probe with built in PT100 Temperature Sensor Probe OxyGuard For mg/l (ppm)

    OxyGuard OxyGuard DO Probe with built in PT100 Temperature Sensor

    The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring. The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open it to replace the membrane and renovate it completely, but this should not be needed for many years. The measurement stability of the OxyGuard Standard Probe is also very high indeed. A probe measuring in air will maintain accuracy even when subjected to a sudden 20 degree celcius temperature change. The sensitivity of a probe measuring in clean air at room temperature will remain the same for at least 3 years. This proves that the OxyGuard probe is not, like some other probes, affected by “ageing”. OxyGuard believe that the OxyGuard Standard probe is more accurate, needs less attention and maintenance and has a lower total cost of ownership than any other oxygen or dissolved oxygen probe offered to the aquaculture industry today. *Accessories are shipped with every OxyGuard probe. You will thus be able to change the membrane if you manage to damage it during installation. Otherwise the accessories can be enough for up to 5 years’ use.

    £481.20 - £636.00

  • Last stock! Oxyguard Handy Accessory Kit Handheld Spares OxyGuard

    OxyGuard Oxyguard Handy Accessory Kit

    Oxyguard Handy Accessory Kit for Handheld Units. Includes: 10 membranes & o-rings 50ml electolyte Tool Cathode Cleaning Pad

    £32.27

  • OxyGuard Handy Atmosphere for measuring oxygen Handheld Meter OxyGuard O2 in Gas

    OxyGuard OxyGuard Handy Atmosphere for measuring oxygen

    The Handy Atmosphere is a hand-held meter designed to measure oxygen in gas. It can be used to measure the low oxygen content of packaging gas, the oxygen content of the air and the purity of oxygen gas from oxygen generators and the like. DescriptionThe OxyGuard Handy Atmosphere is a hand-held meter designed to measure oxygen in gas. It can be used to measure the low oxygen content of packaging gas, the oxygen content of the air and the purity of oxygen gas from oxygen generators and the like. A separate brochure is found for a version designed to measure the oxygen content of the modified atmosphere inside food packages. Signal processing is performed using a microprocessor, which gives a number of advantages. Just as with other Handy instruments you can simply switch on and measure, but the use of microprocessor technology enables measurements to be supported by a range of advanced functions designed to make things even easier for you: Features Automatic Calibration Choice of Language Oxygen, temperature, barometric pressure. Automatic self-check Automatic Probe Check Barometric Pressure Compensation Extremely long battery life Technical Data Sheet H02A OxyGuard Handy Atmosphere

    £1,038.00 - £1,112.40

  • Last stock! OxyGuard Handy MaxiTemp 2 Thermometer Handheld Meter OxyGuard

    OxyGuard OxyGuard Handy MaxiTemp 2 Thermometer

    The OxyGuard MaxiTemp 2 is a small electronic thermometer specially designed to meet the demands of fish farmers and other professional people for a rugged, reliable and accurate thermometer with data logging function. Description The OxyGuard Handy MaxiTemp 2 temperature meter, is a small electronic thermometer specially designed to meet the demands of fish farmers and other professional people for a rugged, reliable and accurate thermometer with data logging function. It has a measuring range of -5 to +45°C with an accuracy of +/- 0.1°, and will measure up to +60°C with an accuracy of +/- 0.2°C. The probe is manufactured in plastic and sea-water resistant stainless steel, and is connected to the display with a 1.5 m cable. Both probe and display are sealed and waterproof. Values can be stored either automatically at preset time intervals, or manually. You can group values according to the place of measurement. Stored values can be transferred to a PC using the Polaris Link, which connects to the PC via a USB cable. The MaxiTemp is 96mm in diameter by 36mm. For a meter to read oxygen and temperature please have a look at the OxyGuard Handy Polaris C. H03B OxyGuard Handy MaxiTemp Thermometer

    £337.96


© 2024 GroAqua, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account